No fee unless we recover compensation for your family Text size 833-4-ASBESTOS (833-427-2378) Free Case Review

Rollboard (GAF)

Rollboard was an asbestos paper product from The Ruberoid Co. and GAF, made of plies of asbestos paper bonded together without glue.1,2 In its 1989 filing with the U.S. Environmental Protection Agency under the Asbestos Information Act, made for itself and The Ruberoid Co., GAF said it came in thicknesses from 1/16 to 1/8 of an inch and had a temperature limit of 250 degrees F.2 A 1990 EPA notice that published what GAF reported gives the same description and limit.1

The notice dates GAF's asbestos paper and millboard products as a group: produced by Ruberoid from 1928 to 1967, by General Aniline & Film Corporation in 1967, and by GAF Corporation from 1968 to 1981.1 The 1989 filing lists rollboard formulas from about December 1938, for a regular 1/8" commercial rollboard, and from 1970 and 1971 to 1977.2

See also Millboard and Asbestos Paper.

You don't need the product names or old records. No fee unless we recover compensation for your family.

Call 833-4-ASBESTOS Request a review

Asbestos claims

If you or a family member worked with or around Rollboard (GAF) and later developed mesothelioma or another asbestos disease, a claim may be paid by the G-I Holdings (GAF) asbestos trust. Free case review.

The formulas

The 4 formulas documents give for Rollboard (GAF), each with its ingredients and amounts exactly as printed. Amounts are by weight unless the document says otherwise; a total that doesn't come to 100 is the document's own.

E-507 Rollboard · 1970

Also known as 1/16" Rollboard; .062 - .066 Ply machine.

Constituent Amount
chrysotile 91.0%
bleached sulphite 3.1%
Celite 4.1%
starch .8%
burtonite .4%
borax .2%
blackshielda .3%

a. GAF knows nothing about this constituent except its name as shown.

Derived in the same manner as the asbestos paper formulas from 1960-1981: averages of Beater Furnish Reports and Commodity Specification and Cost Sheets, with a plus or minus range (p. 22).

Source: GAF Asbestos Information Act Submission (1989), p. 222

E-507 Rollboard · 1971-77

Also known as 1/16" Rollboard; .062 - .066 Ply machine.

Constituent Amount
chrysotile 90.0 ± 2.0%
bleached sulphite 4.1 ± 1.0%
Celite 4.0 ± 1.0%
starch 1.0 ± 1.0%
burtonite Traces not exceeding .5%

Derived in the same manner as the asbestos paper formulas from 1960-1981: averages of Beater Furnish Reports and Commodity Specification and Cost Sheets, with a plus or minus range (p. 22).

Source: GAF Asbestos Information Act Submission (1989), p. 222

Rollboard - Regular 1/8" Commercial Rollboard · Circa 12/19/38

“The following formula for rollboard was derived from a single document dated December 19, 1938.”

Constituent Amount
chrysotile 92.3 %
tapioca 1.7 %
enzymes 29.5 cc - Trace

Derived from a single document dated December 19, 1938 (p. 22).

Source: GAF Asbestos Information Act Submission (1989), p. 232

plying adhesive for 3- and 4-Ply Rollboard (not an asbestos furnish)

“This Rollboard was made by plying two or more sheets of .035 - .038 asbestos paper, 36-3/4% wide, on the plying machine in the Millboard Department. Silicate of Soda was used in plying the 2-ply 1/16" Rollboard. Rye Flour was used in plying the 3- and 4-Ply Rollboard using the following formula:”

Constituent Amount
Rye Flour 28 Lbs.
Water 30 Gals.
Silicate of Soda 1 Gal.
Pearl Starch 7 Lbs.

Derived from a single document dated December 19, 1938 (p. 22).

Source: GAF Asbestos Information Act Submission (1989), p. 232

What each document says

Every statement about Rollboard (GAF) in the documents, in each document's own words.

Asbestos; Publication of Identifying Information (1990)

  • Made from: “produced by Ruberoid from 1928 to 1967 ... and by GAF Corporation from 1968 to 1981”, said by GAF Building Materials Corporation, as recorded by U.S. EPA, Federal Register 55 FR (Feb. 13, 1990), p. 81
  • Made until: “produced by Ruberoid from 1928 to 1967 ... and by GAF Corporation from 1968 to 1981”, said by GAF Building Materials Corporation, as recorded by U.S. EPA, Federal Register 55 FR (Feb. 13, 1990), p. 81
  • Description: “an asbestos paper product, consisting of plies of asbestos paper bonded together without glue”, said by GAF Building Materials Corporation, as recorded by U.S. EPA, Federal Register 55 FR (Feb. 13, 1990), p. 81
  • Temperature limit: “a temperature limit of 250 °F”, said by GAF Building Materials Corporation, as recorded by U.S. EPA, Federal Register 55 FR (Feb. 13, 1990), p. 81

GAF Asbestos Information Act Submission (1989)

  • Temperature limit: “a temperature limit of 250 degrees F”, p. 222
  • Description: “plies of asbestos paper bonded together without glue to create thicknesses varying from 1/16 to 1/8 of an inch”, p. 222

Kind of product

We list Rollboard (GAF) with paper, felt and millboard, from how the documents describe it. That page explains how such products exposed workers.

See also

  • GAF: the company's history, documents, people, products and plants
  • GAF on our products page: what the documents say about the company's asbestos products, with sources

References

  1. Asbestos; Publication of Identifying Information (February 13, 1990), p. 8.
  2. GAF Asbestos Information Act Submission (October 6, 1989), pp. 22–23.

Cite this page

“Rollboard (GAF).” AsbestosClaims.Law Library. https://asbestosclaims.law/library/products/gaf-rollboard.

ACL Doc numbers and their short links never change. See how to cite the Library.

Talk with an asbestos lawyer

Start with what you remember, and we'll take it from there.

This page is provided for general informational purposes and does not constitute legal advice. Every asbestos case turns on its own facts, exposure history, diagnosis, deadlines, available evidence, and applicable law. Reviewing this page does not create an attorney-client relationship. For advice about your specific situation, call 833-4-ASBESTOS for a free case review.