Journal of Hazardous Materials

Our medical research library holds 73 studies published in Journal of Hazardous Materials (2000–2024). Each entry links to the study's record on PubMed and, where there is one, to the publisher's page and a free full text. 73 have an abstract, the authors' own summary as PubMed records it: open "Abstract" to read it.

About the journal

• Publisher: Elsevier
• Published: 1975 to the present, Netherlands
• Language: English
• ISSN: 0304-3894 (print), 1873-3336 (electronic)
• Its record in the NLM Catalog

2020s

• An AI based smart-phone system for asbestos identification. M. Rolfe, S. Hayes, M. Smith, et al. 2024;463:132853. PubMed · Publisher

  Abstract

  Asbestos identification is a complex environmental and economic challenge. Typical commercial identification of asbestos involves sending samples to a laboratory where someone learned in the field uses light microscopy and specialized mounting to identify the morphologically distinct signatures of Asbestos. In this work we investigate the use of a portable (30x) microscope which works with a smart phone camera to develop an image recognition system. 7328 images from over 1000 distinct samples of cement sheet from Melbourne, Australia were used to train a phone-based image recognition system for Asbestos identification. Three common CNN's were tested ResNet101, InceptionV3 and VGG_16 with ResNet101 achieving the best result. The distinctiveness of Asbestos was found to be identified correctly 90% of the time using a phone-based system and no specialized mounting. The image recognition system was trained with ResNet101 a convolutional neural network deep learning model which weights layers with a residual function. Resulting in an accuracy of 98.46% and loss of 3.8% ResNet101 was found to produce a more accurate model for this use-case than other deep learning neural networks.

  Copyright © 2023. Published by Elsevier B.V.

• Classification of asbestos and their nonasbestiform analogues using FTIR and multivariate data analysis. T. Lee, S.E. Mischler, C. Wolfe. 2024;469:133874. PubMed · Publisher · Free full text

  Abstract

  This study presents a possible application of Fourier transform infrared (FTIR) spectrometry and multivariate data analysis, principal component analysis (PCA), and partial least squares-discriminant analysis (PLS-DA) for classifying asbestos and their nonasbestiform analogues. The objectives of the study are: 1) to classify six regulated asbestos types and 2) to classify between asbestos types and their nonasbestiform analogues. The respirable fraction of six regulated asbestos types and their nonasbestiform analogues were prepared in potassium bromide pellets and collected on polyvinyl chloride membrane filters for FTIR measurement. Both PCA and PLS-DA classified asbestos types and their nonasbestiform analogues on the score plots showed a very distinct clustering of samples between the serpentine (chrysotile) and amphibole groups. The PLS-DA model provided ∼95% correct prediction with a single asbestos type in the sample, although it did not provide all correct predictions for all the challenge samples due to their inherent complexity and the limited sample number. Further studies are necessary for a better prediction level in real samples and standardization of sampling and analysis procedures.

  Published by Elsevier B.V.

• Determination of asbestos cement rooftop surface composition using regression analysis and hyper-spectral reflectance data in the visible and near-infrared ranges. M. Sabat, N. Fares, G. Mitri, et al. 2024;469:134006. PubMed · Publisher

  Abstract

  The effects of asbestos on human health have spurred numerous studies examining its risks in urban environments. Recent works have shifted towards less-invasive techniques for remote detection and classification of asbestos-cement. In this context, this study combines visible (VIS) and near-infrared (NIR) reflectance data collected in-situ with reference signals from the USGS spectral library, utilizing optimized regression analysis to determine the surface composition of corrugated asbestos-cement rooftops. An outlier filter was successfully implemented to enhance the accuracy of regression calculations, achieving a high level of agreement with actual field observations. The regression analysis revealed varying proportions of weathered cement, hazardous asbestos fibers (specifically chrysotile and cummingtonite), and biological growth (such as lichens and moss). These results are consistent with previous research on the composition of asbestos-cement rooftops, including a comparable field study and XRD analysis conducted in 2019. This underscores the importance of using regression analysis, preceded by an outlier filtering step, on VIS and NIR reflectance data to ascertain the surface composition of asbestos-cement rooftops. This methodology holds potential for application to larger hyperspectral datasets across more extensive sample surfaces and areas.

