No fee unless we recover compensation for your family Text size 833-4-ASBESTOS (833-427-2378) Free Case Review

Search

22 results for “Union Carbide Corporation”, page 1 of 2

  1. Company document · Union Carbide documents · February 26, 1973

    Union Carbide Airborne Fiber Counts at Georgia Pacific Corporation, Akron, New York, with Trip Report 73-T-7 and Call Report (1973)

    Airborne Fiber Counts for Georgia Pacific Corporation, Akron, NY (Feb. 26, 1973): objectives, method, interpretation and table of fiber counts Excerpt of OSHA asbestos regulation 1910.93a (Federal Register, June 7, 1972) cited as the threshold…

  2. Company document · Union Carbide documents · August 28, 1972

    Union Carbide Report on Airborne Asbestos Dust Counts at Conwed Corporation, Cloquet, Minnesota, with Consent Letter and Handwritten Count Sheets (1972)

    …total fiber and total dust Letter of September 1, 1972 from Union Carbide Customer Service Representative to Conwed asking permission to use test data without identifying the facility, with signed acceptance by Conwed's Director of…

  3. Company document · Union Carbide documents · December 29, 1972

    Union Carbide Report on Asbestos Fiber Counts at Georgia Pacific Corporation, Chicago (1972)

    Union Carbide report on airborne asbestos fiber counts taken on November 27, 1972 at Georgia Pacific's Chicago tape joint compound plant, at the loading hopper and bagging machine. It describes the sampling method and the…

  4. Company document · Union Carbide documents · August 21, 1973

    Union Carbide Mining and Metals Division, Airborne Fiber Counts for Georgia-Pacific Corporation, Marietta, GA (1973)

    …and ends with a table of eight personal and environmental samples with fiber counts in fibers/cc. The cover lists D. Jones as present for Georgia-Pacific and J. E. Walsh as present for Union Carbide.

  5. Company document · Union Carbide documents · August 28, 1972

    Union Carbide Airborne Dust Counts for Conwed Corporation, Cloquet, Minnesota, with Sampling Data and Testing Permission Letter (1972)

    …sample descriptions, largely illegible in OCR Letter of September 1, 1972 from Union Carbide to Conwed asking permission to use test data without identifying the facility, with an accepted-and-agreed signature block Apparently blank page

  6. Company document · Union Carbide documents · February 21, 1973

    Airborne Fiber Counts for Union Carbide Corporation, Bound Brook, NJ: Calidria and Canadian Asbestos in Phenolic Molding Compound (1973)

    Report of airborne asbestos fiber sampling at the Bound Brook, NJ phenolic production area and the R&D pilot plant during the making and dumping of phenolic molding compound 5303 containing Calidria SG-100 or Canadian 7RF9 asbestos. It gives the…

  7. Company document · Union Carbide documents · August 28, 1972

    Union Carbide Report on Airborne Dust Counts at Conwed Corporation, Cloquet, Minnesota, with Transmittal Letters and Worksheets (1972)

    Cover page of report 'Airborne Dust Counts for Conwed Corporation, Cloquet, Minnesota,' August 28, 1972, listing personnel present Report text: apparatus, procedure and definitions of fiber and dust figures Summary of dust counts table, 15 samples…

  8. Company document · Union Carbide documents · December 8, 1972

    Union Carbide Report on Airborne Dust Counts at Georgia-Pacific Corporation, Marietta, Georgia (1972)

    Report dated December 8, 1972 on airborne dust sampling done October 30, 1972 at Georgia-Pacific's Marietta, Georgia tape joint compound plant. It describes the sampling method and gives fiber counts for an environmental sample and three personal…

  9. Company document · Union Carbide documents · February 26, 1973

    Airborne Fiber Counts for Georgia Pacific Corporation, Akron, New York (1973)

    Union Carbide report of airborne asbestos fiber counts taken January 18, 1973 at Georgia Pacific's joint compound plant in Akron, New York, during the unloading of a rail car of SG-210 asbestos and in…

  10. Company document · Union Carbide documents · August 21, 1973

    Union Carbide Mining and Metals Division Airborne Fiber Counts and Call Reports on Georgia-Pacific and Other Tape Joint Compound Makers (1972–1974)

    …74, on a dust count, plant conditions and an all-SG-210 mud formula Handwritten asbestos count record sheets and sample data sheets (pages 41-42 not sent) Airborne Fiber Counts for Georgia-Pacific Corporation, Marietta…

  11. Company document · Union Carbide documents · December 29, 1972

    Asbestos Fiber Counts at a Tape Joint Compound Manufacturer's Plant, Union Carbide Mining and Metals Division (1972)

    …describes the sampling method and the three reported figures, and summarizes five samples taken at the loading hopper and bagging area. E. J. Kleber and T. P. Norris of Union Carbide are listed as personnel present.

