- Organization: Union Carbide Corporation, Chemicals and Plastics, Research and Development Department
- Clear filters
9 results for “Union Carbide Corporation”
-
Company document · Union Carbide documents · June 23, 1969
Calidria Asbestos R-G244 as a Thixotrope for Polyester Resins, Union Carbide Research and Development Department (1969)
A technical report from Union Carbide's Chemicals and Plastics Research and Development Department, Niagara Falls, on using Calidria R-G244 asbestos as a thixotrope (thickener) in polyester resins. The surviving pages contain a table of…
-
Company document · Union Carbide documents · September 6, 1967
L. R. Comstock Project Report on Effect of UCC Asbestos R-G244 in Thixotropic Polyesters (1967)
…L. Smith) comparing Union Carbide's silica-treated asbestos R-G244 with CAB-O-SIL M-5 as a thixotropic filler in a general purpose polyester. It reports that R-G244 gave about four times the…
-
Company document · Union Carbide documents · December 3, 1969
J. E. Skvarla to R. E. Byrne and Others Transmitting Technical Service Report on Repulping Calidria Asbestos Pellets for Nalco Chemical Company (1969)
A December 1969 internal Union Carbide cover memo from J. E. Skvarla forwards a November 21, 1969 Technical Service Report prepared for Nalco Chemical Company on aqueous repulping of Calidria pelletized asbestos. The report describes continuous…
-
Company document · Union Carbide documents · November 21, 1969
G. L. Dickson to B. K. Barton Transmitting Technical Service Report on American Can Company Paper Toweling Trial with High Purity Asbestos (1969)
A cover memo from G. L. Dickson to B. K. Barton transmits a Technical Service Report (dated November 17, 1969) on a November 6, 1969 machine trial at American Can Company's Green Bay, Wisconsin mill. The trial tested High Purity Asbestos as a…
-
Company document · Union Carbide documents · December 29, 1967
K. Park, Interaction of Water-Soluble Polymers with Chrysotile Asbestos, Rheological Studies (1967)
Research report by K. Park on laboratory studies of how water-soluble anionic, non-ionic and cationic polymers interact with chrysotile asbestos in water, using viscometry and electrophoresis. It reports dispersion, flocculation and surface-charge…
-
Company document · Union Carbide documents · July 8, 1968
R. G. Woolery to R. E. Byrne and Others on the Annual ASTM D-30 Sub III Meeting in San Francisco, with Draft Asbestos Definitions (1968)
Internal correspondence reporting on the June 24-28, 1968 ASTM D-30 meeting in San Francisco, including the Sub III (Asbestos and Other Natural Occurring Fibers) committee's work on test methods and definitions. Attached are a sixth draft of…
-
Company document · Union Carbide documents · March 14, 1969
R. E. Byrne, Jr. to J. L. Myers on R-G244 Quality Control (1969)
Internal correspondence from the Niagara Falls Research and Development Department to the King City plant about quality control of R-G244. It follows a telephone conversation and customer comments on product variability. The memo recommends a lower…
-
Company document · Union Carbide documents · May 2, 1977
W. D. Massey to C. H. Carder on Experimental Lower Cost Latex Replacements for UCAR Latex 131 in Tape Joint Cements (1977)
Business confidential R&D memorandum evaluating three experimental polyvinyl acetate latices against UCAR Latex 131 in asbestos-free tape joint cement formulations. It reports comparable or better performance, a possible raw material saving of 2.5¢…
-
Company document · Union Carbide documents · October 4, 1974
T. D. Foster, Jr. Informal Report on Phenolic Resin Coated Asbestos for Oil Base Muds (1974)
Informal report, Project 132C40, on tests of phenolic resin coated asbestos samples (RG-144-10 and RG-144-20) as thickeners for oil base drilling muds, compared against Bentone 34. It reports rheology and heat aging results and concludes the…