Journal of Exposure Science & Environmental Epidemiology

Our medical research library holds 25 studies published in Journal of Exposure Science & Environmental Epidemiology (2006–2026). Each entry links to the study's record on PubMed and, where there is one, to the publisher's page and a free full text. 23 have an abstract, the authors' own summary as PubMed records it: open "Abstract" to read it.

About the journal

• Publisher: Nature Pub. Group
• Published: 2006 to the present, United States
• Language: English
• ISSN: 1559-0631 (print), 1559-064X (electronic)
• Continues: Journal of Exposure Analysis and Environmental Epidemiology
• Its record in the NLM Catalog

2020s

• Sociodemographic characteristics of populations living near industrial land disposals of known and suspected carcinogens across the United States. E. Sharp, C.N. Pruitt, J.A. Fisher, et al. 2026;36(5):910-918. PubMed · Publisher · Free full text

  Abstract

  Background: Industrial facilities dispose of millions of pounds of chemical waste in U.S.-based landfills, surface impoundments, and underground injection wells annually, but information on populations living in proximity to these releases is limited.

  Objective: We quantified on-site land disposals of known and suspected human carcinogens and evaluated population characteristics associated with disposals in the 50 U.S. states and Puerto Rico.

  Methods: We linked land releases of known and suspected carcinogenic chemicals from regulatory data (2010-2018) to 2010 census tract data overall and by region. We estimated odds ratios and 95% confidence intervals for associations of population characteristics with land releases of arsenic, asbestos, benzene, beryllium, cadmium, formaldehyde, nickel, polychlorinated biphenyls (PCBs), cobalt, lead, and styrene, comparing tracts with the highest releases ( > median or 4th quartile) to those with zero releases using population density-adjusted multinomial logistic regression models.

  Results: Known carcinogens with releases mostly to land included arsenic, asbestos, beryllium, cadmium, formaldehyde, nickel, and PCBs. Probable carcinogens included acrylamide, acrolein, cobalt, and hydrazine. Land disposal amounts were highest in the West and South. The tract proportion of Black population was associated with 8-31% higher odds of the highest land disposals of lead, cadmium, and formaldehyde. Increases in Hispanic and Latino population were associated with 29-33% higher odds of a tract having the highest disposals of benzene, asbestos, PCBs, and styrene. Measures of lower socioeconomic status were associated with the highest disposals, including 16-72% higher odds of tracts having the highest disposals per 10% increase in the proportion of families experiencing poverty.

  Significance: Our findings highlight differences between populations living in areas with industrial land disposals compared to areas without them. As most studies of industrial pollution focus on air exposure, this study illustrates the need to consider land disposals as potential sources of environmental exposure to known and suspected carcinogens.

  Impact: This evaluation showed that millions of pounds of carcinogenic chemicals and metals from industrial sources are disposed of on land annually across the U.S. Over 70% of industrial releases of asbestos, formaldehyde, polychlorinated biphenyls, and metals like beryllium, cadmium, and nickel occur as on-site land disposals to landfills, surface impoundments, and underground wells, with most occurring in the Southern and Western U.S. The highest volume disposals of these chemicals and metals occurred in census tracts with higher proportions of population with lower levels of educational attainment and family income and higher levels of poverty and unemployment.

  © 2026. This is a U.S. Government work and not under copyright protection in the US; foreign copyright protection may apply.

• Occupational exposure to asbestos in the steel industry (1972-2006). D.J. Paustenbach, M.E. Stevens, B.P. Tuttle, et al. 2024;34(3):465-495. Historical article · Review PubMed · Publisher · Free full text

  Abstract

  Background: Historically, the use of asbestos in steelmaking has been limited to a few applications. Due to its physical and chemical properties, asbestos was not necessary or suitable for most purposes in a steel mill. The few applications where asbestos were used (i.e., certain gaskets, brakes, protective cloth, refractory materials, insulation materials, and hot top products) were replaced by alternative materials as they became available.

  Objective: We discuss historical uses of asbestos in steel manufacturing and the associated airborne asbestos concentrations collected at sixteen U. S. Steel facilities between 1972 and 2006.

  Methods: A total of 495 personal airborne asbestos samples from the U. S. Steel industrial hygiene records were analyzed across four time periods corresponding to changes in the OSHA permissible exposure limit (PEL) for asbestos. 68% of the samples (n = 337) were considered representative of an employee's workday. The remaining samples (n = 158) represented task samples. Samples were grouped by facility, department, and job category within the four time periods.

