55 results for “Union Carbide Corporation”, page 1 of 3
-
Company document · Union Carbide documents · November 12, 1975
Union Carbide Customer Call Reports on General Tire, Toledo, Ohio: RG-244 Calidria Asbestos Plant Trial and Toxicology Questions (1975)
Three Union Carbide customer call reports dated November to December 1975 about General Tire, Toledo, Ohio, and its evaluation of Calidria RG-244 asbestos for a vinyl plastisol fabric coating. The reports record the customer's…
-
Company document · Union Carbide documents · October 20, 1976
J. E. Walsh Call Report and R. Marsten Memo on Celanese Plastics (Bishop, Texas) RG-144 Packaging Complaints and Fiber Levels (1976)
A customer call report by salesman J. E. Walsh covers an October 20, 1976 visit with Dick Martsen to Celanese Plastics in Bishop, Texas, about complaints on packaging of RG144 asbestos. It records the customer's fiber sampling at truck unloading and…
-
Company document · Union Carbide documents · November 13, 1975
E. J. Kleber Call Report on RG-600 Asbestos Seminar at General Electric, Appliance Park, Louisville (1975)
Customer call report on a seminar given to General Electric personnel at Appliance Park, Louisville, KY, on RG-600 and Calidria asbestos, with discussion of the OSHA situation. The report records that GE's medical department resisted using asbestos…
-
Company document · Union Carbide documents · August 11, 1975
T. P. Norris Call Report on Several San Francisco Area Customer Calls (Week of 8-11-75)
A four-page call report by T. P. Norris summarizing visits to San Francisco-area customers, including Diamond Shamrock, Imperial Coatings, Gibson-Homans, Rich-Tex, Intercoastal, Standard Oil, Chevron Asphalt, Kelly-Moore Paint and Bay Slurry Seal.…
-
Company document · Union Carbide documents · April 1, 1976
J. E. Walsh Customer Call Report on Island Plastics, Waco, Texas, Concerning RG-600 Asbestos Fiber (1976)
Customer call report dated April 1, 1976 on a visit to Island Plastics, a Waco, Texas maker of molded sports equipment, with R. E. Byrne and P. Smallwood. It records that Island had been unable to disperse a pallet of RG-600, tried compounding…
-
Company document · Union Carbide documents · March 26, 1976
T. P. Norris Call Reports on Chevron Asphalt and Chevron Chemical HPP Trials in Asphaltic Coatings (1975-1976)
Two Metals Division customer call reports by salesman T. P. Norris on efforts to sell HPP asbestos grade for asphaltic coatings to Chevron. The 3/26/76 report describes a production trial at Chevron Asphalt in Oakland, including mixing times against…
-
Company document · Union Carbide documents · June 9, 1976
T. P. Norris Call Report on Chevron Asphalt Company Evaluation of HPP and Competing Calaveras Asbestos (1976)
…Company) was the strong contender at $105.00/ton in Pressure Pack units, and that Union Carbide would continue to pursue the business. A handwritten note dated 7/9 refers to a 400 lb HPO evaluation…
-
Company document · Union Carbide documents · March 23, 1976
Gordon L. Dickson Call Report on Diamond Shamrock Corporation, Evans Research Center, Painesville, OH (1976)
Customer call report of a 3/23/76 visit by salesman Gordon L. Dickson to Leo Benezra, a research chemist at Diamond Shamrock's Evans Research Center in Painesville, Ohio, to follow up on requests for RG-100, RG-144 and RG-600 samples. Dickson…
-
Company document · Union Carbide documents · May 12, 1977
Edward J. Kleber Call Report on 48 Insulations, Aurora, IL, Regarding Silicomanganese Slag (1977)
A customer call report of an annual call on John Muschler, Purchasing Manager at 48 Insulations in Aurora, IL, a silicomanganese slag customer. Muschler asked whether slag could be shipped from the Tenn-Tex plant to a planned new plant in the…
-
Company document · Union Carbide documents · November 13, 1975
E. J. Kleber Customer Call Report on RG-600 Seminar at General Electric Appliance Park, Louisville (1975)
Customer call report on a seminar about RG-600 given to General Electric personnel at Appliance Park, Louisville, KY. It records that the OSHA situation and the Calidria asbestos story were presented, that G.E. could use about 1,000,000 lbs. of…
