Journal of the Air & Waste Management Association

Our medical research library holds 9 studies published in Journal of the Air & Waste Management Association (2000–2023). Each entry links to the study's record on PubMed and, where there is one, to the publisher's page and a free full text. 9 have an abstract, the authors' own summary as PubMed records it: open "Abstract" to read it.

About the journal

• Publisher: Taylor & Francis
• Published: 1995 to the present, United States
• Language: English
• ISSN: 1096-2247 (print), 2162-2906 (electronic)
• Continues: Air & Waste
• Its record in the NLM Catalog

2020s

• Mineral extraction from asbestos-containing waste (ACW) and changes in its morphology during treatment with ammonium salts. S. Park, Y.S. Bong, G. Kim. 2023;73(4):285-294. PubMed · Publisher

  Abstract

  Asbestos is a known carcinogen and a banned hazardous material. However, the generation of asbestos-containing waste (ACW) is increasing because of the demolition of old constructions, buildings, and structures. Therefore, asbestos-containing wastes need to be effectively treated to render them harmless. This study aimed to stabilize asbestos wastes by using for the first time three different ammonium salts at low reaction temperatures. The treatment was performed with ammonium sulfate (AS), ammonium nitrate (AN), and ammonium chloride (AC) at concentrations of 0.1, 0.5, 1.0, and 2.0 M and reaction times of 10, 30, 60, 120, and 360 min intervals at 60 °C. Asbestos waste samples were treated in both plate and powder form during the experiment. The results demonstrated that the selected ammonium salts could extract the mineral ions from asbestos materials at a relatively low temperature. Concentrations of the minerals extracted from powdered samples were higher than those extracted from plate samples. AS treatment demonstrated better extractability compared to that of AN and AC, based on the concentrations of magnesium and silicon ions in the extract. The results implied that among the three ammonium salts, AS had better potential to stabilize the asbestos waste. This study demonstrated the potential of ammonium salts for treating and stabilizing asbestos waste at low temperatures by extracting the mineral ions from the asbestos fibers.Implications: This study aims to establish an effective treatment to stabilize the hazardous asbestos waste to harmless forms. We have attempted treatment of asbestos with three ammonium salts (ammonium sulfate, ammonium nitrate, ammonium chloride) at relatively lower temperature. The selected ammonium salts could extract the mineral ions from asbestos materials at a relatively low temperature. These results suppose that asbestos containing materials could change the harmless state by using simple method. Among the ammonium salts, especially, AS has better potential to stabilize the asbestos waste.

• Comparison of melt-blown and glass-fiber HEPA asbestos filters based on ISO filter classes, filtration efficiency, power consumption, and face velocity. S.H. Hwang, B.H. Lee. 2022;72(3):271-280. PubMed · Publisher

  Abstract

  The purpose of this study was to determine the most efficient airborne asbestos filter for use in an HEPA negative air machines through filter performance testing. The filter classes applied conformed with ISO and European standard (EN 1822) regarding fractional efficiency by dust loading amount for filters, fractional efficiency for negative air machines, and consumption of electrical power at filter size 0.3 μm. Class H13 had the highest fractional efficiency among the three experimental filter classes by particle size, at face velocity of (1, 2, and 3) m/s. Melt-blown (MB) filters exhibited higher fractional performance than did glass-fiber filters at all particle sizes tested (0.3, 0.5, and 1.0 µm). The power consumption of glass-fiber filters was higher (at 10 m3/min) than that of melt-blown filters. Therefore, melt blown filters would be more cost-effective than glass fiber filters for use in HEPA negative air machines, for protection against airborne asbestos.Implications: Air cleaner and related systems were developed to control a variety of airborne pollutants in general indoor environments, but there was no certified system for focusing on asbestos fractional efficiency using filter tests. Class H13 had the highest fractional efficiency among the three experimental filter classes by particle size, at face velocity of (1, 2, and 3) m/s. Melt-blown filters exhibited higher fractional performance than did glass-fiber filters at all particle sizes tested (0.3, 0.5, and 1.0 µm). The power consumption of glass-fiber filters was higher (at 10 m3/min) than that of melt-blown filters.