  Copyright © 2024 Elsevier B.V. All rights reserved.

• Investigating the deposition of fibrous zeolite particles on leaf surfaces: A novel low-cost method for detecting the presence of airborne hazardous mineral fibers. W.W. Fan, A.F. Gualtieri, K.N. Dirks, et al. 2024;480:135982. PubMed · Publisher

  Abstract

  Naturally occurring fibrous minerals, such as erionite, can pose a significant threat to human health when disturbed and subsequently respired. Understanding the spatial abundance and characteristics of these hazardous fibrous minerals in ambient air is crucial for minimizing human exposure and assessing risk. Conventional detection methods for airborne hazardous mineral fibers, such as those developed for asbestos, are of limited utility in environmental settings where fiber concentrations are low and different fiber types may be present and can be costly especially when monitoring large areas over long periods of time. This study presents an innovative methodology for detecting and identifying the presence of airborne naturally occurring fibrous zeolites, using leaf surface deposition sampling, SEM-EDX analysis for the detection and assessment of elemental composition, and TEM-SAED with continuous rotation diffraction (MicroED) to determine their crystallographic unit cell parameters. In total, 309 fibrous zeolite particles (FZPs) were identified on a range of tree leaf surfaces across 80 % of the sampling sites located close to both active and disused zeolite quarries in the Taupo Volcanic Region, New Zealand. The FZPs displayed various morphologies including aggregates, bundles, and fibril-like structures. Of the FZPs detected, 92.2 % were < 5 µm in length. Tetrahedral Si:(Si+Al) ratio results indicated that 40 % of the FZPs were in the reference range for zeolite mordenite. TEM-SAED plus MicroED analysis resulted in 61 % of tested FZPs indexed to unit cell parameters that matched with mordenite. This research demonstrates the potential of leaf sampling as a cost-effective method for detecting airborne FZPs while the MicroED data can be utilized for distinguishing between different types of airborne fibrous zeolites in ambient air.

  Copyright © 2024 The Authors. Published by Elsevier B.V. All rights reserved.

• Iron nuclearity in mineral fibres: Unravelling the catalytic activity for predictive modelling of toxicity. A.F. Gualtieri, M. Cocchi, F. Muniz-Miranda, et al. 2024;469:134004. PubMed · Publisher

  Abstract

  Chronic inflammation induced in vivo by mineral fibres, such as asbestos, is sustained by the cyclic formation of cytotoxic/genotoxic oxidant species that are catalysed by iron. High catalytic activity is observed when iron atoms are isolated in the crystal lattice (nuclearity=1), whereas the catalytic activity is expected to be reduced or null when iron forms clusters of higher nuclearity. This study presents a novel approach for systematically measuring iron nuclearity across a large range of iron-containing standards and mineral fibres of social and economic importance, and for quantitatively assessing the relation between nuclearity and toxicity. The multivariate curve resolution (MCR) empirical approach and density functional theory (DFT) calculations were applied to the analysis of UV-Vis spectra to obtain information on the nature of iron and nuclearity. This approach led to the determination of the nuclearity of selected mineral fibres which was subsequently used to calculate a toxicity-related index. High nuclearity-related toxicity was estimated for chrysotile samples, fibrous glaucophane, asbestos tremolite, and fibrous wollastonite. Intermediate values of toxicity, corresponding to a mean nuclearity of 2, were assigned to actinolite asbestos, amosite, and crocidolite. Finally, a low nuclearity-related toxicity parameter, corresponding to an iron-cluster with a lower catalytic power to produce oxidants, was assigned to asbestos anthophyllite.

  Copyright © 2024 The Authors. Published by Elsevier B.V. All rights reserved.