-
Company document · Union Carbide documents · January 13, 1976
Customer Call Report on Georgia Pacific Corp., Albany, Oregon: Proposed Use of RG 244 Asbestos in Phenolic Adhesives (1976)
A Union Carbide customer call report dated January 13, 1976, on a visit to Georgia Pacific Corp. in Albany, Oregon, to meet Joe Dede, Quality Control Manager. The stated objective was to overcome the toxicology problem…
-
Company document · Union Carbide documents · October 20, 1976
J. E. Walsh Call Report on Celanese Plastics (Bishop, Texas) RG144 Packaging Complaints, with R. O. Marsten's Visit Memo (1976)
A customer call report (pp. 1-2) by salesman J. E. Walsh on an October 20, 1976 visit to Celanese Plastics in Bishop, Texas, about torn bags and loose fiber on RG144 asbestos shipments and the customer's air sampling during truck unloading. It is…
-
Company document · Union Carbide documents · April 1, 1976
J. E. Walsh Customer Call Report on Island Plastics, Waco, Texas, Regarding RG-600 Asbestos Dispersion Trials (1976)
…Island had been unable to disperse the 600 and that a compounded run by Schulman did not fill the molds. Union Carbide planned to send compounded samples for testing once material arrived from Adell in Baltimore.
-
Company document · Union Carbide documents · September 16, 1975
R. E. Byrne, Jr. and G. L. Dickson Report of Call on Utex, Houston, on RG-600 Interest (1975)
Report of a call on Utex, a Houston maker of gaskets and packing, to determine the status of its interest in RG-600. The original contact was out ill, and his substitute, Charles Thrasher, knew nothing, had no interest in asbestos, and accepted a…
-
Company document · Union Carbide documents · July 10, 1975
H. B. Rhodes Report of Call on GDCI Executive Board Meeting in Tulsa (1975)
Report of call by H. B. Rhodes on a special meeting of the GDCI Executive Board in Tulsa, OK, to which he was invited to give the asbestos-health view and comment on OSHA activities. It also records his conversations with Frank Chebatoris of the…
-
Company document · Union Carbide documents · March 26, 1976
T. P. Norris Call Report on Chevron Asphalt Production Trial of HPP in Asphaltic Coatings (1976)
Metals Division customer call report dated 3/26/76 on a telecon with T. Fletcher of H&C about a production trial of HPP in asphaltic coatings for tennis courts and school grounds at Chevron Asphalt Co., Oakland. It says the first 200# of HPP was…
-
Company document · Union Carbide documents · November 12, 1975
J. E. Walsh Report of Call on Tampa Paint & Varnish (Mike Low) About Calidria 244 in Coatings (1975)
A Union Carbide report of a cold call by J. E. Walsh on Tampa Paint & Varnish, maker of Seminole Paints, to introduce Calidria 244 in coatings to technical director Mike Low. Walsh recorded that the company…
-
Company document · Union Carbide documents · March 24, 1976
Edward J. Kleber Call Report on Joslyn Electric, Woodstock, IL, Following Up RG-244 and RG-600 Samples (1976)
Metals Division customer call report by salesman Edward J. Kleber on a 3/24/76 call to Joslyn Electric (Woodstock, IL), with asbestos marked as the product discussed. The call followed up RG-244 and RG-600 samples sent after conversations at SPI. It…
-
Company document · Union Carbide documents · May 11, 1976
R. E. Byrne, Jr. Call Report on Hoosier Fiberglass Industries Inquiry About RG-600-PP (1976)
Customer call report of a 5/11/76 telephone call from Jim White of Hoosier Fiberglass Industries, a Terre Haute, Indiana thermoformer, asking about availability of RG-600-PP. The report says Hoosier vacuum forms a Noryl part and was shopping for a…
-
Company document · Union Carbide documents · September 17, 1975
R. E. Byrne, Jr. and G. L. Dickson Report of Call on General Electric (NASA), League City, Texas, on RG-600 Interest (1975)
Report of a call on General Electric personnel at NASA in League City, Texas, to determine the status of interest in RG-600. It records that NASA staff were interested in fire-resistant plastics for the space shuttle and skylab projects, were given…