27 results for “Union Carbide Corporation”, page 1 of 2
-
Company document · Union Carbide documents · January 13, 1976
Union Carbide Metals Division Customer Call Report on Georgia Pacific, Albany, Oregon, and Calidria RG 244 (1976)
Customer call report on a visit to Georgia Pacific Corp. in Albany, Oregon (phenolic adhesives). The stated objective was to overcome a 'Toxicology problem' on using RG 244. The report says the customer was interested in RG 244, had run an…
-
Company document · Union Carbide documents · November 13, 1975
E. J. Kleber Call Report on RG-600 Asbestos Seminar at General Electric, Appliance Park, Louisville (1975)
Customer call report on a seminar given to General Electric personnel at Appliance Park, Louisville, KY, on RG-600 and Calidria asbestos, with discussion of the OSHA situation. The report records that GE's medical department resisted using asbestos…
-
Company document · Union Carbide documents · April 2, 1976
J. E. Walsh Call Report on Proko, Dallas, Texas, on Asbestos Levels and Fiber Supply (1976)
Customer call report by salesman J. E. Walsh on a visit with R. E. Byrne to Proko in Dallas, Texas, a joint cement and spray customer. It records carload orders, Proko's replacement of TiO2 and cellulosic in its formulations, and its reduction of…
-
Company document · Union Carbide documents · March 26, 1976
T. P. Norris Call Reports on Chevron Asphalt and Chevron Chemical HPP Trials in Asphaltic Coatings (1975-1976)
Two Metals Division customer call reports by salesman T. P. Norris on efforts to sell HPP asbestos grade for asphaltic coatings to Chevron. The 3/26/76 report describes a production trial at Chevron Asphalt in Oakland, including mixing times against…
-
Company document · Union Carbide documents · June 9, 1976
T. P. Norris Call Report on Chevron Asphalt Company Evaluation of HPP and Competing Calaveras Asbestos (1976)
…Company) was the strong contender at $105.00/ton in Pressure Pack units, and that Union Carbide would continue to pursue the business. A handwritten note dated 7/9 refers to a 400 lb HPO evaluation…
-
Company document · Union Carbide documents · November 13, 1975
E. J. Kleber Customer Call Report on RG-600 Seminar at General Electric Appliance Park, Louisville (1975)
Customer call report on a seminar about RG-600 given to General Electric personnel at Appliance Park, Louisville, KY. It records that the OSHA situation and the Calidria asbestos story were presented, that G.E. could use about 1,000,000 lbs. of…
-
Company document · Union Carbide documents · January 13, 1976
Customer Call Report on Georgia Pacific Corp., Albany, Oregon: Proposed Use of RG 244 Asbestos in Phenolic Adhesives (1976)
A Union Carbide customer call report dated January 13, 1976, on a visit to Georgia Pacific Corp. in Albany, Oregon, to meet Joe Dede, Quality Control Manager. The stated objective was to overcome the toxicology problem…
-
Company document · Union Carbide documents · March 26, 1976
T. P. Norris Call Report on Chevron Asphalt Production Trial of HPP in Asphaltic Coatings (1976)
Metals Division customer call report dated 3/26/76 on a telecon with T. Fletcher of H&C about a production trial of HPP in asphaltic coatings for tennis courts and school grounds at Chevron Asphalt Co., Oakland. It says the first 200# of HPP was…
-
Company document · Union Carbide documents · March 24, 1976
Edward J. Kleber Call Report on Joslyn Electric, Woodstock, IL, Following Up RG-244 and RG-600 Samples (1976)
Metals Division customer call report by salesman Edward J. Kleber on a 3/24/76 call to Joslyn Electric (Woodstock, IL), with asbestos marked as the product discussed. The call followed up RG-244 and RG-600 samples sent after conversations at SPI. It…
-
Company document · Union Carbide documents · May 11, 1976
R. E. Byrne, Jr. Call Report on Hoosier Fiberglass Industries Inquiry About RG-600-PP (1976)
Customer call report of a 5/11/76 telephone call from Jim White of Hoosier Fiberglass Industries, a Terre Haute, Indiana thermoformer, asking about availability of RG-600-PP. The report says Hoosier vacuum forms a Noryl part and was shopping for a…
-
