24 results for “Union Carbide Corporation”, page 1 of 2
-
Company document · Union Carbide documents · January 26, 1973
D. E. Furlani Trip Report on Inspection of Shrink-Wrapped Asbestos Pallets Shipped to Georgia-Pacific, Akron, New York (1973)
Report No. 73-T-7 on a January 18, 1973 trip to the Georgia-Pacific plant in Akron, New York, to inspect a rail shipment of SG-210 asbestos on pallets, two of which were shrink-wrapped at King City. It describes the condition of each pallet,…
-
Company document · Union Carbide documents · August 21, 1970
Paul W. McDaniel to J. A. Riddle on Air Sample Particle Counts at the King City Asbestos Mine (1970)
Internal Union Carbide correspondence reporting particle counts from air samples taken at the asbestos mine near King City, at the bulldozer operator, front loader operator and pit floor around the grizzly. The writer stated that the…
-
Company document · Union Carbide documents · October 20, 1976
J. E. Walsh Call Report on Celanese Plastics (Bishop, Texas) RG144 Packaging Complaints, with R. O. Marsten's Visit Memo (1976)
A customer call report (pp. 1-2) by salesman J. E. Walsh on an October 20, 1976 visit to Celanese Plastics in Bishop, Texas, about torn bags and loose fiber on RG144 asbestos shipments and the customer's air sampling during truck unloading. It is…
-
Company document · Union Carbide documents · November 27, 1973
R. E. Byrne, Jr. Informal Report on TiO2 Contamination of RG-244 During the T-135 Plant Run (1973)
Informal report describing TiO2 contamination found in RG-244 asbestos produced during the August 15-22, 1973 T-135 plant run at King City. It reports TiO2 levels up to almost 3%, no correlation between TiO2 content and thickening efficiency, sales…
-
Company document · Union Carbide documents · December 6, 1973
B. L. Ingalls Project Report on Shrink-Wrap Packaging Tests for Calidria Bags and Pallets (1973)
…tests, with Tables I and II, cost information and conclusions Union Carbide Films-Packaging Division sheet on pallet wrapping for outdoor storage, with outdoor exposure test charts Sample cost calculations for bag and pallet shrink-film
-
Company document · Union Carbide documents · April 29, 1980
P. R. Sherman Design Memorandum on Asbestos Bagging Improvement at King City (1980)
Design memorandum (Design Memo No. 1, Revision No. 0, File No. 11217) by P. R. Sherman on improving the bagging of asbestos shipments at King City, CA. It describes efforts to develop a dust-free bag with a better bag wrap and a bag closure system…
-
Company document · Union Carbide documents · June 1, 1972
Paul W. McDaniel to J. L. Myers on Asbestos Dust Exposure Study at American Biltrite, Los Angeles (1972)
Internal Union Carbide letter from the Medical Department's industrial hygiene engineer reporting a May 24, 1972 air-sampling study at American Biltrite Co., Los Angeles, of asbestos dust exposure in vinyl floor tile production. It…
-
Company document · Union Carbide documents · September 19, 1973
G. L. Dickson to J. L. Myers on Evaluation of the King City RG-244 Production Facility, with Attached Report (1973)
Internal memo from G. L. Dickson to J. L. Myers, with an attached report, summarizing a three-week visit to the King City plant in August 1973. It concluded that only a 5-10% increase in RG-244 production was possible from present facilities and…
-
Company document · Union Carbide documents · July 19, 1973
J. E. Walsh Report of Call to Bridgeport Chemical (Paul Meli) on Calidria 244 in Epoxy Repair Kits and Asbestos Publicity (1973)
Report of a call on Bridgeport Chemical, a maker of epoxy resin-hardener repair kits in Pompano Beach, Florida, with Executive Vice President Paul Meli. The report says Meli was concerned about newspaper articles on asbestos and that the writer…
-
Company document · Union Carbide documents · July 10, 1979
W. G. Kahler II to T. R. Alexander and Others on DOT Docket HM-160, Transportation of Asbestos, with Commenter Lists and DOT Regulatory Evaluation (1979)
Internal Union Carbide memo transmitting a copy of DOT's regulatory evaluation for Docket HM-160 (transportation of asbestos) and two lists of parties that commented on the Notice of Proposed Rulemaking and on the Final…