• Leaching and geochemical modeling of asbestos-cement waste and mine asbestos. V. Soultanidis, E.A. Voudrias. 2024;480:135988. PubMed · Publisher

  Abstract

  Asbestos-Containing Materials (ACMs) were widely used in the construction sector but, due to their harmful health effects, many countries have banned their use. ACMs are classified as hazardous and, in contact with water, produce potentially harmful leachates. The objective of this work was to determine the leaching behavior of 20 elements from two asbestos-cement materials and mine asbestos samples across the entire pH range and varying liquid-to-solid ratios (column tests). The pH-dependence tests showed consistent leaching patterns across the three materials. Geochemical speciation model (LeachXS) predictions were successful in most cases of the batch experiments and were improved by adjusting iron oxides concentration for some elements. Model predictions were successful for fewer elements in the column experiments. Depending on the pH, element release was controlled by respective solid phase dissolution, sorption onto iron oxides and substitution in ettringite. Some leaching concentrations exceeded the EU limits for granular non-hazardous waste landfills. Considering the strongly alkaline nature of monolithic asbestos-cement waste undergoing carbonation, we propose all three materials to be disposed of in non-hazardous waste landfills, according to EU legislation. A case study concluded that geochemical modeling of ACMs leaching is a useful tool in estimating element release under various environmental conditions.

  Copyright © 2024 Elsevier B.V. All rights reserved.

• Deep learning for asbestos counting. A. Rabiee, G. Della Ventura, F. Mirzapour, et al. 2023;455:131590. PubMed · Publisher

  Abstract

  The PCM (phase contrast microscopy) method for asbestos counting needs special sample treatments, hence it is time consuming and rather expensive. As an alternative, we implemented a deep learning procedure on images directly acquired from the untreated airborne samples using standard Mixed Cellulose Ester (MCE) filters. Several samples with a mix of chrysotile and crocidolite with different concentration loads have been prepared. Using a 20x objective lens coupled with a backlight illumination system a number of 140 images were collected from these samples, which along with additional 13 highly fibre loaded artificial images constituted the database. About 7500 fibres were manually recognised and annotated following the National Institute for Occupational Safety and Health (NIOSH) fibre counting Method 7400 as input for the training and validation of the model. The best trained model provides a total precision of 0.84 with F1-Score of 0.77 at a confidence of 0.64. A further post-detection refinement to ignore detected fibres < 5 µm in length improves the final precision. This method can be considered as a reliable and competent alternative to conventional PCM.

  Copyright © 2023 Elsevier B.V. All rights reserved.

• From field analysis to nanostructural investigation: A multidisciplinary approach to describe natural occurrence of asbestos in view of hazard assessment. J.R. Petriglieri, L. Barale, C. Viti, et al. 2023;457:131754. PubMed · Publisher

  Abstract

  The environmental impact of natural occurrences of asbestos (NOA) and asbestos-like minerals is a growing concern for environmental protection agencies. The lack of shared sampling and analytical procedures hinders effectively addressing this issue. To investigate the hazard posed by NOA, a multidisciplinary approach that encompasses geology, mineralogy, chemistry, and toxicology is proposed and demonstrated here, on a natural occurrence of antigorite from a site in Varenna Valley, Italy. Antigorite is, together with chrysotile asbestos, one of the serpentine polymorphs and its toxicological profile is still under debate. We described field and petrographic analyses required to sample a vein and to evaluate the NOA-hazard. A combination of standardized mechanical stress and automated morphometrical analyses on milled samples allowed to quantify the asbestos-like morphology. The low congruent solubility in acidic simulated body fluid, together with the toxicity-relevant surface reactivity due to iron speciation, signalled a bio-activity similar or even greater to that of chrysotile. Structural information on the genetic mechanism of antigorite asbestos-like fibres in nature were provided. Overall, the NOA site was reported to contain veins of asbestos-like antigorite and should be regarded as source of potentially toxic fibres during hazard assessment procedure.

  Copyright © 2023 The Authors. Published by Elsevier B.V. All rights reserved.

