5,238 results for “Union Carbide Corporation”, page 67 of 262
-
Company document · Union Carbide documents
South Charleston Plant Draft Provisions for Asbestos Material Removal and Disposal (undated, after June 1986)
A draft plant procedure for removing and disposing of asbestos insulation and other asbestos-containing material at the South Charleston Plant. It sets out definitions, responsibilities, job sequence, protective clothing, respirators, disposal bags,…
-
Company document · Union Carbide documents · April 3, 1981
Gordon L. Dickson to AVCO Specialty Materials Division certifying Calidria RG-244 shipment (1981)
Letter dated April 3, 1981 certifying to AVCO's Specialty Materials Division that a shipment of 5,200 lbs. of Calidria asbestos RG-244 conformed to the typical physical properties for the product at the time of manufacture. It lists AVCO purchase…
-
Company document · Union Carbide documents · June 12, 1973
W. C. Thurber to V. D. Holt on Implementation of Tuck-In Sleeve Packaging for Asbestos Bags (1973)
Internal memo from W. C. Thurber to V. D. Holt, with copies to F. H. Larrison, O. J. Malacarne and J. L. Myers, on the bags used for asbestos. It says material dribbled from the fill hole and caused dust and clean-up problems at customers' plants,…
-
Company document · Union Carbide documents · October 3, 1980
B. L. Ingalls to W. B. DeAtley and J. J. Sibley on Air Monitoring After Clean-Up of Residential Sites in Greenfield, Lockwood and King City, with Myers to Adams on Monitoring Costs (1980)
A four-page exhibit. Pages 1-3 are an October 3, 1980 internal memo from B. L. Ingalls with an attached excerpt of a revised post-clean-up air monitoring program for residential sites in Greenfield, Lockwood and King City, California. The memo…
-
Company document · Union Carbide documents · June 3, 1985
H. C. Lewinsohn, Corporate Medical Department Background Information Document: The Medical Surveillance of Persons Exposed to Asbestos (1985)
A Union Carbide Corporate Medical Department background paper by H. C. Lewinsohn, M.D. on medical surveillance of asbestos-exposed workers. It covers asbestos-related diseases, pre-placement evaluation and contraindications, OSHA's annual examination requirement…
-
Company document · Union Carbide documents · December 10, 1974
R. E. Byrne, Jr. to Calidria Sales and Marketing Staff Transmitting Rubber Research Elastomerics Paper on RG-144 in Butyl Rubber Caulk (1974)
…Jr. to eight colleagues attaching a paper on using RG-144 asbestos in butyl rubber caulk, prepared for Union Carbide by Fred Stark of Rubber Research Elastomerics, Inc. The paper gives a history of butyl caulk…
-
Company document · Union Carbide documents · March 24, 1983
H. B. Rhodes to R. W. Rebholz on the Asbestos Product Label (1983)
Internal Union Carbide memo in which H. B. Rhodes of Occupational Health commented on a proposed asbestos product label sent by Rebholz on March 9. He asked whether "workplace" and "clothing" in the label's item…
-
Company document · Union Carbide documents · July 17, 1985
Kirk E. Martin to S. J. Footer and D. R. Reem on Texas City Plant Asbestos Concerns (1985)
Internal Union Carbide memo from the Industrial Hygiene department at Texas City, reporting that asbestos-containing insulation and other materials at the Texas City Plant had become a health and public relations concern. It describes six…
-
Company document · Union Carbide documents · February 25, 1971
P. L. Reiber to R. L. Folkman on Asbestos Export Sales in Europe (1971)
Internal memo reporting on the writer's recent trip to Europe, where he met Heinz Trautmann and staff of U. C. Europe S.A. in Geneva to discuss asbestos sales and reseller activity. It describes three product groupings (standard grade for floor…
-
Company document · Union Carbide documents · April 1, 1976
J. E. Walsh Customer Call Report on Island Plastics, Waco, Texas, Regarding RG-600 Asbestos Dispersion Trials (1976)
…Island had been unable to disperse the 600 and that a compounded run by Schulman did not fill the molds. Union Carbide planned to send compounded samples for testing once material arrived from Adell in Baltimore.
