33 results for “Union Carbide Corporation”, page 1 of 2
-
Company document · Union Carbide documents · September 12, 1986
C. P. Maxwell to Browning, Collins, Graham, Keller, Mills, Noble and Rucker Transmitting M. A. Patel's OSHA Amended Asbestos Standard Training Slides (1986)
A handwritten cover note dated September 12, 1986 from C. P. Maxwell forwards copies of overhead slides that Manhar Patel prepared and used in a training session for Services and Construction Department supervisors on the OSHA amended asbestos…
-
Company document · Union Carbide documents · November 22, 1985
G. W. Phares to B. H. Avashia, M.D., and Others on Asbestos Monitoring at South Charleston Plant (1985)
Internal Union Carbide memo reporting asbestos exposure monitoring done on November 18, 1985 while construction employees stripped and bagged insulation from a tank at the South Charleston polyols unit. It states that all samples were below…
-
Company document · Union Carbide documents · March 21, 1977
G. W. Bott to W. T. Shelton on Water Sprayers for Removing Asbestos Pipe Covering at the Tech Center (1977)
Internal Union Carbide correspondence from G. W. Bott to W. T. Shelton recommending the purchase of two one-gallon garden-type sprayers, similar to the Hudson Model 6215, for the Tech Center. The sprayers were to…
-
Company document · Union Carbide documents · December 12, 1984
M. F. Stowers to G. W. Phares on Asbestos Monitoring During Insulation Stripping at the Institute Plant (1984)
Internal memo reporting personal asbestos exposure monitoring on November 13, 1984 during stripping of about 100 ft of asbestos-containing steam line insulation at the Institute plant. It states that all four samples were well below the 2.0 fibers…
-
Company document · Union Carbide documents · July 16, 1982
Manhar A. Patel to J. C. Smith on Dust and MEK Monitoring in the Sandblast Shed, 511 Construction Institute Plant (1982)
Internal Union Carbide letter reporting dust sampling for 'Black Beauty' in the Sandblast Shed and methyl ethyl ketone (MEK) sampling in the Paint Preparation Shed at the 511 Construction Institute Plant, May-June 1982. It says…
-
Company document · Union Carbide documents · May 25, 1979
G. W. Bott to W. T. Shelton on Asbestos Exposure Survey of Insulators Stripping Old Insulation in Building 707 (1979)
Internal memo reporting an industrial hygiene survey, conducted May 9, 1979, of asbestos exposure of insulators stripping about ten feet of 1-inch steam condensate line insulation in Building 707 at South Charleston. It reports that the insulation…
-
Company document · Union Carbide documents · May 16, 1985
M. F. Stowers to R. S. Howell on Asbestos Monitoring During Insulation Stripping at the Institute Plant (1985)
Internal memo reporting asbestos air monitoring done on May 7, 1985 while construction employees stripped about 200 ft. of insulation from 3 inch process lines near the Pesticide B Unit at the Institute plant. It states all samples were below the…
-
Company document · Union Carbide documents · November 9, 1979
G. W. Bott to M. E. Perry on Asbestos Exposure from Sawing Transite Board on the DoAll Saw, Bldg. 704 Machine Shop (1979)
Internal industrial hygiene report on an October 30, 1979 survey of asbestos exposure while a machinist sawed transite (asbestos-containing) board on a DoAll saw in the Building 704 machine shop at South Charleston, West Virginia. It reports sample…
-
Company document · Union Carbide documents · February 13, 1979
G. W. Bott to W. T. Shelton on Asbestos Exposure Survey of Reactor Lids Covered with Asbestos Paper (1979)
Internal Union Carbide memo reporting an industrial hygiene survey, dated February 7, 1979, of asbestos exposure while an insulator covered two small reactor lids with Johns-Manville 32-pound asbestos paper. One sample for J. R…
-
Company document · Union Carbide documents · July 6, 1979
G. W. Bott to P. W. Young on Asbestos Exposure Survey of Insulators Stripping Old Insulation at Institute Plant (1979)
Internal Union Carbide memo reporting an industrial hygiene survey on July 2, 1979 of construction insulators stripping asbestos insulation from the #3 turbine and about thirty feet of four-inch pipe in Building 17 at the…
-
Company document · Union Carbide documents · October 20, 1981
M. A. Patel to W. L. Browning and J. W. Perry, Jr. on Asbestos Monitoring in the Gasket Shop, Institute Plant (1981)
Internal memo reporting area and personal asbestos exposure monitoring in the Gasket Shop (laundry, Building 3 of the Construction Department) at the Institute Plant, done by the plant's industrial hygiene group on October 2 and 9, 1981. It states…
-
Company document · Union Carbide documents · November 5, 1979
G. W. Bott to W. T. Shelton on Asbestos Exposure Survey of Insulators Stripping Old Insulation, Building 773 (1979)
Internal Union Carbide report on a November 2, 1979 survey of asbestos exposure of insulators stripping insulation from a reactor column at Building 773, South Charleston, West Virginia. It reports fiber concentrations of 0.4 and…
-
Company document · Union Carbide documents · May 10, 1979
G. W. Bott to W. T. Shelton on Asbestos Exposure of Insulators Stripping Old Insulation, Building 720 (1979)
Internal Union Carbide Chemicals and Plastics memo reporting an industrial hygiene survey of asbestos exposure on May 4, 1979, while insulators stripped old insulation from a steam line in a Building 720 service pit. It reports…
-
Company document · Union Carbide documents · April 26, 1982
Mark E. Bell to R. F. Painter: Industrial Hygiene Monitoring for Asbestos, D. C. Shamblin, Building 706 (1982)
Union Carbide 'Industrial Hygiene Monitoring for Asbestos' form, Computer Ref. W-1315, reporting air sampling of D. C. Shamblin in Building 706 on 4/21/82. It lists a personal sample of 1.2 fibers >5…
-
Company document · Union Carbide documents · November 13, 1987
M. A. Patel to P. L. Graham et al. on Respiratory Protection for Asbestos, with 1984 R. G. Hanlon Memo and DuPont Respirator Study Figures (1987)
A November 13, 1987 internal memo from Manhar A. Patel forwarded a DuPont study of respirator performance against asbestos fibers and continued to recommend 3M respirators. Attached were a November 6, 1984 Richard G. Hanlon memo on the same subject,…
-
Company document · Union Carbide documents · November 27, 1978
G. W. Bott to W. T. Shelton on Asbestos Exposure While Stripping Old Insulation from Dowtherm Lines, South Charleston (1978)
Internal industrial hygiene report on air sampling of an insulator stripping asbestos-containing insulation from Dowtherm lines in Building 707, Cell 3, begun November 16, 1978. It reports two personal samples (0.44 and 0.61 fibers/cc >5 µm) and an…
-
Company document · Union Carbide documents · February 1, 1982
M. E. Bell and G. W. Bott to W. T. Shelton: Asbestos Monitoring of Insulators Wheeler and Agosti at 704 Powerhouse (1982)
Two Union Carbide 'Industrial Hygiene Monitoring for Asbestos' forms dated Feb. 1, 1982 (Computer Ref. W-1274), reporting personal air samples taken 1/26/82 at the 704 Powerhouse while two insulators stripped insulation. The results…
-
Company document · Union Carbide documents · November 22, 1983
Manhar A. Patel to D. R. Paugh Transmitting the 1984 Industrial Hygiene Program for the 511 Construction Department (1983)
Internal Union Carbide correspondence from Manhar A. Patel transmitting a 1984 industrial hygiene program for the 511 Construction Department. The attached program lists planned exposure monitoring by shop and frequency, including dust in the insulation shop…
-
Company document · Union Carbide documents · October 23, 1981
M. A. Patel to W. L. Browning, J. W. Perry Jr. and Others on Asbestos Monitoring in the Gasket Shop, 512 Construction, Institute Plant, with Replacement Letter and Data Sheet (1981)
Internal Union Carbide correspondence from Manhar A. Patel. A cover note says an October 20, 1981 letter on asbestos monitoring in the Institute Plant gasket shop contained an error and should be replaced. The replacement letter…
-
Company document · Union Carbide documents · January 14, 1985
W. L. Browning to R. L. Noble on Asbestos Handled by Toolroom Personnel and Toolroom Waste (1985)
One-page memorandum from W. L. Browning to R. L. Noble, copied to M. L. Mills and R. C. Proffitt, about asbestos handled by toolroom personnel. It states that gaskets are cut from asbestos-containing material in the Gasket Shop and that scrap must…