  Results: The average fiber concentrations measured for each facility and department over time were below the contemporaneous OSHA PEL. The mean representative workday asbestos air concentration from 1972 and 1975 was 1.09 f/cc. The mean representative workday concentration decreased to 0.13 f/cc between 1976 and 1985, then decreased again to 0.02 f/cc between 1986 and 1993 and 0.03 f/cc between 1994 and 2006. For task samples, the mean air concentration from 1972 to 1975 was 3.29 f/cc. The mean task sample concentration decreased to 0.48 f/cc between 1976 and 1985, then decreased again to 0.01 f/cc between 1986 and 1993 and 0.03 f/cc between 1994 and 2006. Only eleven out of the 495 samples (2.2%), for both task and representative workday samples, were in exceedance of the contemporaneous PEL(as an 8-hour TWA), ten of which occurred prior to 1978. Eight of these eleven PEL exceeding samples were task samples. Of the remaining three representative workday samples, two had unknown sampling times.

  Impact: This paper presents an analysis of all the available personal sampling data for airborne asbestos across 16 facilities of the U. S. Steel Corporation between 1972 and 2006. This dataset has previously never been publicly shared or analyzed. It represents one of the more complete industrial hygiene datasets from a corporation to be presented in a scientific journal and, due to the similarities in the processes at each mill, it should reflect analogous exposures throughout the steelmaking industry in the United States. One of the benefits of presenting these data is that it also provides insight into where asbestos-containing materials (ACMs) were used in the steel making process. This is just one example of a large firm that released information that had previously remained in file cabinets for decades. We believe that another benefit of publishing this paper is that it may encourage the largest firms in industry to assemble and analyze their industrial hygiene data to benefit the occupational hygiene, medical, and epidemiology communities. This can support future epidemiology studies and improve the design of future industrial hygiene programs.

  © 2023. The Author(s).

• Estimated number of cancers attributable to occupational exposures in France in 2017: an update using a new method for improved estimates. C. Marant Micallef, H. Charvat, M.T. Houot, et al. 2023;33(1):125-131. PubMed · Publisher

  Abstract

  Background: Over the last 50 years, occupational exposure to carcinogenic agents has been widely regulated in France.

  Objective: Report population-attributable fraction (PAF) and number of attributable cancer cases linked to occupational exposure in France based on an updated method to estimate lifetime occupational exposure prevalence.

  Methods: Population-level prevalence of lifetime exposure to ten carcinogenic agents (asbestos, benzene, chromium VI, diesel engine exhaust, formaldehyde, nickel compounds, polycyclic aromatic hydrocarbons, silica dust, trichloroethylene, wood dust) and two occupational circumstances (painters and rubber industry workers) were estimated using the French Census linked with MATGÉNÉ job-exposure matrices and French occupational surveys. PAF and number of attributable cancer cases were calculated using the estimated prevalence, relative risks from systematic review and national estimates of cancer incidence in 2017.

  Results: The lifetime occupational exposure prevalences were much higher in men than in women ranging from 0.2% (workers in the rubber industry) to 10.2% in men (silica), and from 0.10% (benzene, PAH and workers in the rubber industry) to 5.7% in women (formaldehyde). In total, 4,818 cancer cases (men: 4,223; women: 595) were attributable to the ten studied carcinogens and two occupational circumstances, representing 5.2% of cases among the studied cancer sites (M: 7.0%; W: 1.9%). In both sexes, mesothelioma (M: 689 cases; W: 160) and lung cancer (M: 3,032; W: 308) were the largest cancer sites impacted by the studied occupational agents and circumstances.

  Significance: A moderate proportion of the cancer cases in France is linked to carcinogens in occupational settings. Our method provides more precise estimates of attributable cancer taking into account evolution of exposure to occupational agents by sex, age and time. This methodology can be easily replicated using cross-sectional occupational data to aid priority making and implementation of prevention strategies in the workplace.

  © 2021. The Author(s), under exclusive licence to Springer Nature America, Inc.

2010s

• Epidemiology: a foundation of environmental decision making. K.C.K. Deener, J.D. Sacks, E.F. Kirrane, et al. 2018;28(6):515-521. Review PubMed · Publisher

  Abstract

  Many epidemiologic studies are designed so they can be drawn upon to provide scientific evidence for evaluating hazards of environmental exposures, conducting quantitative assessments of risk, and informing decisions designed to reduce or eliminate harmful exposures. However, experimental animal studies are often relied upon for environmental and public health policy making despite the expanding body of observational epidemiologic studies that could inform the relationship between actual, as opposed to controlled, exposures and health effects. This paper provides historical examples of how epidemiology has informed decisions at the U.S. Environmental Protection Agency, discusses some challenges with using epidemiology to inform decision making, and highlights advances in the field that may help address these challenges and further the use of epidemiologic studies moving forward.