• Journey to the centre of the lung. The perspective of a mineralogist on the carcinogenic effects of mineral fibres in the lungs. A.F. Gualtieri. 2023;442:130077. Review PubMed · Publisher

  Abstract

  This work reviews the bio-chemical mechanisms leading to adverse effects produced when mineral fibres are inhaled and transported in the lungs from the perspective of a mineralogist. The behaviour of three known carcinogenic mineral fibres (crocidolite, chrysotile, and fibrous-asbestiform erionite) during their journey through the upper respiratory tract, the deep respiratory tract and the pleural cavity is discussed. These three fibres have been selected as they are the most socially and economically relevant mineral fibres representative of the classes of chain silicates (amphiboles), layer silicates (serpentine), and framework silicates (zeolites), respectively. Comparison of the behaviour of these fibres is made according to their specific crystal-chemical assemblages and properties. Known biological and subsequent pathologic effects which lead and contribute to carcinogenesis are critically reviewed under the mineralogical perspective and in relation to recent progress in this multidisciplinary field of research. Special attention is given to the understanding of the cause-effect relationships for lung cancer and malignant mesothelioma. Comparison with interstitial pulmonary fibrosis, or "asbestosis", will also be made here. This overview highlights open issues, data gaps, and conflicts in the literature for these topics, especially as regards relative potencies of the three mineral fibres under consideration for lung cancer and mesothelioma. Finally, an attempt is made to identify future research lines suitable for a general comprehensive model of the carcinogenicity of mineral fibres.

  Copyright © 2022 The Author. Published by Elsevier B.V. All rights reserved.

• Mobility of crocidolite asbestos in sandy porous media mimicking aquifer systems. L. Magherini, C. Avataneo, S. Capella, et al. 2023;458:131998. PubMed · Publisher

  Abstract

  Asbestos is widely recognized as being a carcinogen when dispersed in air, but very little is known about its exposure pathways in water and its subsequent effects on human health. Several studies have proved asbestos presence in groundwater but failed to assess its mobility in aquifer systems. This paper aims to fill this gap by studying the transport of crocidolite, an amphibole asbestos, through sandy porous media mimicking different aquifer systems. To this purpose, two sets of column test were performed varying the crocidolite suspension concentration, the quartz sand grain size distribution, and the physicochemical water parameters (i.e., pH). The results proved that crocidolite is mobile in quartz sand due to the repulsive interactions between fibres and porous media. The concentration of fibres at the outlet of the column were found to decrease when decreasing the grain size distribution of the porous medium, with a bigger impact on highly concentrated suspensions. In particular, 5-to-10-µm-long fibres were able to flow through all the tested sands while fibres longer than 10 µm were mobile only through the coarser medium. These results confirm that groundwater migration should be considered a potential exposure pathway while implementing human health risk assessment.

  Copyright © 2023 The Authors. Published by Elsevier B.V. All rights reserved.

• Air pollution: A culprit of lung cancer. Y. Xue, L. Wang, Y. Zhang, et al. 2022;434:128937. Review PubMed · Publisher

  Abstract

  Air pollution is a global health problem, especially in the context of rapid economic development and the expansion of urbanization. Herein, we discuss the harmful effects of outdoor and indoor pollution on the lungs. Ambient particulate matters (PMs) from industrial and vehicle exhausts is associated with lung cancer. Workers exposed to asbestos, polycyclic aromatic hydrocarbons (PAHs), and toxic metals are also likely to develop lung cancer. Indoors, cooking fumes, second-hand smoke, and radioactive products from house decoration materials play roles in the development of lung cancer. Bacteria and viruses can also be detrimental to health and are important risk factors in lung inflammation and cancer. Specific effects of lung cancer caused by air pollution are discussed in detail, including inflammation, DNA damage, and epigenetic regulation. In addition, advanced materials for personal protection, as well as the current government policies to prevent air pollution, are summarized. This review provides a basis for future research on the relationship between lung cancer and air pollution.

  Copyright © 2022 Elsevier B.V. All rights reserved.

