No fee unless we recover compensation for your family Text size 833-4-ASBESTOS (833-427-2378) Free Case Review

Search

2,273 results for “Union Carbide Corporation”, page 73 of 114

  1. Company document · Union Carbide documents · August 2, 1973

    Edward J. Kleber to Doug Jones (Georgia-Pacific) Enclosing Procedure and Equipment List for Airborne Asbestos Fiber Counts (1973)

    Letter from a Union Carbide customer service representative to a Georgia-Pacific contact, sent at the request of J. E. Walsh. It enclosed a procedure for obtaining airborne asbestos fiber counts and a list of the…

  2. Company document · Union Carbide documents · December 14, 1971

    B. L. Ingalls to Grey F. Rolland (Insul-Coustic) on Calidria Asbestos and the Asbestos Information Association Address (1971)

    Letter from Union Carbide's Eastern Region sales manager to the research director of Insul-Coustic, following up on a conversation the week before. It gives the address of the Asbestos Information Association and describes Calidria…

  3. Company document · Union Carbide documents · May 27, 1977

    John L. Myers to E. L. Aasen (Georgia-Pacific) on the CPSC Proposed Ban on Consumer Asbestos Patching Compounds (1977)

    Letter from Union Carbide's marketing manager to a Georgia-Pacific contact about the Consumer Product Safety Commission's proposed ban on consumer use of asbestos-containing taping, spackling and joint-sealing compounds. It describes the…

  4. Company document · Union Carbide documents · December 19, 1979

    G. F. Hurley to C. W. Carman and Others on an Informational Slide Program on Asbestos (1979)

    Internal Union Carbide memo from the Technical Center industrial hygienist announcing a 20-minute slide presentation with taped commentary on asbestos toxicity and safe handling. It says the Industrial Hygiene group revised a Johns-Manville presentation…

  5. Company document · Union Carbide documents · November 14, 1972

    John L. Myers to C. W. Nixon (Kentile Floors) on Asbestos Fiber Counts of Customer Samples (1972)

    Letter from the Marketing Manager of Union Carbide's Calidria Asbestos unit to a Kentile Floors contact reporting fiber counts for ten air samples the customer had sent in, with comments on filter appearance. It asks…

  6. Company document · Union Carbide documents · November 10, 1977

    Sales Call Report on Eimco Customer Contact (George Toelcke) about Increased Compounding Cost for RG600 (1977)

    A handwritten Metals Division customer call report, dated 11/10/77, with Asbestos marked as the product discussed. It concerns the customer's higher cost of compounding RG600 and compares the prior compounder's price with new quotes from Adell…

  7. Company document · Union Carbide documents · August 28, 1975

    Report of Call on Mobay Chemical Corp. about RG-600 Evaluation for Polycarbonate Reinforcement (1975)

    Report of a call on Mobay Chemical Corp., Pittsburgh, dated August 28, 1975, to determine the status of Mobay's evaluation of RG-600 for polycarbonate reinforcement. It records that the contact, C.L. Gable, had been reassigned and that further…

  8. Company document · Union Carbide documents · June 14, 1973

    B. L. Ingalls Telecon Report on Glidden-Durkee's Move to Eliminate Asbestos (1973)

    Telephone call report by B. L. Ingalls on a call to Dick Haviland, Assistant Director of Manufacturing at Glidden-Durkee (Cleveland, Ohio), following an earlier meeting about health and regulatory issues with asbestos. The report says Glidden-Durkee…

  9. Company document · Union Carbide documents · October 5, 1973

    R. E. Byrne, Jr. to W. C. Thurber on RG-244 Sales Growth and the Thixotrope Market (1973)

    Internal memo from R. E. Byrne, Jr. to W. C. Thurber transmitting tables and a graph on RG-244 (Calidria) sales growth, the estimated total thixotrope market, and RG-244 sales by application. It projects RG-244 sales rising from 950 tons in 1973 to…

  10. Company document · Union Carbide documents · September 25, 1972

    J. E. Walsh Report of Call on Whitaker Corp. (Lenoir, N.C.) Regarding RG-244 Resin Screen Plugging and Toxicology Brochure (1972)

    Report of a call by J. E. Walsh on Whitaker Corp., a polyester resin maker in Lenoir, North Carolina, interviewing its technical director and technical service contact. It covers Sonic study data, Whitaker's screen-plugging problems with RG-244…