  12. Company document · Union Carbide documents · December 28, 1972

    Airborne Dust Counts for Uvalde Rock Asphalt Co., Houston, Texas, Union Carbide Mining and Metals Division (1972)

    Report of airborne asbestos fiber and dust sampling at the Uvalde Rock Asphalt Co. floor tile plant. Tests were run on November 16, 1972 at tile base blenders on Line "D" (Calidria SG-100) and Line "A" (7RC). The report describes the OSHA…

  13. Company document · Union Carbide documents · October 5, 1972

    Union Carbide Report on Airborne Dust Counts for a Tape Joint and Texture Paint Compounder (1972)

    Union Carbide report dated October 5, 1972 on airborne dust counts at a tape joint and texture paint compounder, with E. J. Kleber and T. P. Norris listed as personnel present. It describes air sampling and…

  14. Company document · Union Carbide documents · December 8, 1972

    Union Carbide Mining and Metals Division Report on Airborne Dust Counts at a Tape Joint Compound Manufacturer (1972)

    Report dated December 8, 1972 on airborne dust and asbestos fiber sampling done October 30, 1972 at an unnamed manufacturer of tape joint compounds. It describes the sampling methods, defines the fiber and dust figures, compares readings to the OSHA…

  15. Company document · Union Carbide documents · March 1, 1972

    Airborne Fiber Counts for American Biltrite Rubber Company, Trenton, New Jersey (1972)

    …of American Biltrite Rubber Company in Trenton, NJ. Samples were collected by a Union Carbide industrial hygienist and compared with the emergency OSHA standard of 5 fibers/ml; one sample, inside a railroad boxcar during manual…

  16. Company document · Union Carbide documents · July 11, 1974

    B. L. Ingalls to H. B. Rhodes Transmitting the RG-244 Quality Control Study, with Appended Commentaries (1974)

    A July 11, 1974 internal cover memo from B. L. Ingalls to H. B. Rhodes transmits his June 27, 1974 interim report on quality control of RG-244, the silica-treated Calidria asbestos product. The report covers wet-end testing at the King City plant…

  17. Company document · Union Carbide documents · October 16, 1974

    H. B. Rhodes to J. L. Myers on Dr. C. S. Thompson's Visit to Niagara Falls: Silica Criteria, Talc Exemption and Fiber Counting (1974)

    Memorandum reporting an informal October 10, 1974 visit by Dr. C. S. Thompson to the Niagara Falls laboratories. It covers the pending NIOSH silica criteria document, the status of the talc exemption from OSHA asbestos regulations, and disagreement…

  18. Company document · Union Carbide documents · May 21, 1973

    H. B. Rhodes to J. L. Myers Transmitting Comments and Questions on the EPA Asbestos Regulations, with King City Environmental Impact Analysis Forms (1973)

    A May 21, 1973 internal memo from H. B. Rhodes to J. L. Myers transmits a compilation of comments and questions, dated April 6, 1973, on the new EPA asbestos emission regulations. The memo says customers might switch to other materials if made to…

  19. Company document · Union Carbide documents · September 28, 1972

    Asbestos Fiber Counts of Airborne Samples Collected for Baker & Taylor, Canadian, Texas, Super-Visbestos Mud House Test (1972)

    Report of airborne asbestos fiber counts from tests at a Baker & Taylor drilling site near Canadian, Texas, in which 10 bags of Super-Visbestos and 10 bags of New Granular Super-Visbestos were dumped into a hopper in a mud house. It lists the…

  20. Company document · Union Carbide documents · August 15, 1974

    E. J. Kleber, Airborne Fiber Counts for Georgia Pacific Corp., Milford, VA (1974)

    Report of airborne asbestos fiber sampling by Union Carbide at a Georgia Pacific plant in Milford, VA, which makes ready-mix tape joint compounds. It describes the operations monitored, the sampling method (OSHA 1910.93a, phase…