-
Company document · Union Carbide documents · November 27, 1973
R. E. Byrne, Jr. Informal Report on TiO2 Contamination of RG-244 During the T-135 Plant Run (1973)
Informal report describing TiO2 contamination found in RG-244 asbestos produced during the August 15-22, 1973 T-135 plant run at King City. It reports TiO2 levels up to almost 3%, no correlation between TiO2 content and thickening efficiency, sales…
-
Company document · Union Carbide documents · March 10, 1972
James W. Rawlings to R. C. Sulick, Reichhold Chemical Industries, on Asbestos Regulations and RG-244 Customer Compliance (1972)
Letter from a Union Carbide Mining and Metals Division vice-president to the technical director of Reichhold Chemical Industries, a customer for RG-244 asbestos. It addresses federal asbestos regulations and the OSHA exposure limits and…
-
Company document · Union Carbide documents · July 31, 1973
J. E. Walsh Report of Call on Georgia-Pacific, Marietta, Georgia, on Dust Counts in Tape Joint Compound Mixing (1973)
Report of a call by J. E. Walsh at Georgia-Pacific's Marietta, Georgia, tape joint compound plant, where he ran dust counts at the plant's request. It lists the sample numbers, sampling times and locations (plant foreman, redi-mix and dry-mix…
-
Company document · Union Carbide documents · October 29, 1979
L. W. Phair to Maintenance Supervision on Removal of Insulation, with Attached South Charleston Asbestos Removal and Disposal Safety Procedure (1979)
A 1979 internal letter from L. W. Phair to South Charleston plant maintenance supervisors says the new asbestos handling procedure applies to all crafts. It tells supervisors to arrange training and equipment for employees who do incidental…
-
Company document · Union Carbide documents · June 2, 1987
G. B. Elder to MOC Transmitting L. E. Calvert's Safety Alert on Enclosures Built for Work on Asbestos-Containing Materials (1987)
A June 2, 1987 memorandum from G. B. Elder forwarding a Safety Alert from Larry Calvert about possible personnel exposure to inadequate atmospheres in enclosures built for work on asbestos-containing materials. The attached May 27, 1987 alert from…
-
Company document · Union Carbide documents · October 17, 1980
John L. Myers to K. N. Campbell (Montello, Inc.) on a Competitor's Prilled, Wetted JM Product Priced at $147/Ton (1980)
Letter from Union Carbide's Marketing Manager to K. N. Campbell of Montello, Inc. reporting a visit, the day after a meeting in St. Louis, to a maker of driveway sealers, tennis court coatings and asphaltic…
-
Company document · Union Carbide documents · July 31, 1973
John L. Myers to F. H. Larrison on Plant Assistance and Visits by G. L. Dickson and J. E. Walsh at King City (1973)
Internal correspondence from the Calidria Asbestos marketing department to F. H. Larrison at King City. It said G. L. Dickson would spend up to a month at King City working on the RG-244 circuit to increase output, that sales efforts were being…
-
Company document · Union Carbide documents · June 26, 1972
B. L. Murray to E. O. Harrah on Asbestos Dust Concentrations in Insulation Work, South Charleston Plant (1972)
Internal letter reporting results of personal air monitoring of insulators in the South Charleston Plant maintenance department (Project D-1-72). It states the 8-hour time-weighted average asbestos fiber concentrations were below the permissible…
-
Company document · Union Carbide documents
Purchase Requisition Cards for Baldwin Hill 'Superpowerhouse' Mineral Wool Insulating Cement (Armstrong-Arma Temp. Cement #10) (1964-1966)
Four pages of purchase requisition and stock-record cards for material 36225-071-PC, Baldwin Hill 'Superpowerhouse' mineral wool hydraulic setting insulating cement (Armstrong-Arma Temp. Cement #10, 1700° limitation, 50#/bag). The cards list…
-
Company document · Union Carbide documents · January 9, 1987
J. B. Leverton to Eli Bell, Texas Air Control Board, on Asbestos Insulation Removal at Texas City Marine Terminal (1987)
Letter notifying the Texas Air Control Board, under 40 CFR 61.146, of planned renovation to remove insulation from steam service headers at the Texas City marine terminal. It gives the amount (about 584 feet), the scheduled dates (January 22 to…