2010s

• Evaluation of asbestos-containing products and released fibers in home appliances. S.H. Hwang, W.M. Park. 2016;66(9):922-9. PubMed · Publisher

  Abstract

  Unlabelled: The purpose of this study was to detect asbestos-containing products and released asbestos fibers from home appliances. The authors investigated a total of 414 appliances manufactured between 1986 and 2007. Appliances were divided into three categories: large-sized electric appliances, small-sized electric appliances, and household items. Analysis for asbestos-containing material (ACM) was performed using polarized light microscopy (PLM) and stereoscopic microscopy. Air sampling was performed to measure airborne concentration of asbestos using a phase-contrast microscope (PCM). The results of the analysis for ACM in appliances show that large-sized electric appliances (refrigerators, washing machines, kimchi-refrigerators) and household items (bicycles, motorcycles, gas boilers) contain asbestos material and small-sized electric appliances do not contain asbestos material. All appliances with detected asbestos material showed typical characteristics of chrysotile (7-50%) and tremolite (7-10%). No released fibers of ACM were detected from the tested appliances when the appliances were operating. This study gives the basic information on asbestos risk to people who use home appliances.

  Implications: All appliances with detected asbestos material showed typical characteristics of chrysotile (7-50%) and tremolite (7-10%). No released fibers of ACM were detected from the tested appliances when the appliances were operating.

• Development of the releasable asbestos field sampler. J.R. Kominsky, J.W. Thornburg, G.M. Shaul, et al. 2010;60(3):294-301. PubMed · Publisher

  Abstract

  The releasable asbestos field sampler (RAFS) was developed as an alternative to activity-based sampling (ABS; personal breathing zone sampling during a simulated activity). The RAFS utilizes a raking motion to provide the energy that releases particulate material from the soil and aerosolizes the asbestos fibers. A gentle airflow laterally transports the generated aerosol inside of a tunnel to one end where filter sampling cassettes or real-time instruments are used to measure asbestos and particulate release. The RAFS was tested in a series of laboratory experiments to validate its performance and then was deployed for field trials in asbestos-contaminated soil at multiple geographical locations. Laboratory data showed the RAFS generated repeatable and representative aerosol particulate concentrations. Field tests showed the RAFS aerosolized asbestos concentrations were statistically correlated with total particle concentrations. Field tests also showed the RAFS aerosolized asbestos concentrations were statistically correlated with asbestos concentrations measured by multiple ABS tests with different activities, different soil/environmental conditions, and at different geographical locations. RAFS provides a direct measurement of asbestos emission from soil in situ without consideration of meteorology and personal activity on the asbestos transport to the breathing zone.

2000s

• Demolition of high-rise public housing increases particulate matter air pollution in communities of high-risk asthmatics. S. Dorevitch, H. Demirtas, V.W. Perksy, et al. 2006;56(7):1022-32. PubMed · Publisher

  Abstract

  Public housing developments across the United States are being demolished, potentially increasing local concentrations of particulate matter (PM) in communities with high burdens of severe asthma. Little is known about the impact of demolition on local air quality. At three public housing developments in Chicago, IL, PM with an aerodynamic diameter < 10 microm (PM10) and < 2.5 microm were measured before and during high-rise demolition. Additionally, size-selective sampling and real-time monitoring were concurrently performed upwind and downwind of one demolition site. The concentration of particulates attributable to demolition was estimated after accounting for background urban air pollution. Particle microscopy was performed on a small number of samples. Substantial increases of PM10 occurred during demolition, with the magnitude of that increase varying based on sampler distance, wind direction, and averaging time. During structural demolition, local concentrations of PM10 42 m downwind of a demolition site increased 4- to 9-fold above upwind concentrations (6-hr averaging time). After adjusting for background PM10, the presence of dusty conditions was associated with a 74% increase in PM10 100 m downwind of demolition sites (24-hr averaging times). During structural demolition, short-term peaks in real-time PM10 (30-sec averaging time) occasionally exceeded 500 microg/m(3). The median particle size downwind of a demolition site (17.3 microm) was significantly larger than background (3 microm). Specific activities are associated with realtime particulate measures. Microscopy did not identify asbestos or high concentrations of mold spores. In conclusion, individuals living near sites of public housing demolition are at risk for exposure to high particulate concentrations. This increase is characterized by relatively large particles and high short-term peaks in PM concentration.

