Environmental Monitoring and Assessment

Our medical research library holds 20 studies published in Environmental Monitoring and Assessment (2009–2024). Each entry links to the study's record on PubMed and, where there is one, to the publisher's page and a free full text. 20 have an abstract, the authors' own summary as PubMed records it: open "Abstract" to read it.

About the journal

• Publisher: Springer
• Published: 1981 to the present, Netherlands
• Language: English
• ISSN: 0167-6369 (print), 1573-2959 (electronic)
• Its record in the NLM Catalog

2020s

• Use of agent-based modeling to analyze potential non-occupational exposures to asbestos of the general population of Sibaté (Colombia). F. Duraffour, J.P. Ramos-Bonilla, B. Lysaniuk. 2024;196(10):900. PubMed · Publisher

  Abstract

  Previous studies conducted in the municipality of Sibaté (Colombia) have revealed alarming findings regarding asbestos exposure in the region, as it is the site of the country's first mesothelioma cluster. Non-occupational asbestos exposure events were identified in this population, and the young age of the mesothelioma cases at the time of diagnosis suggests that asbestos exposure occurred during their childhood. The creation of landfilled zones in the 1980s and 1990s, utilizing friable asbestos among other disposed materials, may have been a significant asbestos exposure event contributing to the elevated number of mesothelioma cases. The objective of this study was to model various historical exposure scenarios related to the creation and interaction of the population with asbestos-contaminated landfilled zones, in light of the absence of asbestos monitoring in the region. The models utilized a multi-agent simulation process, focusing on a 10-year period (1986-1995). Various relevant variables were incorporated into the modeling process, including, for example, the number of children playing in the landfilled zones and the percentage of children carrying asbestos fibers on their clothes to their homes. A range of values for input data for the models were utilized, spanning from very conservative numbers to exposure-promoting values. The average number of exposed individuals estimated over 750 simulation runs, considering all scenarios, was 571, with a range between 31 and 3800 exposed individuals. The use of multi-agent simulation models can assist the understanding of past asbestos exposure events, especially when there is a lack of environmental surveillance data.

  © 2024. The Author(s), under exclusive licence to Springer Nature Switzerland AG.

• Assessment of worst-case potential airborne asbestos exposure associated with the use of cosmetic talc: application of an exponential decay model. E.W. Miller, E.M. Beckett, B. Roberts, et al. 2023;196(1):39. PubMed · Publisher

  Abstract

  Talc is used in cosmetic products to confer desirable properties, such as moisture absorption and smooth texture, to the finished products. Concerns have been raised about the potential presence of asbestos in products containing cosmetic talc. Reconstruction of potential asbestos exposure from the use of cosmetic talc products (assuming a trace level of asbestos) requires consideration of consumer use patterns. Although application generally only lasts seconds, exposure theoretically may continue if the consumer remains in the immediate vicinity. Most published exposure measurements have not adequately characterized the potential for continued exposure. In this analysis, estimates and measurements of airborne asbestos fiber concentrations associated with cosmetic talc use from 10 published studies were used as inputs to an exponential decay model to estimate "worst-case" exposure during and following application. The resulting geometric mean 30-min time-weighted average (TWA) concentrations were 0.006 f/cc for both puff and shaker application, for diapering, 0.0001 f/cc (adult applying baby powder) and 0.0002 f/cc (infant), and for makeup application, 0.0005 f/cc. Application of an exponential decay model to measured or estimated asbestos concentrations associated with the use of cosmetic talc products yields a conservative means to comprehensively reconstruct such exposures. Moreover, our results support that, if a cosmetic talc powder product contained a trace level of asbestos fibers, the "worst-case" airborne asbestos exposure associated with its application is low.

  © 2023. The Author(s), under exclusive licence to Springer Nature Switzerland AG.