• Asbestos in soil and water: A review of analytical techniques and methods. S. Malinconico, F. Paglietti, S. Serranti, et al. 2022;436:129083. Review PubMed · Publisher

  Abstract

  In this review the main standard and novel analytical techniques and methods for sampling, sample preparation, detection and quantification of asbestos in soil and water are described, compared and discussed in terms of advantages and limitations. An overview of common analytical methods applied for identification and quantification of airborne asbestos is preliminary provided, as they have been widely studied, due to the well-known human pathologies related to fibers inhalation. Despite the presence of asbestos in soil and water may also constitute a health risk, it has been less investigated and regulated. For these environmental matrices, the methods adopted at international and national scale, covering the whole analytical process, from sampling to management of data, are reported in depth, highlighting their limitations like sensitivity, reliability and reproducibility. Finally, different promising novel/unconventional methods, that may substitute or support traditional ones for asbestos detection both in environmental and anthropic matrices, are presented and critically evaluated.

  Copyright © 2022 Elsevier B.V. All rights reserved.

• Assessment of asbestos contamination in soils at rehabilitated and abandoned mine sites, Limpopo Province, South Africa. G.G. Freemantle, D. Chetty, M. Olifant, et al. 2022;429:127588. PubMed · Publisher

  Abstract

  Prior to its termination, asbestos mining in South Africa was centred on the large crocidolite fields of the present day Northern Cape, the amosite (grunerite)-crocidolite fields of Limpopo, and chrysotile fields of Mpumalanga provinces. The legacy of these activities continues to affect surrounding communities in contemporary South Africa. The asbestos fields of Limpopo host two important former mining areas at Penge and at the Bewaarkloof near Chuenespoort. A large abandoned site is located southeast of Penge at Weltevreden, where there is no evidence of any rehabilitation. Two former mines, Lagerdraai and Uitkyk, are rehabilitated sites in an extensive string of closed mines that operated in the southern Bewaarkloof. Samples from the abandoned and rehabilitated mine sites were studied using semi-quantitative X-ray powder diffraction (XRD) to determine asbestos contamination levels in soils, and to assess distribution patterns of asbestos mineral species in the surrounding soils. Only where below detection (typically 1-3 mass%) from XRD, samples were assessed optically. The Weltevreden site, with no observable rehabilitation efforts, contrasts with the rehabilitated sites at Lagerdraai and Uitkyk. The predominant asbestiform mineral species at each site were successfully identified, with underlying geological asbestos mineral distribution trends recognised in the soils at the Bewaarkloof. Trace amounts of asbestiform minerals were identified in soils downstream of the Weltevreden mine, as well as in surrounding hillsides. The results indicate that XRD is a potentially useful tool for benchmarking sites yet to be rehabilitated as well as monitoring the effectiveness of previous rehabilitation efforts. The method is also a suitable first-pass for target areas that may require more detailed, time-consuming, and costly analysis.

  Copyright © 2022. Published by Elsevier B.V.

• Chrysotile asbestos migration in air from contaminated water: An experimental simulation. C. Avataneo, J.R. Petriglieri, S. Capella, et al. 2022;424(Pt C):127528. PubMed · Publisher

  Abstract

  In Naturally Occurring Asbestos (NOA) rich areas, water flows through asbestos bearing rocks and soils and generates waterborne fibres that may migrate in air and become a risk for humans. Research on the migration and dispersion after water vaporisation has been so far only marginally evaluated. This study investigates the migration in air of asbestos from a set of suspensions contaminated by chrysotile from Balangero (Italy), under controlled laboratory conditions. We evaluated i) the morphological modifications that might occur to chrysotile during migration from water to air, and ii) the amount of airborne chrysotile mobilised from standardised suspensions. Morphological alteration of asbestos fibres occurred during water-air migration and impacted on the analytical response of electron microscopy. Waterborne asbestos concentration higher than 40 ∙ 106 f/L generates in air concentration higher than 1 fibre per litre [f/L], the alarm threshold limit set by World Health Organization for airborne asbestos. A possible correlation between the waterborne fibre concentration as mass or number of fibres per volume unit [μg/L or f/L] was observed.

  Copyright © 2021 The Authors. Published by Elsevier B.V. All rights reserved.

