21 results for “Union Carbide Corporation”, page 1 of 2
-
Company document · Union Carbide documents · June 30, 1987
Union Carbide Industrial Hygiene Asbestos Monitoring Reports for Silanes, Polymers and Monomers Areas, Prepared by C. R. McMillan and T. L. Grittie (1987)
Twelve pages of industrial hygiene monitoring and results reports dated June and July 1987, covering airborne asbestos sampling taken February to April 1987 around insulation removal, glove bag use and asbestos insulation in Silanes, Polymers and…
-
Company document · Union Carbide documents · April 7, 1987
T. L. Grittie, Industrial Hygiene Results on Asbestos Monitoring During Deinsulation of R-2 Reactor, Silanes (1987)
Industrial hygiene results dated April 7, 1987 for breathing-zone asbestos samples taken February 10, 1987 on insulators removing insulation from reactor R-2 in the Reactor Area of Silanes inside a negative pressure enclosure. The two samples…
-
Company document · Union Carbide documents · March 25, 1983
Industrial Hygiene Results: Insulation Sampling on Water Tank T-1098, Esters Area, by H. G. Kuntz and K. E. Williams (1983)
One-page industrial hygiene report dated March 25, 1983, on samples of loose and rigid insulation taken on March 23, 1983 from water tank T-1098 near the Esters tower. Chemical microscopy found no asbestos in either sample, and the report…
-
Company document · Union Carbide documents · May 7, 1987
G. W. Wulfert to F. E. Dailey and Others on Future Asbestos Disposal Sites at Sistersville (1987)
Memorandum dated May 7, 1987 stating that the Sistersville plant's asbestos disposal landfill was nearing the end of its life and that a new plan was needed. It called a meeting on May 26, 1987 at 1 PM in Building 33 to develop that plan.…
-
Company document · Union Carbide documents · November 7, 1986
D. A. Boggs to S. L. Curtis on Serious Asbestos Health Hazard in the Monomers North Rectification Area, Sistersville Plant (1986)
Memo from the Sistersville Plant industrial hygienist reporting exposed, deteriorating asbestos insulation on distillation columns in the Monomers North Rectification Area and chunks of asbestos material found on the ground up to about 60 yards…
-
Company document · Union Carbide documents · May 27, 1987
G. W. Wulfert Minutes of the 'Future Asbestos Disposal Site(s)' Meeting, with Related Memos on the Sistersville Asbestos Landfill (1987)
Union Carbide Sistersville, WV plant memos from May 1987 about the plant's asbestos landfill, which held asbestos insulation removed from plant equipment. The May 27 minutes record an estimate that the present landfill had about…
-
Company document · Union Carbide documents · October 29, 1986
W. V. Summers to D. Liebeskind on the Sistersville Asbestos Insulation Upgrade Project (1986)
Memo dated October 29, 1986 from W. V. Summers at the Sistersville, WV plant to D. Liebeskind, with copies to six others, giving comments on the plant's asbestos insulation upgrade project. It describes damaged installed asbestos insulation as the…
-
Company document · Union Carbide documents · April 6, 1987
T. L. Grittie Industrial Hygiene Results on Glove Bag Asbestos Insulation Removal and Transite Roof Removal (1987)
Two Industrial Hygiene Results reports dated April 6, 1987. The first reports airborne fiber sampling of insulators removing asbestos insulation by the glove bag technique at the SSP Unit, K-36, and recommends closer scrutiny of the method. The…
-
Company document · Union Carbide documents · June 20, 1987
Industrial Hygiene Monitoring Report on Asbestos Exposure Concern in the Monomers Control Room, by C. R. McMillan and T. L. Grittie (1987)
One-page industrial hygiene monitoring report dated June 20, 1987, on an area air sample taken 2/13/87 in the Monomers control room after loose insulation fell onto the roof near the ventilation intake. The sample result was
-
Company document · Union Carbide documents · January 11, 1988
K. B. Purinton to W. C. Nycz on Three Year Plant Insulation Upgrade Program, Sistersville (1988)
Memo from K. B. Purinton at the Sistersville, WV plant setting out criteria for insulation to be included in a three-year plant insulation upgrade program, including asbestos insulation in areas of high mechanical disturbance. It states that…
-