• Chemometric and risk assessment of nitrogen composition of atmospheric rainwater from diverse surfaces in Rivers State, Nigeria. J.K. Nduka, D.O. Omokpariola, H.I. Kelle, et al. 2022;194(11):807. PubMed · Publisher

  Abstract

  Organic and inorganic nitrogen ions in the environment play important role across environmental matrices. Rainwater samples collected from ambient and different roofing surfaces (zinc, aluminium, asbestos and stone-coated roofing sheets) from selected locations at Ogale, Rumuodomaya/Rumuodome, Diobu and Chokocho within Rivers State, Niger Delta, Nigeria, from April to June, July to August and September to October depicting three regiments of early, mid and late rains. The samples were analysed for Kjeldahl nitrogen, ammonium, nitrate and nitrite using APHA methodology. Quantitative assessment showed that Kjeldahl nitrogen were in range of 0.11 to 28.05 mg/L; ammonium 0.50 to 20.22 mg/L, nitrate from 0.12 to 22.69 mg/L and nitrite from 0.15 to 3.90 mg/L. Parameters decreased from early to late rain, which can be attributed to rain dilution factor potential, wind pattern and emission from anthropogenic sources that influenced the rainwater quality across surfaces. Nitrogen results showed that dry and wet deposition has great impact; atmospheric aerosols and biogeochemical interactions can affect water quality. Monthly variation showed that Ogale had high regression compared to other locations due to close proximity to oil and gas emission and marine contribution. Neutralization factor showed that nitrate-nitrite compounds have strong correlation with ammonium ion. Non-carcinogenic risk assessment using US EPA model showed hazard index less than one (1), thus no associated health effect of nitrate and nitrite in rainwater. In conclusion, it is evident that nitrate/nitrite levels and other nitrogen derivatives in rainwater in crude oil-producing Niger Delta and its continuous consumption can cause negative health outcome.

  © 2022. The Author(s), under exclusive licence to Springer Nature Switzerland AG.

• Distinguishing asbestos cement from fiber-reinforced cement through portable µ-Raman spectroscopy and portable X-ray fluorescence. A. Bloise, D. Miriello. 2022;194(10):679. PubMed · Publisher

  Abstract

  It is now widely acknowledged that asbestos can adversely affect human health; accordingly, in recent decades, fiber-reinforced cement (FRC) has been used as a substitute for asbestos cement (AC). This manuscript focuses on portable micro-Raman spectroscopy coupled with portable microscopy (p-µR) and portable X-ray fluorescence (p-XRF) as a means to identify chrysotile fibers in AC (Eternit) and fibers present in the asbestos-free FRC used as a substitute. Our results show that the simultaneous use of portable devices such as p-µR and p-XRF may be useful in quickly identifying fibrous chrysotile asbestos in Eternit, as well as polyvinyl fibers in new material FRC used as substitutes for Eternit. Chrysotile shows bands in the 800-200 cm-1 range, whereas polyvinyl alcohol fibers show bands in the 3000-800 cm-1 range. The p-XRF data on the two types of cement could possibly be used as a chemical fingerprint for the two different materials. Given that exposure to asbestos is a serious health hazard, its rapid and reliable detection in situ on residential buildings is important both for citizens and for administrative bodies charged with safeguarding public health. We believe that our study provides valuable insight into the potential use of portable devices for identifying asbestos and asbestos-free materials.

  © 2022. The Author(s), under exclusive licence to Springer Nature Switzerland AG.

• Ecological and human health risk assessment of potentially toxic element contamination in waters of a former asbestos mine (Canari, Mediterranean Sea): implications for management. M. Marengo, L. Fullgrabe, Q. Fontaine, et al. 2022;195(1):150. PubMed · Publisher