  11. Company document · Union Carbide documents · March 8, 1979

    R. L. Foster to F. D. Bess and Others Transmitting Ed Light's Toxic Water Pollution Comments, with Attached Report (1979)

    Union Carbide internal memo from R. L. Foster, March 8, 1979, transmitting Ed Light's comments on toxic water pollution control Ed Light, 'Toward a New Toxic Water Pollution Control Policy: Documentation for Additional Standards' (Jan…

  12. Company document · Union Carbide documents · September 24, 1976

    H. B. Rhodes to R. F. X. Fusaro, B. L. Ingalls and W. C. Thurber Transmitting Draft Laboratory Safety Manual on Asbestos (1976)

    A one-paragraph internal memo from H. B. Rhodes sends a draft laboratory safety manual on asbestos to three recipients for review and comment, saying it was prepared at the request of the Chemical Safety Committee. Attached is a draft, dated…

  13. Company document · Union Carbide documents · April 30, 1971

    J. W. Rawlings to L. P. Twichell on Enlarging the King City 244 Unit to 1500 Tons per Year (1971)

    A one-page internal letter dated April 30, 1971, in which J. W. Rawlings told "Lou" that annual RG244 sales of 1500 tons now appeared possible. He asked for a preliminary estimate of the capital cost of enlarging the King City 244 unit to 1500 tons…

  14. Company document · Union Carbide documents · June 2, 1977

    J. P. Gregory to J. W. Biddle and Others on Asbestos Insulation Stripping and Air Sampling at the Institute Plant (1977)

    Internal memo reporting air sampling during the stripping of asbestos insulation from the dust collector on #2 boiler at the Institute Plant on 5/26/77. It lists area and personal sample results and concludes that one sample slightly exceeded the…

  15. Company document · Union Carbide documents · August 25, 1978

    E. R. Levy to C. W. Carman and Others on the Orientation Meeting for Personnel Safety and Health Training Package Preparers (1978)

    Memorandum summarizing an August 24, 1978 orientation meeting for preparers of Personnel Safety and Health training packages. It records assignments of packages to preparers, a November 30, 1978 target completion date, and a follow-up meeting set…

  16. Company document · Union Carbide documents · October 5, 1979

    W. B. Troutman to Mailing List A-8 on Asbestos Handling at the South Charleston Plant, with Attached Handling Procedure (1979)

    Internal correspondence from the South Charleston Plant Safety Director transmitting a procedure for handling asbestos-containing insulation. The memo states that asbestos has been recognized as a serious health hazard and that the attached…

  17. Company document · Union Carbide documents · January 13, 1976

    Customer Call Report on Georgia Pacific, Albany, Oregon: Asbestos (RG 244) in Phenolic Adhesives and the Toxicology Problem (1976)

    Call report dated 1-13-76 on a visit to Georgia Pacific Corp. in Albany, Oregon (phenolic adhesives), where Joe Dede, Quality Control Manager, was interviewed. The report states the objective was to overcome the toxicology problem on using RG 244…

  18. Company document · Union Carbide documents · November 22, 1977

    G. L. Dickson Customer Call Report on Kentile Floors, Brooklyn, Discussing SG-103-57 Bags of Calidria (1977)

    Customer call report on a 11/22/77 visit to Kentile Floors, Inc. (Brooklyn, NY, vinyl and asphaltic floor tile) about Calidria SG-100 in 50 lb. bags (SG-103-57). It records Kentile's first carload order, the $106/ton price, the customer's reasons…

  19. Company document · Union Carbide documents · March 31, 1971

    Rawlings to G. Frankenbusch (Frankfurt) Telex on Delay in Written Proposal for New Agreement (1971)

    A telex sent from Rawlings of the Mining and Metals Division in New York to G. Frankenbusch in Frankfurt, Germany. It said the definite written proposal for a new agreement was delayed because working out escalation and other provisions took longer…

  20. Company document · Union Carbide documents · August 8, 1977

    R. E. Byrne, Jr. to Wikel Mfg. Company on California's Occupational Cancer Control Act Asbestos Reporting Requirements (1977)

    …8, 1977, on California asbestos reporting requirements Enclosure: Union Carbide-typed copy of California General Industry Safety Orders Section 5208 (asbestos), marked accurate but not official, including new reporting subsection (l) Blank or no legible content…