No fee unless we recover compensation for your family Text size 833-4-ASBESTOS (833-427-2378) Free Case Review

Search

1,791 results for “Union Carbide Corporation”, page 10 of 90

  1. Company document · Union Carbide documents · February 22, 1985

    R. A. Bleidt to Marty Sue Suggesting a Marketable Service Based on an Abstract on TEM Accuracy in Asbestos Analysis (1985)

    A short note dated 2/22/85 from RABleidt to Marty Sue, stamped received March 4, 1985, proposing 'another idea for a service that could be marketed.' It attaches a journal abstract (Steel and Small, Anal. Chem. 1985) on errors in transmission…

  2. Company document · Union Carbide documents · September 12, 1986

    C. P. Maxwell to Browning, Collins, Graham, Keller, Mills, Noble and Rucker Transmitting M. A. Patel's OSHA Amended Asbestos Standard Training Slides (1986)

    A handwritten cover note dated September 12, 1986 from C. P. Maxwell forwards copies of overhead slides that Manhar Patel prepared and used in a training session for Services and Construction Department supervisors on the OSHA amended asbestos…

  3. Company document · Union Carbide documents · April 1, 1987

    R. E. Coyne Handwritten Note on Asbestos Removal from a Dowtherm Line in a Pipe Rack at Building 9 (1987)

    One-page handwritten note dated 4-1-87 on a Dowtherm line with asbestos material in a pipe rack on the south side of Building 9. It states that an enclosure was not feasible because pipe was in the way and a good seal could not be made, and it lists…

  4. Company document · Union Carbide documents · June 20, 1983

    H. G. Kuntz and K. E. Williams, Industrial Hygiene Results on Insulator Exposure During Asbestos Insulation Removal, with Spectroscopy Lab Sheet and Data Table (1983)

    Page 1 is an industrial hygiene report dated June 20, 1983 on airborne asbestos measured while insulators removed asbestos-containing insulation in several plant areas, with results compared to the permissible ceiling and 8-hour TWA. Page 2 is a…

  5. Company document · Union Carbide documents · 1987

    John Kyle's Handwritten Note on Friable Asbestos in the Asbestos Insulation Small Scale Production Area (1987)

    A two-page handwritten note dated 1-6-87 with the subject 'Asbestos Insulation Small Scale Production Area.' The writer reported finding a lot of friable asbestos on a visual inspection of the small scale unit and said asbestos had been knocked off…

  6. Company document · Union Carbide documents · January 14, 1985

    Handwritten Note to Gary Merz on NESHAP Asbestos Notification Letter (1985)

    A one-page handwritten routing note filed under 'R-pro file - NESHAP's (asbestos)'. The writer asks Gary Merz to review the attachment, asks whether he has submitted a letter for 1985, refers him to Attachment C as an example, and asks for a copy of…

  7. Company document · Union Carbide documents · January 12, 1982

    Handwritten Asbestos Fiber-Count Calculations for Construction at Institute (1982)

    One page of handwritten calculations, headed "Asbestos - Calculations" and dated January 12, 1982, that convert fiber counts per 100 microscope fields into fibers per cubic centimeter. The samples are labeled 5II-HHF-1, 5II-HHF-2, 6A, 7A, 8A and 9A…

  8. Company document · Union Carbide documents · November 20, 1985

    Handwritten Fiber Count Concentration Formula and Sample Tally (1985)

    One handwritten page with a formula for calculating fiber concentration from average fiber count, blank average fiber count, filter area, field area (.0064) and sample volume. Below it is a tally of fiber counts and a second column of numbers for…

  9. Company document · Union Carbide documents · March 10, 1986

    Handwritten Fiber Count Notes, Tigmor and Blank Samples (1986)

    A one-page handwritten note, signed or initialed and dated 3-10-86, listing fiber counts for two samples. One sample, labeled with a date of 3-5-86, shows 21 fibers and the other, a blank, shows 1 fiber. Each has the number 100 in the last column.