  Abstract

  Between 1948 and 1965, the Canari asbestos mine (Corsica, France) discharged 11 million tonnes of serpentinite rubble into the sea. This study, therefore, aims to assess the environmental and health risks associated with contamination of potentially toxic elements using bioindicators (seagrass and fish) in the areas bordering the former mine within the perimeter of the Cap Corse and Agriate Marine Natural Park. The results and multivariate statistical analyses of the potentially toxic elements, made it possible to identify a concentration gradient, a model of bioaccumulation, and the occurrence of different groups, thus reflecting a spatial variation of the contamination. These results indicate that the former asbestos mine can still be considered, 55 years after its closure, as a major source of Co, Cr, and Ni for marine ecosystems and still influences the quality of the coastal area today. Our study, therefore, indicates that the two most polluted sites (Albo and Negru) are the closest stations to the south of the old Canary asbestos mine. According to the Trace Elements Pollution Index (TEPI) values, 6 species were classified as having a high contamination level: Scorpaena notata (1.37), Scorpaena porcus (1.36), Sepia officinalis (1.27), Diplodus vulgaris (1.02), Spicara maena (0.95), and Mullus surmuletus (0.94). Regarding the potentially toxic elements measured in the edible tissues of fish, the concentrations were all below the regulatory thresholds and did not reveal any potential risk to human health (Cd, Cu, Fe, Pb, Se, Sn, Zn). This work provides new and useful information to improve the monitoring of the environmental quality of a region characterized by previous mining activity and to assess the potential risk to human health due to the consumption of fish. Beyond the purely scientific aspects, these results could serve as decision support at the regional level for the definition of long-term public policies.

  © 2022. The Author(s), under exclusive licence to Springer Nature Switzerland AG.

• Extraction and determination of organic/inorganic pollutants in the ambient air of two cities located in metropolis of Tehran. M. Kermani, A. Jonidi Jafari, M. Gholami, et al. 2022;194(3):204. PubMed · Publisher

  Abstract

  In the present study, PM2.5, volatile organic compounds (VOC), heavy metals, and polycyclic aromatic hydrocarbons (PAHs)-bonded PM2.5 as well as asbestos fibers were investigated in two cities in the east of Tehran, Iran. To this end, 72 samples were collected from six stations located in the cities of Varamin and Pakdasht from March 2018 to March 2019. The concentration of BTEX compounds, PAHs, and heavy metals were measured using gas chromatography-flame ionization detector (GC-FID), gas chromatography-mass spectrometry (GC-Mas), and inductively coupled plasma atomic emission spectroscopy (ICP-OES), respectively. In addition, phase contrast microscopy (PCM) method was used to identify the properties of asbestos fibers. The results obtained from the present showed that the mean concentrations of PM2.5, heavy metals, PAHs, BTEX, and asbestos fibers were 52.05 µg/m3, 319.08 ng/m3, 3.97 ng/m3, 40.58 µg/m3, and 2.84 f/L, respectively. In addition, the results obtained from PCA and heavy metals sources showed that transport fleets were the natural source of most of these pollutants. In case of PAH sources, transport and incineration of coal had the highest contribution in the emission. Furthermore, the risk assessment showed that most of the compounds have a higher risk value than the guideline value spatial distribution and also showed that stations close to airports, city terminals, and highways were more polluted than other parts of the city. Therefore, in order to have healthy air and with the least pollution, it seems necessary to formulate the necessary strategies in the cities of Varamin and Pakdasht.

  © 2022. The Author(s), under exclusive licence to Springer Nature Switzerland AG.

2010s

• Effects of calcareous and serpentinite parent material on the mineral characteristics of soils and plant material of Teucrium montanum L. (Lamiaceae). N.M. Zlatić, M.S. Stanković. 2019;191(9):564. PubMed · Publisher

  Abstract

  The objective of this study was to determine eco-edaphic characteristics and influence of different substrates on mineral characteristics of facultative serpentinophyte. The total concentration of 20 elements Al, As, B, Ca, Cd, Co, Cr, Cu, Fe, K, Li, Mg, Mn, Na, Ni, P, Pb, S, Se, and Zn in soil samples and aboveground parts of medicinal plant species Teucrium montanum from various calcareous and serpentinite habitats in the territory of Serbia was determined. The concentration of the elements was established by inductively coupled plasma optical emission spectrometry-ICP-OES. The obtained results showed that the quantities of certain elements Al, As, B, Ca, Cd, Cu, K, Li, P, Se, and Zn were detected more in the soil samples from calcareous habitats in comparison to the quantities of other metals Co, Cr, Fe, Mg, Mn, Na, Ni, which were more frequently found in the soil samples from the serpentinite habitats. Analyzed plant samples from calcareous habitats contained higher concentrations of Al, Ca, Li, and Zn as opposed to serpentinite containing higher concentrations of Co, Cr, Fe, Mg, Mn, Na, Ni, and Se. Examined species can accumulate macro- and microelements in different quantities, depending on the substrate type. Differences in the concentration of certain elements in the soil samples and aboveground parts of the T. montanum from calcareous and serpentinite habitats indicate significant phenotypic plasticity of the investigated species as well as the existence of specific serpentinite ecotypes developed by the activity of various edaphic factors.