Company document · Union Carbide documents · March 18, 1986
T. L. Grittie to D. A. Boggs and Others on McCrone Analysis of Jaxsan Insulation Samples at Sistersville (1986)
Memo from T. L. Grittie transmitting McCrone Environmental Services' analysis of five Jaxsan insulation samples from the Sistersville plant. The memo reports 7-15% chrysotile asbestos, higher than the supplier had stated, and says the material…
-
Company document · Union Carbide documents · March 18, 1986
T. L. Grittie to D. A. Boggs and Others on McCrone Analysis of Jaxsan Insulation Samples for Asbestos (1986)
Memo from the Sistersville plant industrial hygienist transmitting McCrone Environmental Services' analysis of five Jaxsan samples. It reports 7-15% chrysotile, higher than the supplier indicated, says the IH group will monitor insulators during…
-
Company document · Union Carbide documents · February 6, 1987
W. V. Summers to D. G. Beddow, K. F. Carroll and L. W. Phair on Asbestos Removal Strategy at the Sistersville Plant (1987)
Memo from W. V. Summers transmitting a brief on the Sistersville plant's strategy and resources for meeting newly required OSHA asbestos handling guidelines, with cost estimates for materials and personnel. Attached is a draft procedure for…
-
Company document · Union Carbide documents · March 20, 1987
C. A. Eddy to E. C. Buford and Others on March 19, 1987 Meeting Minutes, Methyls Columns Asbestos Insulation Removal at Sistersville (1987)
Minutes, dated March 20, 1987, of a March 19, 1987 meeting at the Sistersville Plant to plan removal of asbestos insulation from six methyls columns. They list 19 items on the handling of each column, use of a negative pressure enclosure, area…
-
Company document · Union Carbide documents · June 30, 1987
T. L. Grittie Industrial Hygiene Reports on Insulator Asbestos Exposure Monitoring at Monomers and Polymers II (1987)
Two industrial hygiene reports dated June 30, 1987 on airborne asbestos fiber sampling of insulators. The first covers patching insulation on a T-3 methyl chloride tank in Monomers (3/26/87 samples, all below the PEL); the second covers removing…
-
Company document · Union Carbide documents · May 4, 1983
Industrial Hygiene Results on Asbestos in Insulation Samples from Polymers I, by H. G. Kuntz and K. E. Williams (1983)
One-page industrial hygiene report dated May 4, 1983, on samples of pipe insulation taken at Polymers I on 4-11-83 and 4-12-83 and examined by chemical microscopy. No asbestos was noted in insulation from K-41 piping, while insulation on a steam…
-
Company document · Union Carbide documents · July 1, 1987
T. L. Grittie Industrial Hygiene Results on Asbestos Monitoring of Insulators (Tank Farm 4) and the Poly I Control Room (1987)
Two industrial hygiene result sheets dated July 1, 1987, reporting asbestos air sampling done in April 1987. Page 1 covers insulators using glove bags to strip T-111 in Tank Farm 4 in Silanes, and page 2 covers the Poly I control room, where…
-
Company document · Union Carbide documents · July 1, 1987
T. L. Grittie, Industrial Hygiene Results for Area Monitoring Near Exposed Asbestos on Silanes Rectification Tower (1987)
One-page industrial hygiene report dated July 1, 1987, on an area air sample taken on 4/29/87 near exposed asbestos on a vertical line on the fourth deck of the Silanes Rectification tower. The single 386-minute sample was reported at
-
Company document · Union Carbide documents · June 30, 1987
Industrial Hygiene Monitoring Report on Area Asbestos Sampling N.E. of Tank Farm 3, Silanes, by C. R. McMillan and T. L. Grittie (1987)
One-page industrial hygiene monitoring report dated June 30, 1987, on an area air sample collected 3/24/87 northeast of tank farm number 3 in Silanes, where white fibers were seen floating in the air. The sample result was below 0.005 f/cc, with a…
-
Company document · Union Carbide documents · May 27, 1986
Kay M. Hayes (University of Cincinnati) to John Kyle, Union Carbide, on Passing the "Safe Methods of Asbestos Removal" Exam, with Certificate (1986)
Letter from the University of Cincinnati's Continuing Education director telling John Kyle of Union Carbide Specialty Chemicals (Sistersville, WV) that he passed the examination for the May 6-9, 1986 course "Safe Methods of Asbestos…