• The implosion of the Calgary General Hospital: ambient air quality issues. D. Stefani, D. Wardman, T. Lambert. 2005;55(1):52-9. PubMed · Publisher

  Abstract

  This paper discusses the implosion of a large inner-city hospital in Calgary, Alberta, Canada, on October 4, 1998. Stationary and mobile air monitoring conducted after the implosion indicated there were several short-term air quality issues, including significant temporal increases in total suspended particles, particulate matter (PM) with aerodynamic diameter less than or equal to 10 microm (PM10), PM with aerodynamic diameter less than or equal to 2.5 microm (PM2.5), asbestos, and airborne and settled lead. In addition, the implosion created a dust cloud that traveled much further than expected, out to 20 km. The ability of an implosion to effectively aerosolize building materials requires the removal of all friable and nonfriable forms of asbestos and all Pb-containing painted surfaces during pre-implosion preparatory work. Public advisories to mitigate personal exposure and indoor migration of the implosion dust cloud constituents should extend to 10 or 20 km around an implosion site. These findings point to a number of complex and problematic issues regarding implosions and safeguarding human health and suggest that implosions in metropolitan areas should be prohibited. Further work to characterize the public health risks of conventional versus implosion demolition is recommended.

• Evaluation of vacuum and wet-wipe methods for removal of World Trade Center dust from indoor environments. K.M. Tang, C.G. Nace, M.A. Maddaloni, et al. 2004;54(10):1293-8. PubMed · Publisher

  Abstract

  The destruction of the buildings at the World Trade Center (WTC) complex dispersed dust and debris into the surrounding area. Pulverized building material made up most of the fallout and was intermixed with combustion byproducts of the aircraft and building contents. A study was conducted to confirm the effectiveness of several cleaning procedures in removing WTC-related contamination from lower Manhattan residences. The contaminants included asbestos, lead, dioxin/furans, synthetic vitreous fibers (fibrous glass), and crystalline silica. All cleaning procedures included the common elements of vacuuming and wet wiping with soap and water. This cleaning procedure combination is effective in reducing WTC-related contamination to below health-based benchmarks. Post-cleaning environmental test results suggested that airborne asbestos measurements can be used as a surrogate parameter in clearance determinations.

• An air quality data analysis system for interrelating effects, standards, and needed source reductions: Part 13--Applying the EPA Proposed Guidelines for Carcinogen Risk Assessment to a set of asbestos lung cancer mortality data. R.I. Larsen. 2003;53(11):1326-39. PubMed · Publisher

  Abstract

  The Clean Air Act Amendments of 1990 (CAAA-90) list 189 hazardous air pollutants (HAPs) for which "safe" ambient concentrations are to be determined. The primary purpose of this paper is to develop two mathematical models, lognormal and logarithmic, that effectively express excess lung cancer mortality as a function of asbestos concentration for an example set of data and also to suggest using these two models for additional HAPs. The secondary purpose of this paper is to calculate a "safe" asbestos concentration by first assuming a default linear extrapolation (to one excess death per million people, as specified for carcinogenic HAPs). The resulting "safe" concentration is an impossible-to-achieve 1/1000 of present background asbestos concentrations. A letter to the editor and a response in this Journal issue use additional asbestos data that suggest that the "safe" concentration should be about 730 times higher than first calculated here and that a default nonlinear extrapolation should be used instead, with the "safe" concentration proportional to the desired mortality level raised to the 0.39 power. These results suggest that the most important problem in setting a "safe" concentration for each carcinogenic HAP is to determine the correct nonlinear extrapolation to use for each HAP.

• A probability model for evaluating building contamination from an environmental event. R.C. Spicer, H.J. Gangloff. 2000;50(9):1637-46. PubMed · Publisher

  Abstract

  Asbestos dust and bioaerosol sampling data from suspected contaminated zones in buildings allowed development of an environmental data evaluation protocol based on the differences in frequency of detection of a target contaminant between zones of comparison. Under the assumption that the two test zones of comparison are similar, application of population proportion probability calculates the significance of observed differences in contaminant levels. This was used to determine whether levels of asbestos dust contamination detected after a fire were likely the result of smoke-borne contamination, or were caused by pre-existing/background conditions. Bioaerosol sampling from several sites was also used to develop the population proportion probability protocol. In this case, significant differences in indoor air contamination relative to the ambient conditions were identified that were consistent with the visual observations of contamination. Implicit in this type of probability analysis is a definition of "contamination" based on significant differences in contaminant levels relative to a control zone. Detection of a suspect contaminant can be assessed as to possible sources(s) as well as the contribution made by pre-existing (i.e., background) conditions, provided the test and control zones are subjected to the same sampling and analytical methods.

Browse every journal in the library or the library by type of article, or return to medical research.