• A principal factor analysis to characterize agricultural exposures among Nebraska veterans. L. Weissenburger-Moser, J. Meza, F. Yu, et al. 2017;27(2):214-220. PubMed · Publisher · Free full text

  Abstract

  Agricultural workers are at an increased risk of developing chronic respiratory disorders. Accurate estimation of long-term agricultural exposures based on questionnaires has been used to improve the validity of epidemiologic investigations and subsequent evaluation of the association between agricultural exposures and chronic diseases. Our aim was to use principal factor analysis (PFA) to distill exposure data into essential variables characterizing long-term agricultural exposures. This is a cross-sectional study of veterans between the ages of 40 and 80 years and who worked on a farm for ≥2 years. Participant characteristics were: 98.1% were white males with a mean age 65±8 (SD) years and 39.8% had chronic obstructive pulmonary disease. The final model included four factors and explained 16.6% of the variance in the exposure data. Factor 1 was a heterogeneous factor; however, Factor 2 was exclusively composed of exposure to livestock such as hogs, dairy and poultry. Factor 3 included exposures from jobs on or off the farm such as wood dust, mineral dust, asbestos and spray paint. Crop exposure loaded exclusively in Factor 4 and included lifetime hours of exposure and maximum number of acres farmed in the participants' lifetime. The factors in the final model were interpretable and consistent with farming practices.

• Estimation of personal exposure to asbestos of brake repair workers. M.F. Cely-García, F.C. Curriero, M. Sánchez-Silva, et al. 2017;27(4):417-426. PubMed · Publisher

  Abstract

  Exposure assessments are key tools to conduct epidemiological studies. Since 2010, 28 riveters from 18 brake repair shops with different characteristics and workloads were sampled for asbestos exposure in Bogotá, Colombia. Short-term personal samples collected during manipulation activities of brake products, and personal samples collected during non-manipulation activities were used to calculate 103 8-h TWA PCM-equivalent personal asbestos concentrations. The aims of this study are to identify exposure determinant variables associated with the 8-h TWA personal asbestos concentrations among brake mechanics, and propose different models to estimate potential asbestos exposure of brake mechanics in an 8-h work-shift. Longitudinal-based multivariate linear regression models were used to determine the association between personal asbestos concentrations in a work-shift with different variables related to work tasks and workload of the mechanics, and some characteristics of the shops. Monte Carlo simulations were used to estimate the 8-h TWA PCM-Eq personal asbestos concentration in work-shifts that had manipulations of brake products or cleaning activities of the manipulation area, using the results of the sampling campaigns. The simulations proposed could be applied for both current and retrospective studies to determine personal asbestos exposures of brake mechanics, without the need of sampling campaigns or historical data of air asbestos concentrations.

• Mortality from asbestos-associated disease in Libby, Montana 1979-2011. S.L. Naik, M. Lewin, R. Young, et al. 2017;27(2):207-213. PubMed · Publisher · Free full text

  Abstract

  Research on asbestos exposure in Libby, MT, has focused on occupational exposure in vermiculite mining and processing, but less attention has been paid to asbestos-related mortality among community members without vermiculite mining occupational history. Our study reports on asbestos-related mortality in Libby over 33 years (1979-2011) while controlling for occupational exposure. We calculated sex-specific 33-year standardized mortality ratios (SMRs) for Libby residents who died from 1979 to 2011 with an asbestos-related cause of death. Decedent address at time of death was geocoded to confirm inclusion in the Libby County Division. We controlled for past W.R. Grace employment by including and then removing them from the SMR analysis. Six hundred and ninety-four decedents were identified as having at least one asbestos-related cause of death and residing in our study area boundary. Statistically significant (P<0.05) 33-year SMRs, both before and after controlling for W.R. Grace employment, were found for: male and female non-malignant respiratory diseases, female COPD, and asbestosis for both sexes combined. Eighty-five men and two women were matched to employment records. We observed elevated asbestos-related mortality rates among males and females. SMR results for asbestosis were high for both sexes, even after controlling for past W.R. Grace employment. These results suggest that the general population may be experiencing asbestos-related effects, not just former vermiculite workers. Additional research is needed to determine whether SMRs remain elevated after controlling for secondary exposure, such as living with vermiculite workers.

• Airborne asbestos take-home exposures during handling of chrysotile-contaminated clothing following simulated full shift workplace exposures. J. Sahmel, C.A. Barlow, S. Gaffney, et al. 2016;26(1):48-62. PubMed · Publisher

  Abstract

  The potential for para-occupational, domestic, or take-home exposures from asbestos-contaminated work clothing has been acknowledged for decades, but historically has not been quantitatively well characterized. A simulation study was performed to measure airborne chrysotile concentrations associated with laundering of contaminated clothing worn during a full shift work day. Work clothing fitted onto mannequins was exposed for 6.5 h to an airborne concentration of 11.4 f/cc (PCME) of chrysotile asbestos, and was subsequently handled and shaken. Mean 5-min and 15-min concentrations during active clothes handling and shake-out were 3.2 f/cc and 2.9 f/cc, respectively (PCME). Mean airborne PCME concentrations decreased by 55% 15 min after clothes handling ceased, and by 85% after 30 min. PCM concentrations during clothes handling were 11-47% greater than PCME concentrations. Consistent with previously published data, daily mean 8-h TWA airborne concentrations for clothes-handling activity were approximately 1.0% of workplace concentrations. Similarly, weekly 40-h TWAs for clothes handling were approximately 0.20% of workplace concentrations. Estimated take-home cumulative exposure estimates for weekly clothes handling over 25-year working durations were below 1 f/cc-year for handling work clothes contaminated in an occupational environment with full shift airborne chrysotile concentrations of up to 9 f/cc (8-h TWA).