• Risk assessment of asbestos-cement roof sheets in Chekka, North Lebanon. A. Kfoury, G. Mitri, D. Arab, et al. 2019;191(6):391. PubMed · Publisher

  Abstract

  Asbestos-cement was manufactured and used in Lebanon since the early 1950s. Corrugated rooftops of asbestos-cement were mostly spread within residential areas throughout the country. These rooftops are subject to weathering factors which are known to increase friability and risk of hazardous fiber release. This study aimed at assessing the asbestos-cement rooftop friability and the possible emerging risks in the urban-industrial city of Chekka, North Lebanon. The evaluation of the asbestos-cement included two field assessment algorithms and a standardized pull-up test. Hazard of fiber emissions was assessed by a pull-up test method, whereas vulnerability was determined by a level of interaction between people and the rooftops. Geographic object-based image analysis was used to map hazard, vulnerability, and risk of asbestos rooftops in the study area. The field algorithms classified most rooftops in a bad state compared with the pull-up test which ranked most of them as good. The X-ray diffraction analysis showed the presence of serpentine and amphibole fibers, except for crocidolite, in some rooftop samples. Hazard, vulnerability, and risk maps of the sampled area showed how hazard potential was amplified by vulnerability of population to possible fiber emission.

• Topsoil and urban dust pollution and toxicity in Taranto (southern Italy) industrial area and in a residential district. M. Trifuoggi, G. Pagano, R. Oral, et al. 2018;191(1):43. PubMed · Publisher

  Abstract

  Adverse environmental conditions in the Taranto area (southern Italy) were investigated in studies of air, marine sediment, and human health. The present study aimed at providing unprecedented information on soil pollution and toxicity in a set of sites around recognized pollution sources in the Taranto area, since previous studies were focused on marine or air pollution, or on human health effects. The investigated area included a steel foundry and a power plant, as well as some sites located in an adjacent neighborhood. Surface soil samples and urban dust were collected and submitted to inorganic and organic analyses and tested for toxicity in two invertebrate bioassay models; a sea urchin (Sphaerechinus granularis) and an annelid (Caenorhabditis elegans). Inorganic analysis was carried out using ICP-MS for elemental composition for a total of 34 elements, whose levels were evaluated as a function of bioassay data analyzed through principal component analysis (PCA). Other analyses included asbestos search by powder X-ray diffraction (PXRD) and organic analysis for polycyclic aromatic hydrocarbons (PAHs) and aliphatic compounds (C10-C40). Toxicity bioassays were carried out on a sea urchin (Sphaerechinus granularis), and an annelid (Caenorhabditis elegans). Sea urchin bioassays evaluated effects of topsoil or street dust sample exposures (0.1 to 0.5% dry wt/vol) on developing embryos and on sperm, and scored as (a) % developmental defects, (b) inhibition of fertilization success and offspring damage, and (c) frequencies of mitotic aberrations. C. elegans mortality assay displayed significant toxicity associated with soil samples. The overall effects of samples showed very high toxicity at four out of nine sites. These effects were consistent with the highest levels measured for metals and PAHs. Further studies of health effects related to dust exposures in residential areas are warranted. Graphical abstract ᅟ.