• Comparison of bacterial communities and their functional profiling using 16S rRNA gene sequencing between the inherent serpentine-associated sites, hyper-accumulator, downgradient agricultural farmlands, and distal non-serpentine soils. V. Nagarajan, H.C. Tsai, J.S. Chen, et al. 2022;431:128557. PubMed · Publisher

  Abstract

  This study aims to determine and compare the bacterial community and functional profiles associated with serpentine sites, innate hyper-accumulating weed, downgradient agricultural farmlands and non-serpentine sites using 16S rRNA gene sequencing. Elemental analysis revealed that the serpentine rock and weathered soil have higher magnesium, nickel, chromium, magnesium/calcium and lower calcium/magnesium ratios and agricultural farmlands have recorded elevated chromium. Proteobacteria were found predominant, except the non-serpentine site which was rich in Cyanobacteria. PCA analysis at the genus level indicates the uniqueness of different experimental groups, except the hyperaccumulators which exhibited relatively less dissimilarity. The shift analysis showed the serpentine sites were characterized by the abundance of bacteria having heavy metal effluxion. The hyper-accumulating weeds were higher in plant growth-promoting bacteria expressing tolerance against heavy metals toxicity such as nickel, chromium, cobalt and arsenic. Besides, the agricultural lands were abundant in wetland-associated methanogens and metal (manganese, iron and zinc) transporting function related bacteria. The results suggest that the inherent edaphic factors including heavy metal content, the interacting behavior of hyperaccumulator's rhizosphere microbiota with soil and anthropogenic activities such as agricultural practices could be a major determinant of the variation in the bacterial community selection and abundance in the respective study sites.

  Copyright © 2022 Elsevier B.V. All rights reserved.

• From properties to toxicity: Comparing microplastics to other airborne microparticles. S. Wieland, A. Balmes, J. Bender, et al. 2022;428:128151. Review PubMed · Publisher

  Abstract

  Microplastic (MP) debris is considered as a potentially hazardous material. It is omnipresent in our environment, and evidence that MP is also abundant in the atmosphere is increasing. Consequently, the inhalation of these particles is a significant exposure route to humans. Concerns about potential effects of airborne MP on human health are rising. However, currently, there are not enough studies on the putative toxicity of airborne MP to adequately assess its impact on human health. Therefore, we examined potential drivers of airborne MP toxicity. Physicochemical properties like size, shape, ζ-potential, adsorbed molecules and pathogens, and the MP's bio-persistence have been proposed as possible drivers of MP toxicity. Since their role in MP toxicity is largely unknown, we reviewed the literature on toxicologically well-studied non-plastic airborne microparticles (asbestos, silica, soot, wood, cotton, hay). We aimed to link the observed health effects and toxicology of these microparticles to the abovementioned properties. By comparing this information with studies on the effects of airborne MP, we analyzed possible mechanisms of airborne MP toxicity. Thus, we provide a basis for a mechanistic understanding of airborne MP toxicity. This may enable the assessment of risks associated with airborne MP pollution, facilitating effective policymaking and product design.

  Copyright © 2022 The Authors. Published by Elsevier B.V. All rights reserved.

• Mechanochemically incorporating magnesium sulfate into antigorite to provide active nucleation sites for efficient precipitation of cadmium ions from weak acidic solution. M. Chen, Q. Zhang, L. Jiang, et al. 2022;424(Pt A):127272. PubMed · Publisher