• Size- and type-specific exposure assessment of an asbestos products factory in China. M.N. Courtice, D.W. Berman, E. Yano, et al. 2016;26(1):63-9. PubMed · Publisher

  Abstract

  This study describes fibre size and type-specific airborne asbestos exposures in an asbestos product factory. Forty-four membrane filter samples were analysed by scanning electron microscopy to determine the size distribution of asbestos fibres, by workshop. Fibre frequencies of bivariate (length by width) categories were calculated and differences between workshops were tested by analysis of variance. Data were recorded for 13,435 chrysotile and 1075 tremolite fibres. The proportions between size metrics traditionally measured and potentially biologically important size metrics were found to vary in this study from proportions reported in other cohort studies. One, common size distribution was generated for each asbestos type over the entire factory because statistically significant differences in frequency between workshops were not detected. This study provides new information on asbestos fibre size and type distributions in an asbestos factory. The extent to which biologically relevant fibre size indices were captured or overlooked between studies can potentially reconcile currently unexplained differences in asbestos-related disease (ARD) risk between cohorts. The fibre distributions presented here, when combined with similar data from other sites, will contribute to the development of quantitative models for predicting risk and our understanding of the effects of fibre characteristics in the development of ARD.

• Childhood exposure to Libby amphibole during outdoor activities. P.H. Ryan, G.K. LeMasters, J. Burkle, et al. 2015;25(1):4-11. PubMed · Publisher

  Abstract

  Residents of Libby, MT were exposed to amphibole asbestos through multiple environmental pathways. Previous exposure characterization has primarily relied on qualitative report of these exposure activities. The objectives of this study were to describe available data from the US EPA preremediation actions for Libby amphibole (LA) exposure in Libby, MT and develop an approach to characterize outdoor residential exposure to LA among children. Homes in Libby, MT included in the US EPA preremediation Contaminant Screening Survey (CSS) were categorized by the presence of interior and/or exterior visible vermiculite and concentrations of LA were measured in samples of dust and soil. Airborne exposure to LA while digging/gardening, raking, and mowing were estimated using US EPA activity-based sampling (ABS) results. Residential histories and frequency/duration of childhood activities were combined with ABS to demonstrate the approach for estimating potential exposure. A total of 3154 residential properties participated in the CSS and 44% of these had visible exterior vermiculite. Airborne concentrations of LA where there was visible vermiculite outdoors were 3-15 times higher during digging/gardening, raking, and mowing activities compared with homes without visible outdoor vermiculite. Digging and gardening activities represented the greatest contribution to estimated exposures and 73% of the participants reported this activity before the age of 6 years. This methodology demonstrated the use of historical preremediation data to estimate residential exposures of children for specific activities. Children younger than age 6 years may have been exposed to LA while digging/gardening, especially at homes where there is visible outdoor vermiculite. This approach may be extended to other activities and applied to the entire cohort to examine health outcomes.

• Influence of exposure assessment and parameterization on exposure response. Aspects of epidemiologic cohort analysis using the Libby Amphibole asbestos worker cohort. T.F. Bateson, L. Kopylev. 2015;25(1):12-7. PubMed · Publisher

  Abstract

  Recent meta-analyses of occupational epidemiology studies identified two important exposure data quality factors in predicting summary effect measures for asbestos-associated lung cancer mortality risk: sufficiency of job history data and percent coverage of work history by measured exposures. The objective was to evaluate different exposure parameterizations suggested in the asbestos literature using the Libby, MT asbestos worker cohort and to evaluate influences of exposure measurement error caused by historically estimated exposure data on lung cancer risks. Focusing on workers hired after 1959, when job histories were well-known and occupational exposures were predominantly based on measured exposures (85% coverage), we found that cumulative exposure alone, and with allowance of exponential decay, fit lung cancer mortality data similarly. Residence-time-weighted metrics did not fit well. Compared with previous analyses based on the whole cohort of Libby workers hired after 1935, when job histories were less well-known and exposures less frequently measured (47% coverage), our analyses based on higher quality exposure data yielded an effect size as much as 3.6 times higher. Future occupational cohort studies should continue to refine retrospective exposure assessment methods, consider multiple exposure metrics, and explore new methods of maintaining statistical power while minimizing exposure measurement error.