• Quality assessment and public health status of harvested rainwater in a peri-urban community in Edo State of Nigeria. I.H. Igbinosa, I.T. Aighewi. 2017;189(8):405. PubMed · Publisher

  Abstract

  The harvested rainwater is an alternative water source in communities where there is limited or scarcity of water distribution system. However, contamination of roof-harvested rainwater is of immense concern to the general public health. Therefore, this study was initiated to assess the levels of physicochemical quality and heavy metal concentrations in the harvested rainwater from Oluku communities in Benin City, Edo State, Nigeria. The roof-harvested rainwater samples were collected from 20 independent different residential households in Oluku communities, between April 2015 and September 2015. Physicochemical analyses were carried out using standard analytical methods, and heavy metal concentrations were determined using atomic absorption spectrophotometry. The evaluation of the rainwater harvesting shows that 60% (12/20) of the roofs were made of corrugated iron sheets; aluminum sheets, 20% (4/20); asbestos, 10% (2/20); and open space was 10% (2/20). Also, the storage systems used for the storage of harvested rainwater were as follows: PVC tanks, 20% (4/20); drums, 30% (6/20); buckets, 25% (5/20); and wells, 25% (5/20). The physicochemical indicators investigated (temperature, nitrate, chlorine content, electrical conductivity, phosphate, total dissolved solids, and sulfate) were within World Health Organization (WHO) guidelines. However, some pH levels of the roof-harvested rainwater were acidic and below the WHO standard. Furthermore, a high value of turbidity was observed in some locations and exceeded the WHO guidelines. Though some heavy metal indicators (Zn, Na, K, and Ca) in this study were within the WHO guidelines, some locations revealed heavy metal (Cu, Fe, and Cd) concentrations slightly above the WHO guidelines. There is need for proper rainwater harvesting system and continuous monitoring of harvested rainwater for potable uses.

• Permutation/randomization-based inference for environmental data. R.C. Spicer, H.J. Gangloff. 2016;188(3):147. PubMed · Publisher

  Abstract

  Quantitative inference from environmental contaminant data is almost exclusively from within the classic Neyman/Pearson (N/P) hypothesis-testing model, by which the mean serves as the fundamental quantitative measure, but which is constrained by random sampling and the assumption of normality in the data. Permutation/randomization-based inference originally forwarded by R. A. Fisher derives probability directly from the proportion of the occurrences of interest and is not dependent upon the distribution of data or random sampling. Foundationally, the underlying logic and the interpretation of the significance of the two models vary, but inference using either model can often be successfully applied. However, data examples from airborne environmental fungi (mold), asbestos in settled dust, and 1,2,3,4-tetrachlorobenzene (TeCB) in soil demonstrate potentially misleading inference using traditional N/P hypothesis testing based upon means/variance compared to permutation/randomization inference using differences in frequency of detection (Δf d). Bootstrapping and permutation testing, which are extensions of permutation/randomization, confirm calculated p values via Δf d and should be utilized to verify the appropriateness of a given data analysis by either model.

• Development of an automated asbestos counting software based on fluorescence microscopy. M. Alexandrov, E. Ichida, T. Nishimura, et al. 2015;187(1):4166. PubMed · Publisher

  Abstract

  An emerging alternative to the commonly used analytical methods for asbestos analysis is fluorescence microscopy (FM), which relies on highly specific asbestos-binding probes to distinguish asbestos from interfering non-asbestos fibers. However, all types of microscopic asbestos analysis require laborious examination of large number of fields of view and are prone to subjective errors and large variability between asbestos counts by different analysts and laboratories. A possible solution to these problems is automated counting of asbestos fibers by image analysis software, which would lower the cost and increase the reliability of asbestos testing. This study seeks to develop a fiber recognition and counting software for FM-based asbestos analysis. We discuss the main features of the developed software and the results of its testing. Software testing showed good correlation between automated and manual counts for the samples with medium and high fiber concentrations. At low fiber concentrations, the automated counts were less accurate, leading us to implement correction mode for automated counts. While the full automation of asbestos analysis would require further improvements in accuracy of fiber identification, the developed software could already assist professional asbestos analysts and record detailed fiber dimensions for the use in epidemiological research.