  Abstract

  Utilization of natural clay minerals for the treatment of heavy metal cadmium contamination is appealing as the affordable and readily accessible raw materials. However, the low reactivity of natural serpentine limits its practical application for Cd removal. In the present study, mechanochemical activation of antigorite-type serpentine (SP) as example was introduced to enhance its removal capacity for heavy metal of cadmium high enough for practical use. It was found ball-milling at 600 rpm for 60 min for antigorite resulted in the increased release of hydroxyl group to facilitate the precipitation of Cd2+, giving a capacity of 27.4 mg/g for the treatment of 100 mg/L Cd2+ for 120 min at room temperature, which was 10 times higher than that of the pristine antigorite (2.5 mg/g). More significantly, magnesium sulfate (MgSO4, MS) was introduced for the first time to process antigorite, thus to form MgSO4-incorporated antigorite. As a result, the removal capacity for Cd2+ was dramatically increased to 239.7 mg/g with the equal antigorite dosage (the molar ratio of SP/MS = 1:0.5), which is also much higher than the other reported clay minerals. Results showed that, MgSO4 incorporation promoted the reactivity of antigorite and provided numerous SO42- active sites, which allowed the heterogeneous nucleation of basic cadmium sulfate (CdSO4·3.5 Cd(OH)2·xH2O) precipitate on antigorite, therefore not requiring high alkalinity support as the conventional formation of cadmium hydroxide does. Correspondingly, under the new mechanism, the Cd precipitation could take place in a wide pH range, even from pH 3.0, which was a rarely reported phenomenon happening on natural minerals. Based on these findings, this study demonstrated the effectiveness of mechanochemical incorporation of sulfate for enhancing the Cd2+ removal capacity of serpentine, as well as the high efficiency of new pathway for Cd2+ precipitation. Moreover, the potential of low-cost serpentine as alternative stabilizers for the highly-effective remediation of heavy metal contamination may be expected.

  Copyright © 2021 Elsevier B.V. All rights reserved.

• Soil-pH and cement influence the weathering kinetics of chrysotile asbestos in soils and its hydroxyl radical yield. M. Walter, G. Geroldinger, L. Gille, et al. 2022;431:128068. PubMed · Publisher

  Abstract

  Chrysotile asbestos is a toxic and carcinogenic mineral that has been used in a variety of industrial and consumer applications. Much of the fiber- and cement-containing asbestos waste has ended up in terrestrial environments. Chrysotile weathering in soils and the potential for natural attenuation have, however, hardly been examined yet. Here we explored how soil properties influence the dissolution rate of chrysotile, the release of the carcinogenic metals chromium and nickel, and the hydroxyl radical (HO•) generation by chrysotile fibers. Chrysotile dissolution rates in soil suspensions decreased with increasing soil-pH and were lower than reported rates in soil-free systems. Dissolved organic carbon did not markedly accelerate dissolution at circumneutral pH, whereas cement mixed with soil inhibited dissolution because of its alkalinity. The HO•-yield of incubated fibers in non-amended soils eventually decreased by 60-75%. The decline was fastest in an acidic podzol soil, yet was followed by a small rebound. Cement amendment induced the largest HO•-yield reduction (∼90%), presumably due to surface coating of the fibers. Overall, this work demonstrates that the potential for natural attenuation of chrysotile asbestos in soils critically depends on soil chemical parameters and the presence of cement in association with the fibers.

  Copyright © 2022 The Authors. Published by Elsevier B.V. All rights reserved.

• Biodeterioration of asbestos cement by siderophore-producing Pseudomonas. S.R. David, A. Jaouen, D. Ihiawakrim, et al. 2021;403:123699. PubMed · Publisher

  Abstract

  Since the ban on the use of asbestos due to its carcinogenic properties, the removal of asbestos cement, representing the major asbestos-containing waste, has proven to be a challenge in most industrial countries. Asbestos-containing products are mainly disposed of in landfills and have remained untreated. Bioremediation involving bacteria previously reported the ability of Pseudomonas aeruginosa to release iron from flocking asbestos waste through a siderophore-driven mechanism. We examined the involvement of siderophore-producing Pseudomonas in the biodeterioration of asbestos cement. Iron and magnesium solubilization were evaluated by specific siderophore-producing mutants. The absence of one of the two siderophores affected iron extraction, whereas equivalent dissolution as that of the control was observed in the absence of siderophore. Both pyoverdine and pyochelin biosynthesis was repressed in the presence of asbestos cement, suggesting iron bioavailability from the waste. We compared the efficiency of various pyoverdines to scavenge iron from asbestos cement waste that revealed the efficiency of all pyoverdines. Pyoverdines were efficient in iron removal extracted continuously, with no evident extraction limit, in long-term weathering experiments with these pyoverdines. The optimization of pyoverdine-asbestos weathering may allow the development of a bioremediation process to avoid the disposal of such waste in landfills.