• Multiple pathway asbestos exposure assessment for a Superfund community. C.W. Noonan, K. Conway, E.L. Landguth, et al. 2015;25(1):18-25. PubMed · Publisher

  Abstract

  Libby, MT, USA, was the home to workers at a historical vermiculite mining facility and served as the processing and distribution center for this industrial product that was contaminated with amphibole asbestos. Several pathways of environmental asbestos exposure to the general population have been identified. The local clinic and health screening program collects data from participants on past occupational and environmental exposures to vermiculite and asbestos. Health studies among this population have demonstrated associations between amphibole exposure and health outcomes, but critical questions regarding the nature and level of exposure associated with specific outcomes remain unanswered. The objective of this study was to develop a comprehensive exposure assessment approach that integrates information on individuals' contact frequency with multiple exposure pathways. For 3031 participants, we describe cumulative exposure metrics for environmental exposures, occupational exposures, and residents' contact with carry-home asbestos from household workers. As expected, cumulative exposures for all three occupational categories were higher among men compared with women, and cumulative exposures for household contact and environmental pathways were higher among women. The comprehensive exposure assessment strategies will advance health studies and risk assessment approaches in this population with a complex history of both occupational and environmental asbestos exposure.

• Personal exposure to asbestos and respiratory health of heavy vehicle brake mechanics. M.F. Cely-García, C.A. Torres-Duque, M. Durán, et al. 2015;25(1):26-36. PubMed · Publisher

  Abstract

  Asbestos brake linings and blocks are currently used in heavy vehicle brake repair shops (BRSs) in Bogotá, Colombia. Some brake products are sold detached from their supports and without holes, requiring manipulation before installation. The aim of this study was to assess asbestos exposures and conduct a preliminary evaluation of respiratory health in workers of heavy vehicles in BRSs. To estimate asbestos exposures, personal and area samples were collected in two heavy vehicle BRSs. Each shop was sampled during six consecutive days for the entire work shift. Personal samples were collected on 10 workers including riveters, brake mechanics, and administrative staff. Among workers sampled, riveters had the highest phase contrast microscopy equivalent (PCME) asbestos concentrations, with 8-h time-weighted average (TWA) personal exposures ranging between 0.003 and 0.157 f/cm(3). Respiratory health evaluations were performed on the 10 workers sampled. Three workers (30%) had circumscribed pleural thickening (pleural plaques), with calcifications in two of them. This finding is strongly suggestive of asbestos exposure. The results of this study provide preliminary evidence that workers in heavy vehicle BRSs could be at excessive risk of developing asbestos-related diseases.

• Exposure assessment for a cohort of workers at a former uranium processing facility. J.L. Anderson, R.D. Daniels, D.A. Fleming, et al. 2012;22(4):324-30. PubMed · Publisher

  Abstract

  Exposure was assessed for a cohort of 6409 workers at a former uranium processing facility as part of a mortality study. Workers at the facility had potential for exposure to a wide variety of radiological and chemical agents including uranium, thorium, radon, external ionizing radiation, acid mists, asbestos, and various solvents. Organ dose from internal exposure to uranium was assessed, along with dose from external ionizing radiation and exposure to radon. Qualitative assessment of exposure to thorium, acid mists, asbestos, coal dust, welding fumes, and other chemicals was also performed. Mean cumulative organ dose from internal uranium exposure ranged from 1.1 mGy (lung) to 6.7 μGy (pancreas). Mean cumulative external ionizing radiation dose was 13.4 mGy. Mean cumulative radon exposure was 26 working level months (WLMs). The chemical agents to which the largest numbers of study subjects were exposed were acid mists, machining fluids, and a tributyl phosphate/kerosene mixture used in the refining process.

• Impacts of land use on spatial distribution of mortality rates of cancers caused by naturally occurring asbestos. B. Wei, X. Jia, B. Ye, et al. 2012;22(5):516-21. PubMed · Publisher

  Abstract

  This study investigated the spatial distributions of mortality rates of six cancers: mesothelioma, lung cancer, intestinal cancer, nasopharyngeal and laryngeal cancer, liver cancer, and stomach cancer in Dayao using Geographic Information Systems. Relationships between the mortality rates of the six cancers and land use patterns were investigated by Pearson Correlation Coefficients. The results indicated that the mortality rates of nasopharyngeal and laryngeal cancer, lung cancer, intestinal cancer, and mesothelioma were significantly associated with outcropped asbestos. Both the proportions of farmland and urban area were positively related to the mortality rates of nasopharyngeal and laryngeal cancer, lung cancer, intestinal cancer, and mesothelioma, and significant negative correlations were found between the proportion of forestland and nasopharyngeal and laryngeal cancer and intestinal cancer. It can be concluded that naturally occurring asbestos may significantly elevate the mortality rates of nasopharyngeal and laryngeal cancer, intestinal cancer, lung cancer, and mesothelioma. Moreover, higher proportions of farmland, urban area, and lower proportions of forested land may elevate the mortality rate of the four cancers.