• Health risk associated with airborne asbestos. A. Pawełczyk, F. Božek. 2015;187(7):428. PubMed · Publisher · Free full text

  Abstract

  The following paper presents an assessment of health risks associated with air polluted with respirable asbestos fibers in towns of southwest Poland. The aim of the work was to determine whether or not any prevention measures are necessary in order to reduce the level of exposure to the pollutant. The risk assessment was carried out based on the air analyses and the latest asbestos toxicity data published by the Environmental Protection Agency (US EPA), USA and Office of Environmental Health Hazard Assessment (OEHHA). It was found that in some sites, the concentration of the asbestos fibers exceeded the acceptable levels, which should be a reason of special concern. The highest concentration of asbestos was found in town centers during the rush hours. In three spots, the calculated maximum health risk exceeded 1E-04 which is considered too high according to the adopted standards. So far, it has not yet been possible to find a reasonable method of ensuring the hazard reduction.

• Assessment of both environmental cytotoxicity and trace metal pollution using Populus simonii Carr. as a bioindicator. V. Sluchyk, I. Sluchyk, A. Shyichuk. 2014;186(10):6645-50. PubMed · Publisher

  Abstract

  The level of environmental pollution in the city of Ivano-Frankivsk (Western Ukraine) has been assessed by means of roadside poplar trees as bioindicators. Dividable apical meristem cells of rudimentary leaves were quantitatively analysed for mitotic activity and distribution. Anaphases were further examined for chromosomal aberrations. Male catkins were also examined for sterile pollens. Accumulation of trace elements in vegetative buds was also evaluated in order to reveal source(s) of environmental pollution. Poplar trees growing in the urban environment proved to have increased chromosomal aberrations (up to 4-fold) and increased pollen sterility (up to 4-fold) as well as decreased mitotic activity (by factor 1.5) as compared to control sampling site. The biomarker data correlate moderately with increased (up to 4-fold) concentrations of Ni, Zn, Pb, Cd and Cu in vegetative tissues suggesting that probable cause of the environmental cytotoxicity may be vehicle emissions. The maximum increase in chromosomal aberrations (7-fold) and the minimum mitotic activity (half of the control one) were recorded in poplar trees growing in industrial suburb in vicinity of large cement production plant. Taking in mind insignificant bioaccumulation of trace elements in the industrial suburb, the high environmental toxicity has been ascribed to contamination in cement and asbestos particulates.

• Evaluation of the impact of asbestos wastes on soils in Emene-Enugu, Southeastern Nigeria. O. Igwe, O.V. Omonona, O.S. Onwuka, et al. 2014;186(12):8063-80. PubMed · Publisher

  Abstract

  This study investigated the impacts of asbestos wastes on soils in Emene-Enugu, southeastern Nigeria, generated by the activities of a major asbestos products manufacturing company in southeastern Nigeria. The methods of investigation included vertical electrical sounding (VES), 2-D horizontal resistivity profiling (HRP), induced polarization (IP) survey, chemical analysis of plant tissues and standard penetration tests of soil samples. The 2-D HRP and IP identified six closed waste pits alongside the two active pits. The VES revealed four geoelectrical layers in the area: from bottom to top; the inferred lithologies included dark shale, clay, gravel and recent sands. The geochemical data results revealed that Cd concentration of the soils of the waste pits is above the contaminated land exposure assessment soil guideline value for residential and allotment land uses. The geochemical pollution indices classified the soils as "unpolluted" to "extremely polluted". Bioconcentration factor of Pb in plant tissues was found to be above recommended limits of 0.045. The geotechnical parameters indices revealed that the soils varied from "very soft" to "stiff" and "very loose" to "medium". Soils of the active pits have very low strength and bearing capacity while closed pits have high strength and bearing capacity. It may be safe, therefore, to conclude that as the wastes are completely turned into soils, they will assume geotechnical properties similar to those of natural soils.

• Concentrations of asbestos fibers and metals in drinking water caused by natural crocidolite asbestos in the soil from a rural area. B. Wei, B. Ye, J. Yu, et al. 2013;185(4):3013-22. PubMed · Publisher

  Abstract

  Asbestos fibers and metals in drinking water are of significant importance to the field of asbestos toxicology. However, little is known about asbestos fibers and metals in drinking water caused by naturally occurring asbestos. Therefore, concentrations of asbestos fibers and metals in well and surface waters from asbestos and control areas were measured by scanning electron microscopy (SEM), inductively coupled plasma (ICP) optical emission spectrometer, and ICP-mass spectrometry in this study. The results indicated that the mean concentration of asbestos fibers was 42.34 millions of fibers per liter by SEM, which was much higher than the permission exposure level. The main compositions of both asbestos fibers in crocidolite mineral and in drinking water were Na, Mg, Fe, and Si based on energy dispersive X-ray analysis. This revealed that the drinking water has been contaminated by asbestos fibers from crocidolite mineral in soil and rock. Except for Cr, Pb, Zn, and Mn, the mean concentrations of Ni, Na, Mg, K, Fe, Ca, and SiO2 were much higher in both surface water and well waters from the asbestos area than in well water from the control area. The results of principal component and cluster analyses indicated that the metals in surface and well waters from the asbestos area were significantly influenced by crocidolite mineral in soil and rock. In the asbestos area, the mean concentrations of asbestos fibers and Ni, Na, Mg, K, Fe, Ca, and SiO2 were higher in surface and well waters, indicating that asbestos fibers and the metals were significantly influenced by crocidolite in soil and rock.

• Composition of heavy metals and airborne fibers in the indoor environment of a building during renovation. M.T. Latif, N.H. Baharudin, P. Velayutham, et al. 2011;181(1-4):479-89. PubMed · Publisher

  Abstract

  The renovation of a building will certainly affect the quality of air in the vicinity of where associated activities were undertaken, this includes the quality of air inside the building. Indoor air pollutants such as particulate matter, heavy metals, and fine fibers are likely to be emitted during renovation work. This study was conducted to determine the concentration of heavy metals, asbestos and suspended particulates in the Biology Building, at the Universiti Kebangsaan, Malaysia (UKM). Renovation activities were carried out widely in the laboratories which were located in this building. A low-volume sampler was used to collect suspended particulate matter of a diameter size less than 10 μm (PM₁₀) and an air sampling pump, fitted with a cellulose ester membrane filter, were used for asbestos sampling. Dust was collected using a small brush and scope. The concentration of heavy metals was determined through the use of inductively coupled plasma-mass spectroscopy and the fibers were counted through a phase contrast microscope. The concentrations of PM₁₀ recorded in the building during renovation action (ranging from 166 to 542 μg m⁻³) were higher than the value set by the Department of Safety and Health for respirable dust (150 μg m⁻³). Additionally, they were higher than the value of PM₁₀ recorded in indoor environments from other studies. The composition of heavy metals in PM₁₀ and indoor dust were found to be dominated by Zn and results also showed that the concentration of heavy metals in indoor dust and PM₁₀ in this study was higher than levels recorded in other similar studies. The asbestos concentration was 0.0038 ± 0.0011 fibers/cc. This was lower than the value set by the Malaysian Department of Occupational, Safety and Health (DOSH) regulations of 0.1 fibers/cc, but higher than the background value usually recorded in indoor environments. This study strongly suggests that renovation issues need to be considered seriously by relevant stakeholders within the university in order to ensure that the associated risks toward humans and indoor environment are eliminated, or where this is not feasible, minimized as far as possible.