  Copyright © 2020 Elsevier B.V. All rights reserved.

• From hazardous asbestos containing wastes (ACW) to new secondary raw material through a new sustainable inertization process: A multimethodological mineralogical study. N.M. Marian, G. Giorgetti, C. Magrini, et al. 2021;413:125419. PubMed · Publisher

  Abstract

  Nowadays, asbestos-containing wastes (ACW) still represent an important environmental problem and a severe health hazard due to the well known pulmonary diseases derived from asbestos fibers inhalation. Except for a very few cases, ACW are currently confined in controlled landfills, giving rise to increasingly high amounts of still hazardous wastes. A promising alternative to landfill confinement is represented by ACW inertization, but the high cost of the inertization processes so far proposed by the scientific community have hampered the creation of actually operative plants. In this paper, we explore the possibility to use an innovative process that ensures the obtainment of asbestos-free inert material in an exceptionally short processing time, thus greatly reducing cost-related problems. The efficacy of the inertization process has been verified through accurate mineralogical investigations on both chrysotile and crocidolite de-activated fibers, through X-ray diffraction, scanning and transmission electron microscopy. Overall mineralogical, microstructural and granulometric characteristics of the inert bulk material suggest that it could be successfully re-used as a secondary raw material in ceramic industries. This innovative inertization procedure could therefore provide an effective and economically sustainable solution for ACW management.

  Copyright © 2021 Elsevier B.V. All rights reserved.

• In situ spectroscopic identification of the six types of asbestos. V. Zholobenko, F. Rutten, A. Zholobenko, et al. 2021;403:123951. PubMed · Publisher

  Abstract

  Exposure to asbestos fibres is related to a number of severe lung diseases, and therefore, rapid, accurate and reliable in situ or on-site asbestos detection in real-life samples is of considerable importance. This work presents a comprehensive investigation of all six types of asbestos by mid-infrared ATR-FTIR, NIR spectroscopy and Raman microspectroscopy. Our studies demonstrate that for practical applications, NIR spectroscopy is potentially the most powerful method for asbestos identification in materials utilised by the construction industry. By focusing on the narrow spectral region, 7300-7000 cm-1 (~1370-1430 nm, overtones of O‒H vibrations), which is highly specific to these materials, and optimising the sensitivity and resolution of the instrumentation, we have been able to discriminate and identify each of the six types of asbestos with the level of detection significantly better than 1 wt%. Furthermore, straightforward computational analysis has allowed for automated objective evaluation of the spectroscopic data.

  Copyright © 2020 Elsevier B.V. All rights reserved.

• Risk assessment of asbestos containing materials in a deteriorated dwelling area using four different methods. Y.L. Zhang, H.S. Byeon, W.H. Hong, et al. 2021;410:124645. PubMed · Publisher

  Abstract

  The release of asbestos fibers in old buildings, during demolition, or remodeling is associated with severe public health risks to building occupants and workers. In Korea, asbestos was used in several building materials during the 20th century. Although the use of asbestos is currently banned, its widespread earlier use and the current government initiatives to revitalize dilapidated areas make it essential to accurately evaluate the location and status of asbestos-containing materials (ACMs). This study surveyed buildings in an area of deteriorated dwellings targeted for renewal and determined the status and distribution of ACMs in that area. Asbestos distribution maps were generated and asbestos characteristics were analyzed. In addition, the risk posed by the identified ACMs was assessed using four international methods (the Korean Ministry of Environment, US Environmental Protection Agency, American Society for Testing and Materials, and UK Health and Safety Executive methods), and the results were compared. Notable differences between the assessment results were identified and were found to reflect the specific characteristics of buildings in the study area. These findings suggest ACM risk assessments should be specifically tailored to the regions in which they are applied, thereby improving ACM management and promoting both worker and occupant health.

  Copyright © 2020 Elsevier B.V. All rights reserved.

• Distinct autophagy-apoptosis related pathways activated by Multi-walled (NM 400) and Single-walled carbon nanotubes (NIST-SRM2483) in human bronchial epithelial (16HBE14o-) cells. M. Ghosh, S. