14 results for “Union Carbide Corporation”
-
Company document · Union Carbide documents · February 22, 1971
Union Carbide Call Report on Chevron Asphalt (Emeryville, Calif.) Interest in Calidria Asbestos (1971)
A Union Carbide call report dated 2/22/71 on an interview with W. J. Kari, Tech. Coordinator West, of Chevron Asphalt in Emeryville, California. The stated objective was to determine the potential for Calidria asbestos…
-
Company document · Union Carbide documents · May 9, 1973
J. E. Walsh Report of Call on Florida Rolling Mills (George Harlock) re T-135 Wall and Ceiling Spray Samples and EPA Asbestos Letter (1973)
…a condominium job, the sprayers' working conditions and eye irritation, and a customer's receipt of an EPA letter about a new asbestos regulation, on which Union Carbide advised the customer it would have to reply.
-
Company document · Union Carbide documents · October 29, 1979
G. L. Vessels to J. L. Meyers Listing Asbestos Shipments to Harrisons and Crosfield, Portland, Oregon (1979)
Internal correspondence from the King City office replying to a letter of October 23, 1979. It states that no asbestos was shipped to seven named companies, and it attaches listings of asbestos products (RG-244, RG-144, HPO, RG-100, SG-210) shipped…
-
Company document · Union Carbide documents · April 10, 1974
John L. Myers to F. H. Larrison and G. L. Vessels on Reducing April Production Requirements (1974)
Telex (TWX) dated April 10, 1974 from John L. Myers in Niagara Falls to the King City, California plant, with a copy to W. C. Thurber. It lowers the April production requirements for five products (SG-104, HPP-EXP, VISBESTOS, IMCOBEST, CSV), reports…
-
Company document · Union Carbide documents · 1981
Weekly Operating Reports from the King City Plant to W. C. Thurber, Metals Division (April-June 1981)
Nine weekly operating reports on Union Carbide internal correspondence forms, sent from the King City, California plant to W. C. Thurber in New York. Each lists production by grade (High Purity, Super Standard, Standard, RG-244…
-
Company document · Union Carbide documents · June 1, 1972
R. E. Byrne, Jr. to F. H. Larrison on New Interim Plant Control Limits for RG-244, RG-244X and SX-24 (1972)
Internal correspondence from the Research and Development Department to the King City plant listing new interim plant control limits for RG-244, RG-244X and SX-24 (moisture, wet screen, pH, polyester viscosity, TiO2). The memo says the changes were…
-
Company document · Union Carbide documents · May 9, 1973
J. E. Walsh Call Reports on Florida Rolling Mills: T-135 Spray Samples, EPA Asbestos Regulation, and Strike Supply (1973-1975)
Three Union Carbide reports of calls by J. E. Walsh on customer Florida Rolling Mills, Fort Lauderdale, dated 5/9/73, 2-21-75 and 8-1-75. The 1973 report covers sampling of a T…
-
Company document · Union Carbide documents · July 5, 1979
W. B. DeAtley to O. J. Malacarne on Double Wrapping and Palletizing Calidria Products to Meet DOT Regulations (1979)
Internal correspondence from the King City office to O. J. Malacarne stating that double wrapping and palletizing of material shipped to warehouses and distributors had begun to meet new DOT regulations effective August 20, 1979. It lists the…
-
Company document · Union Carbide documents · May 9, 1973
J. E. Walsh Report of Call on Florida Rolling Mills (George Harlock) re T-135 Spray Samples and EPA Letter (1973)
Report of a call on Florida Rolling Mills, Ft. Lauderdale, a maker of muds and wall and ceiling sprays, interviewing George Harlock, Vice President, Production. Walsh described observing on-the-job spraying of T-135 products at a condominium project…
-
Company document · Union Carbide documents · October 29, 1979
G. L. Vessels to J. L. Meyers on Asbestos Shipments to Harrisons and Crosfield, Portland, Oregon (1979)
Internal correspondence replying to a letter of October 23, 1979. It states that no asbestos had been shipped to seven named companies and attaches listings of asbestos products (RG-244, RG-144, HPO, RG-100, SG-210) shipped to and for Harrisons and…
-
Company document · Union Carbide documents · January 21, 1971
H. B. Rhodes Report of Call to Kaiser Gypsum Corp. (Jacksonville, Fla.) on SG-210 for Ready-Mix Joint Compound Color (1971)
Report of a call on Mr. Bill O'Donnell, plant superintendent at Kaiser Gypsum Corp., Jacksonville, Fla., following up on his interest in using SG-210 to correct a poor color situation in ready-mix joint compound. The report states that the Delanco,…
-
Company document · Union Carbide documents · February 2, 1971
B. L. Ingalls Report of Call on Polymerics Inc. (David Lester) Concerning RG-144 and Asbestos Health Concerns (1971)
Report of a telephone call with David Lester of Polymerics Inc., Waltham, Mass., about its evaluation of RG-144 in a water-base polymer application. Lester said the company was concerned about the toxicological properties of asbestos and was…
-
Company document · Union Carbide documents · July 11, 1977
R. C. Pierrehumbert to C. H. Carder on Garland, Texas Tennis Court Coatings Projects, Nov. 1975 - June 1977 (1977)
Memo summarizing the Garland, Texas plant's tennis court coatings work from November 1975 to June 1977. It covers analysis of competitors' coatings, UCAR Latex formulations sent to sales accounts, cushion-coating failures including a Flintkote…
-
Company document · Union Carbide documents · July 11, 1977
R. C. Pierrehumbert to C. H. Carder on Garland, Texas Tennis Court Coatings Projects, Nov. 1975 - June 1977 (1977)
Memo summarizing Garland, Texas lab and sales work on tennis court coatings from November 1975 to June 1977, sent to C. H. Carder with a copy to A. A. Mees for 1978 planning. It reports analysis of competitors' tennis court coatings, including a…