• Localized pleural thickening: smoking and exposure to Libby vermiculite. K.Y. Christensen, L. Kopylev. 2012;22(4):320-3. PubMed · Publisher

  Abstract

  There is limited research on the combined effects of smoking and asbestos exposure on risk of localized pleural thickening (LPT). This analysis uses data from the Marysville cohort of workers occupationally exposed to Libby amphibole asbestos (LAA). Workers were interviewed to obtain work and health history, including ever/never smoking and chest X-rays. Cumulative exposure estimates were developed on the basis of fiber measurements from the plant and work history. Benchmark concentration (BMC) methodology was used to evaluate the exposure-response relationship for exposure to LAA and a 10% increased risk of LPT, considering potential confounders and statistical model forms. There were 12 LPT cases among 118 workers in the selected study population. The mean exposure was 0.42 (SD=0.77) fibers/cc-year, and the prevalence of smoking history was 75.0% among cases and 51.9% among non-cases. When controlling for LAA exposure, smoking history was of borderline statistical significance (P-value=0.099), and its inclusion improved model fit, as measured by Akaike's Information Criterion. A comparison of BMC estimates was made to gauge the potential effect of smoking status. The BMC was 0.36 fibers/cc-year, overall. The BMC for non-smokers was approximately three times as high (1.02 fibers/cc-year) as that for the full cohort, whereas the BMC for smokers was about 1/2 that of the full cohort (0.17 fibers/cc-year).

• Exposure science will not increase protection of workers from asbestos-caused diseases: NIOSH fails to provide needed public health action and leadership. R.A. Lemen, H. Anderson, J.C. Bailar, et al. 2011;21(1):114-5; author reply 116. Letter · Comment PubMed · Publisher

• Modeling community asbestos exposure near a vermiculite processing facility: Impact of human activities on cumulative exposure. J.L. Adgate, S.J. Cho, B.H. Alexander, et al. 2011;21(5):529-35. PubMed · Publisher

  Abstract

  Contaminated vermiculite ore from Libby, Montana was processed in northeast Minneapolis from 1936 to 1989 in a densely populated urban residential neighborhood, resulting in non-occupational exposure scenarios from plant stack and fugitive emissions as well as from activity-based scenarios associated with use of the waste rock in the surrounding community. The objective of this analysis was to estimate potential cumulative asbestos exposure for all non-occupationally exposed members of this community. Questionnaire data from a neighborhood-exposure assessment ascertained frequency of potential contact with vermiculite processing waste. Monte Carlo simulation was used to develop exposure estimates based on activity-based concentration estimates and contact durations for four scenarios: S1, moved asbestos-contaminated waste; S2, used waste at home, on lawn or garden; S3, installed/removed vermiculite insulation; S4, played in or around waste piles at the plant. The simulation outputs were combined with air-dispersion model results to provide total cumulative asbestos exposure estimates for the cohort. Fiber emissions from the plant were the largest source of exposure for the majority of the cohort, with geometric mean cumulative exposures of 0.02 fibers/cc × month. The addition of S1, S2 and S3 did not significantly increase total cumulative exposure above background exposure estimates obtained from dispersion modeling. Activity-based exposures were a substantial contributor to the upper end of the exposure distribution: 90th percentile S4 exposure estimates are ∼10 times higher than exposures from plant emissions. Pile playing is the strongest source of asbestos exposure in this cohort, with other activity scenarios contributing less than from plant emissions.

  In plain English

  This modeling study estimated non-work asbestos exposure near a northeast Minneapolis plant that processed contaminated vermiculite ore from Libby, Montana, from 1936 to 1989. The researchers selected 2222 members of a Minnesota Department of Health cohort who never worked at the plant, never lived with a plant worker, and were first at risk of exposure before 1981. Using air dispersion modeling and residential histories, they estimated background exposure from plant emissions for 2146 of them; 76 had invalid addresses. They estimated exposure from four questionnaire-reported activities using Monte Carlo computer simulation and air measurements from Libby: moving plant waste, using waste at home, installing or removing vermiculite insulation, and playing on waste piles at the plant. Typical (geometric mean) background exposure was about 0.02 fibers/cc-months. At the 90th percentile, exposure from pile playing was 9.6 times higher than background. Adding the other three activities to background did not significantly change total exposure. The authors concluded that use of waste rock likely added substantial exposure for a large subgroup. They noted uncertainties likely of an order of magnitude or more.

  We wrote this plain-English summary from the full article with the help of AI, and a second AI model checked each sentence against the article. It is not the authors' wording; the abstract and the article are their own account.

• Assessment of cancer risks due to environmental exposure to asbestos. H.A. Driece, S. Siesling, P.H. Swuste, et al. 2010;20(5):478-85. PubMed · Publisher

  Abstract

  In a rural area widespread pollution of friable and non-friable waste products was present, used to harden dirt tracks, yards, and driveways during 1935-1974. Exposure to environmental asbestos was assessed by a site approach, based on number of polluted sites within postal code areas, and by a household approach, based on number of households in the close vicinity to polluted sites within postal code areas. Based on asbestos soil investigations, 293 sites were identified with asbestos waste material at the surface, of which 77% contained crocidolite fibres as well as chrysotile fibres. The 293 sites-at-risk varied from 5 m(2) to 2722 m(2) and were surrounded by 347 households within 100 m of these sites. Distance to the plant was associated with the number of sites (r=0.36), and with the number of households (r=0.52). However, categorization of postal code areas into low, intermediate or high likelihood of exposure to asbestos showed a modest agreement between the site and household approach. In the site approach a total of 2.3 million person-years at risk were estimated with an average exposure of 1674 fibres/m(3) and an expected 1.8 cases of malignant mesothelioma each year. The household approach resulted in estimates of 1.2 million person-years at risk, and 0.9 cases of malignant mesothelioma per year, respectively. This study illustrates that asbestos waste on the surface of roads and yards in an area with over 130,000 inhabitants may result in long-term exposure to asbestos that will cause several cases of malignant mesothelioma each year. Although distance to plant, number of polluted sites and number of exposed household were associated, the modest agreement among these measures of exposure indicate that the exposure assessment strategy chosen in a particular study may result in considerable misclassification. Without detailed information on individual behaviour within the polluted area, it is difficult to show that a more individually oriented approach will perform better than an ecological approach.

• Exposure science can increase protection of workers and their families from exposure to asbestos and inform on the effects of other elongate mineral particles. J. Howard, P. Middendorf. 2010;20(6):485-6. PubMed · Publisher

2000s

• An evaluation of short-term exposures of brake mechanics to asbestos during automotive and truck brake cleaning and machining activities. R.O. Richter, B.L. Finley, D.J. Paustenbach, et al. 2009;19(5):458-74. PubMed · Publisher

  Abstract

  Historically, the greatest contributions to airborne asbestos concentrations during brake repair work were likely due to specific, short-duration, dust-generating activities. In this paper, the available short-term asbestos air sampling data for mechanics collected during the cleaning and machining of vehicle brakes are evaluated to determine their impact on both short-term and daily exposures. The high degree of variability and lack of transparency for most of the short-term samples limit their use in reconstructing past asbestos exposures for brake mechanics. However, the data are useful in evaluating how reducing short-term, dust-generating activities reduced long-term exposures, especially for auto brake mechanics. Using the short-term dose data for grinding brake linings from these same studies, in combination with existing time-weighted average (TWA) data collected in decades after grinding was commonplace in rebuilding brake shoes, an average 8-h TWA of approximately 0.10 f/cc was estimated for auto brake mechanics that performed arc grinding of linings during automobile brake repair (in the 1960s or earlier). In the 1970s and early 1980s, a decline in machining activities led to a decrease in the 8-h TWA to approximately 0.063 f/cc. Improved cleaning methods in the late 1980s further reduced the 8-h TWA for most brake mechanics to about 0.0021 f/cc. It is noteworthy that when compared with the original OSHA excursion level, only 15 of the more than 300 short-term concentrations for brake mechanics measured during the 1970s and 1980s possibly exceeded the standard. Considering exposure duration, none of the short-term exposures were above the current OSHA excursion level.

• Summary of the development of a signature for detection of residual dust from collapse of the World Trade Center buildings. H.A. Lowers, G.P. Meeker, P.J. Lioy, et al. 2009;19(3):325-35. PubMed · Publisher · Free full text

  Abstract

  The collapse of the World Trade Center (WTC) towers on September 11, 2001, caused lower Manhattan and adjacent areas to be covered in millimeters to centimeters of dust. WTC dust penetrated into indoor spaces, and public health concerns remain regarding exposure to possible residual dust in the affected areas. The goal of the studies outlined in this review was to determine which, if any, components of the bulk WTC dust are sufficiently above typical background dust levels in New York City to develop an analytical method to screen for the component(s). Components of the <150-microm-size fraction of the dust are gypsum, phases compatible with crushed concrete, man-made vitreous fibers (MMVFs), silica, lead, chrysotile asbestos, and other materials. Slag wool was the most common WTC MMVF, whereas soda-lime glass and rock wool were minor to trace constituents. Most background samples also contained gypsum, phases compatible with concrete, and MMVF. However, the proportions of the various MMVF in background samples are typically unlike those characteristic of bulk WTC dust. Results indicate that slag wool can be used as a signature marker to identify areas that contain potential residual WTC dust contamination at concentrations that are less than average background levels for the material.