-
Company document · Union Carbide documents · July 24, 1979
M. D. Michaud to T. R. Alexander et al. on DOT Meeting and Request to MTB, Docket HM-160, Transportation of Asbestos (1979)
Internal Union Carbide memo reporting on a July 19, 1979 meeting between DOT officials and UCC staff about Docket HM-160 asbestos transportation rules. It encloses UCC's July 23, 1979 letter to the Materials Transportation…
-
Company document · Union Carbide documents · June 11, 1979
John L. Myers to T. R. Alexander on DOT Regulations for Shipping Calidria Asbestos (1979)
Internal memo from the Metals Division's Calidria asbestos group responding to a 5/24/79 letter about the revised DOT regulations effective 8/20/79. It discusses problems with bulk shipments, less-than-pallet shipments, and package marking, and it…
-
Company document · Union Carbide documents · November 21, 1973
G. L. Dickson to R. O. Marsten on Sodium Silicate Usage in King City RG-244 Production (1973)
Internal memo from G. L. Dickson to R. O. Marsten at King City comparing the amount of sodium silicate used in producing RG-244 with the theoretical requirement. The attached Table I lists monthly RG-244 production, sodium silicate usage and…
-
Company document · Union Carbide documents · March 27, 1979
W. G. Kahler II Telecommunications Message on DOT Response to Petitions for Reconsideration of Docket HM-160, Transportation of Asbestos (1979)
A Union Carbide telecommunications message entry form from W. G. Kahler II, dated 3/27/79, about petitions for reconsideration of DOT Docket No. HM-160 on transportation of asbestos. It reported that DOT's response…
-
Company document · Union Carbide documents · November 23, 1981
Safety Audit Team (R. L. Folkman, E. A. Piersall, H. B. Rhodes) to R. J. Kronkhyte, J. L. Myers and R. O. Marsten on the King City Safety/Health Audit (1981)
Internal memo from the Metals Division Safety department reporting the conclusions of its October 26-27, 1981 safety/health audit of the King City plant. It reviews follow-up items from the prior audit, rates the safety program elements, and notes…
-
Company document · Union Carbide documents · December 21, 1978
H. B. Rhodes to T. R. Alexander and Others on DOT Docket HM-160 Asbestos Transportation Regulation and Its Impact on Calidria Shipments (1978)
Internal Metals Division memo describing the Department of Transportation's December 4, 1978 final rule requiring commercial asbestos to be shipped as an ORM-C hazardous material, effective April 30, 1979. It assesses the impact on Calidria…
-
Company document · Union Carbide documents · October 23, 1974
H. B. Rhodes Transmittal and Report 'Supervisbestos – A Review of Product Quality Trends and Competitive Market Position' (1974)
Internal cover memo from H. B. Rhodes transmitting his report on Supervisbestos, the Calidria asbestos drilling-mud additive sold through distributor Montello. The report compares Supervisbestos, Visbestos, Flosal and Atlas 1092 in mixing tests and…
-
Company document · Union Carbide documents · July 5, 1979
W. B. DeAtley to O. J. Malacarne on Double Wrapping and Palletizing Calidria Products to Meet DOT Regulations (1979)
Internal correspondence from the King City office to O. J. Malacarne stating that double wrapping and palletizing of material shipped to warehouses and distributors had begun to meet new DOT regulations effective August 20, 1979. It lists the…
-
Company document · Union Carbide documents · October 6, 1980
John L. Myers to T. R. Alexander on Export Packaging Requirements for Asbestos (IMCO) (1980)
Internal Union Carbide memo in which John L. Myers thanked T. R. Alexander for information on IMCO requirements for packaging asbestos for export and posed questions about IMCO's role, drop tests, bag markings, and "sift…
-
Company document · Union Carbide documents · March 16, 1979
John L. Myers to E. W. Shortridge on DOT "ASBESTOS-ORM-C" Marking for Packages and Bulk Hopper Cars (1979)
Internal Metals Division memo from John L. Myers to E. W. Shortridge at King City, dated March 16, 1979, on the new DOT marking "ASBESTOS-ORM-C" for packages of asbestos and bulk hopper cars. It suggests checking with SP about bulk cars on the…