Company document · Union Carbide documents · March 11, 1976
Gordon L. Dickson Call Report on Hercules, Inc. Evaluation of RG-600 (1976)
Customer call report of a 3/11/76 visit to Hercules, Inc. (Wilmington, DE), a resin producer, to determine the status of its evaluation of RG-600. It records that Hercules' Robert H. Heinold described the RG-600 results as very good, reviewed…
-
Company document · Union Carbide documents · May 10, 1976
R. E. Byrne, Jr. Call Report on EIMCO Processing Machinery Division, Offer of PP Asbestos Concentrate (1976)
Customer call report on a May 10, 1976 call to EIMCO Processing Machinery Div. in Salt Lake City, where George Toelke was interviewed about PP (RG-600) concentrate. It records an agreement to supply 2000 lbs. of PP concentrate at 50-60¢/lb. for…
-
Company document · Union Carbide documents · December 5, 1975
Edward J. Kleber Customer Call Report on Chicago Mastic Div., U.S. Gypsum, Asbestos in Adhesives and Health Concerns (1975)
Metals Division customer call report of a 12-5-75 visit to Chicago Mastic Div., U.S. Gypsum, in Chicago. It records that the company was under corporate pressure to remove asbestos from its adhesives, that the salesman reviewed regulations and…
-
Company document · Union Carbide documents · March 29, 1976
J. E. Walsh Customer Call Report on Exxon, Baytown, Texas, Pushing RG-600 for Polyethylene and Polypropylene (1976)
Customer call report of a 3-29-76 visit to Exxon at Baytown, Texas, made by J. E. Walsh with R. E. Byrne to push RG-600 with Terry Huff, Project Leader. It records that Huff had a three-bag sample and was ready to test it in PE and PP resins, and…
-
Company document · Union Carbide documents · April 29, 1976
Edward J. Kleber Call Report on Inmont Corp., St. Louis, Discussing RG-144 and RG-600 for Hot Melt Adhesives (1976)
A Metals Division customer call report on a 4/29/76 routine call by salesman Edward J. Kleber on Inmont Corp. in St. Louis, an adhesives customer and small RG-144 user. The report says Inmont had no complaints and wanted literature on RG-600 for…
-
Company document · Union Carbide documents · March 11, 1976
G. L. Dickson Call Report on Stauffer Chemical Company, Delaware City, on RG-100 and RG-600 Samples (1976)
Customer call report of a 3/11/76 visit to Stauffer Chemical Company in Delaware City, DE, to follow up on a request for RG-100 and RG-600 samples. It records that the chemist, Doug Stevenson, had mainly academic interest, looked briefly at the…
-
Company document · Union Carbide documents · March 3, 1976
E. J. Kleber Call Report on Amoco Chemical Corp. (Naperville, IL) Regarding RG-600 in Structural Foam Pallets (1976)
Metals Division customer call report on a 3/3/76 visit by Edward J. Kleber, with R. E. Byrne, Jr., to Amoco Chemical Corp. in Naperville, IL. It records that Amoco's idea of using RG-600 in HDPE structural foam pallets had died for several reasons,…
-
Company document · Union Carbide documents · March 31, 1976
J. E. Walsh Call Report on Plastic Molders Supply, Fort Worth, Compounding of Calidria RG-600 (1976)
A Metals Division customer call report on Plastic Molders Supply (PMS) of Fort Worth, Texas, a colorants and additives compounder. It records a call with technical manager Ron Beasley about whether PMS could compound RG-600 in resins, mentions an…
-
Company document · Union Carbide documents · April 30, 1976
G. L. Dickson Call Report on HiTemp Wire Inc., Hauppauge, NY, Follow-Up on RG-244 and RG-600 Samples (1976)
Customer call report on a 4/30/76 visit to HiTemp Wire Inc., a coated wire maker in Hauppauge, NY, to follow up on samples of RG-244 and RG-600 sent the previous month. The salesman reported that HiTemp wanted better tensile strength and cold flow…
-
Company document · Union Carbide documents · April 29, 1976
J. E. Walsh Customer Call Report on Moldan, Pineville, North Carolina, Structural Foam Prospect (1976)
Customer call report on a visit to Moldan, a structural foam molder in Pineville, North Carolina, called on as a prospect for RG-600 (asbestos box checked). The salesman reported that he found Moldan not running, met its president at Industrial…