  10. Company document · Union Carbide documents · December 6, 1983

    G. C. Merz to EPA Enforcement Division (Philadelphia) Transmitting Notice of Intent to Demolish or Renovate Facilities with Friable Asbestos Insulation (1983)

    Letter from Union Carbide's Maintenance and Energy Systems department to the EPA enforcement office in Philadelphia, sending a notification under 40 CFR 61.22(d) about demolition or renovation of facilities containing friable asbestos insulation…

  11. Company document · Union Carbide documents · August 8, 1986

    L. E. Calvert Transmitting Draft Recommended Policy on Use of Asbestos in the Workplace, with C. C. Neely Memo and C&P Draft Policy (1986)

    Cover letter from Larry E. Calvert (Houston) sending a draft asbestos policy to a distribution list, noting that the permissible exposure level fell from 2.0 to 0.2 fibers/cc (8-hour TWA) on July 21, 1986. Attached are a distribution list, an August…

  12. Company document · Union Carbide documents · August 1980

    Industrial Hygiene Monitoring Reports for Asbestos During Insulation Stripping in Bldg. 777, to R. F. Painter (1980)

    Five 'Industrial Hygiene Monitoring for Asbestos' report forms covering workers wetting, bagging and stripping insulation in Bldg. 777. On 8/18/80 and 8/19/80, R. E. Templeton's samples gave time-weighted averages of 2.8 and 2.5 fibers >5 µm/cm3,…

  13. Company document · Union Carbide documents · April 20, 1982

    Handwritten Memo Notes on Medical Examinations for Employees Exposed to Asbestos (1982)

    Two pages of handwritten notes, the first on a Union Carbide memo form dated April 20, 1982. They record a question about physicals for employees and a quoted statement that physicals will not be given to…

  14. Company document · Union Carbide documents · February 15, 1980

    J. L. Myers, Asbestos Industry Quarterly Report for the Fourth Quarter of 1979 (1980)

    Quarterly report by J. L. Myers comparing 1979 asbestos sales, domestic and export, to budget and Forecast IV, with breakdowns by region and country. It also comments on declining RG-244 and drilling mud sales, the CAL-OSHA Standards Board action…

  15. Company document · Union Carbide documents · October 6, 1980

    R. E. Byrne Jr. to Calidria Distributors Urging Customer Notification of Asbestos Hazards (1980)

    …1980, in which Union Carbide's Manager-Asbestos Technology encouraged a distributor to notify its customers of possible hazards associated with the use and handling of asbestos. The letter refers to an earlier letter and enclosures…

  16. Company document · Union Carbide documents · November 2, 1983

    J. L. Myers Draft of UCC Response to OSHA's Emergency Temporary Standard Reducing the Asbestos PEL from 2.0 to 0.5 F/CC (1983)

    A one-page draft statement of Union Carbide Corporation's response to OSHA's emergency temporary standard lowering the permissible asbestos exposure level from 2.0 to 0.5 f/cc. It said UCC expected no…

  17. Company document · Union Carbide documents · March 4, 1987

    Electronic Mail from WPF1 to JGV1 Answering Questions on Asbestos Insulation in 2-4-8L (1987)

    Internal e-mail replying to a memo titled "Asbestos Insulation in 2-4-8L," answering seven numbered questions. It addresses who disposes of asbestos-containing bags after work, whether a worker's respirator met OSHA Standard 1910.1001, a worker's…

  18. Company document · Union Carbide documents · April 28, 1980

    Industrial Hygiene Monitoring for Asbestos at #1 Powerhouse, Institute: Insulation Stripping and Bagging Results for Jividen, Cobb and Grant (1980)

    Three industrial hygiene monitoring forms dated 4/28/80 report airborne asbestos fiber sampling at the #1 Powerhouse at Institute while insulation was stripped from steam lines on the #1 boiler and bagged for disposal. Sample results are given for…

  19. Company document · Union Carbide documents · August 1980

    Industrial Hygiene Monitoring for Asbestos: D. C. Shamblin Stripping Insulation, Bldg. 777, Reports to R. F. Painter (August 1980)

    Two Industrial Hygiene Monitoring for Asbestos forms covering personal air sampling of D. C. Shamblin while stripping insulation in Bldg. 777, Room 111, on 8/18/80 and 8/19/80. The forms list fiber concentrations, time-weighted averages compared…

  20. Company document · Union Carbide documents · September 9, 1983

    V. D. Dutcher to Distribution List on Updated Exposure Standards and Guidelines for Latex Chemicals, Including Asbestos (1983)

    Internal Union Carbide memo marked 'Business Confidential' that transmitted updated lists of Latex chemicals with personnel exposure standards set by UCC, UCC Divisions or OSHA, and exposure guidelines recommended by the ACGIH. The attached tables list…