• Using environmental forensic microscopy in exposure science. J.R. Millette, R.S. Brown, W.B. Hill. 2008;18(1):20-30. PubMed · Publisher

  Abstract

  Environmental forensic microscopy investigations are based on the methods and procedures developed in the fields of criminal forensics, industrial hygiene and environmental monitoring. Using a variety of microscopes and techniques, the environmental forensic scientist attempts to reconstruct the sources and the extent of exposure based on the physical evidence left behind after particles are exchanged between an individual and the environments he or she passes through. This article describes how environmental forensic microscopy uses procedures developed for environmental monitoring, criminal forensics and industrial hygiene investigations. It provides key references to the interdisciplinary approach used in microscopic investigations. Case studies dealing with lead, asbestos, glass fibers and other particulate contaminants are used to illustrate how environmental forensic microscopy can be very useful in the initial stages of a variety of environmental exposure characterization efforts to eliminate some agents of concern and to narrow the field of possible sources of exposure.

• Cumulative asbestos exposure for US automobile mechanics involved in brake repair (circa 1950s-2000). B.L. Finley, R.O. Richter, F.S. Mowat, et al. 2007;17(7):644-55. Historical article PubMed · Publisher

  Abstract

  We analyzed cumulative lifetime exposure to chrysotile asbestos experienced by brake mechanics in the US during the period 1950-2000. Using Monte Carlo methods, cumulative exposures were calculated using the distribution of 8-h time-weighted average exposure concentrations for brake mechanics and the distribution of job tenure data for automobile mechanics. The median estimated cumulative exposures for these mechanics, as predicted by three probabilistic models, ranged from 0.16 to 0.41 fibers per cubic centimeter (f/cm(3)) year for facilities with no dust-control procedures (1970s), and from 0.010 to 0.012 f/cm(3) year for those employing engineering controls (1980s). Upper-bound (95%) estimates for the 1970s and 1980s were 1.96 to 2.79 and 0.07-0.10 f/cm(3) year, respectively. These estimates for US brake mechanics are consistent with, but generally slightly lower than, those reported for European mechanics. The values are all substantially lower than the cumulative exposure of 4.5 f/cm(3) year associated with occupational exposure to 0.1 f/cm(3) of asbestos for 45 years that is currently permitted under the current occupational exposure limits in the US. Cumulative exposures were usually about 100- to 1,000-fold less than those of other occupational groups with asbestos exposure for similar time periods. The cumulative lifetime exposure estimates presented here, combined with the negative epidemiology data for brake mechanics, could be used to refine the risk assessments for chrysotile-exposed populations.

• Chrysotile asbestos exposure associated with removal of automobile exhaust systems (ca. 1945-1975) by mechanics: results of a simulation study. D.J. Paustenbach, A.K. Madl, E. Donovan, et al. 2006;16(2):156-71. PubMed · Publisher

  Abstract

  For decades, asbestos-containing gaskets were used in virtually every system that involved the transport of fluids or gases. Prior to the mid-1970s, some automobile exhaust systems contained asbestos gaskets either at flanges along the exhaust pipes or at the exhaust manifolds of the engine. A limited number of automobile mufflers were lined with asbestos paper. This paper describes a simulation study that characterized personal and bystander exposures to asbestos during the removal of automobile exhaust systems (ca. 1945-1975) containing asbestos gaskets. A total of 16 pre-1974 vehicles with old or original exhaust systems were studied. Of the 16 vehicles, 12 contained asbestos gaskets in the exhaust system and two vehicles had asbestos lining inside the muffler. A total of 82 samples (23 personal, 38 bystander, and 21 indoor background) were analyzed by Phase Contrast Microscopy (PCM) and 88 samples (25 personal, 41 bystander, and 22 indoor background) by Transmission Electron Microscopy (TEM). Only seven of 25 worker samples analyzed by TEM detected asbestos fibers and 18 were below the analytical sensitivity limit (mean 0.013 f/cc, range 0.001-0.074 f/cc). Applying the ratio of asbestos fibers:total fibers (including non-asbestos) as determined by TEM to the PCM results showed an average (1 h) adjusted PCM worker exposure of 0.018 f/cc (0.002-0.04 f/cc). The average (1 h) adjusted PCM airborne concentration for bystanders was 0.008 f/cc (range 0.0008-0.015 f/cc). Assuming a mechanic can replace four automobile single exhaust systems in 1 workday, the estimated 8-h time-weighted average (TWA) for a mechanic performing this work was 0.01 f/cc. Under a scenario where a mechanic might repeatedly conduct exhaust work, these results suggest that exposures to asbestos from work with automobile exhaust systems during the 1950s through the 1970s containing asbestos gaskets were substantially below 0.1 f/cc, the current PEL for chrysotile asbestos, and quite often were not detectable.

Browse every journal in the library or the library by type of article, or return to medical research.