• Evaluation of exposure to the airborne asbestos in an asbestos cement sheet manufacturing industry in Iran. D. Panahi, H. Kakooei, H. Marioryad, et al. 2011;178(1-4):449-54. PubMed · Publisher

  Abstract

  Iran imports nearly 55,000 tons of Chrysotile asbestos per year and asbestos cement (AC) plants contribute nearly 94% of the total national usage. In the present study, airborne asbestos concentrations during AC sheet manufacturing were measured. The fiber type and its chemical composition were also evaluated by scanning electron microscopy (SEM), with energy-dispersive X-ray analysis. Airborne total fiber concentrations of 45 personal samples were analyzed by phase contrast microscopy. The results have highlighted that 15.5% of samples exceed the threshold limit value (TLV) established the American Conference of Governmental Industrial Hygienists, which is 0.1 fiber per milliliter (f/ml). Personal monitoring of asbestos fiber levels indicated a ranged from 0.02 ± 0.01 to 0.16 ± 0.03 f/ml. The geometrical mean was 0.05 ± 1.36 f/ml, which is considerably lower than the TLV. SEM data demonstrate that the fibrous particles consisted, approximately, of Chrysotile (55.89%) and amphiboles (44.11%). We conclude that the industrial consumption of imported Chrysotile asbestos is responsible for the high airborne amphibole asbestos levels in the AC sheet industry. More research is needed to improve characterization of occupational exposures by fiber size and concentration in a variety of industries.

• Chrysotile asbestos exposure in the manufacturing of thermal insulating boards. L.J. Bhagia, J.B. Vyas, M.I. Shaikh, et al. 2010;167(1-4):559-64. PubMed · Publisher

  Abstract

  Exposure to asbestos fibers has been extensively studied in milling, mining of asbestos fibers, and in industries manufacturing asbestos-cement sheets, pipes, etc. However, very few studies have been reported in asbestos textiles, brake lining workers, and insulation products. In the present investigation, chrysotile exposure monitoring was carried out in a small thermal insulating boards manufacturing facility. Twenty-eight samples were analyzed from various locations like feeding of raw materials, weighing, pressing, machine grinding, and hand finishing of final products. Twenty-five percent of the samples were found to be above ACGIH TLV of 0.1 fibers per milliliter. However, mean fiber concentrations were found to be lower than 0.1 fibers per milliliter, except for the process of feeding of raw materials where the mean fiber concentration was 0.1087+/-0.0631 fibers per milliliter.

2000s

• Quality comparison of tap water vs. bottled water in the industrial city of Yanbu (Saudi Arabia). M. Ahmad, A.S. Bajahlan. 2009;159(1-4):1-14. PubMed · Publisher

  Abstract

  This study was conducted to compare the quality of bottled water with potabilized desalinated tap water. Fourteen brands of local and imported bottled water samples were collected from the local market and analyzed for physicochemical parameters in the Royal Commission Environmental Laboratory. Results were compared with 5-year continuous monitoring data of tap water from different locations in Madinat Yanbu Al-Sinaiyah (MYAS) including storage tanks of desalination plant. Results show that there was no significant difference in the quality of tap water and bottled water. Bacteriological test was never found positive in the 5-year data in tap water. Similarly, physicochemical analysis shows the persistent quality of tap water. Based on hardness analysis, bottled and tap water are categorized as soft water. Trihalomethanes (THMs) study also indicates that traces of disinfection by products (DBPs) are present in both tap and bottled water and are much less than the World Health Organization and Environmental Protection Agency maximum permissible limits. It is also important to note that the tap water distribution network in MAYS is a high-pressure recirculation network and there is no chance to grow bacteria in stagnant water in pipe lines or houses. Recently, the Royal Commission has replaced the whole drinking water network, which was made of asbestos-cemented pipes with glass-reinforced plastic (GRP) pipes, to avoid any asbestos contaminations. Based on these results, it is concluded that drinking water distributed in the city is of very good and persistent quality, comparable with bottled water. Continuous monitoring also guarantees the safe drinking water to the community. Hence, it is the responsibility of the Royal Commission to encourage the peoples in the city to drink tap water as it is as good as bottled water even better than some of the brands and is monitored regularly. It is also much cheaper compared to bottled water and is available round the clock. Preference for tap water over bottled water will also reduce the production of bottled water that has flooded the market, the enormous strain on the environment, and the pollution due to used empty plastic bottles in the landfill area and will help to keep the city clean.

Browse every journal in the library or the library by type of article, or return to medical research.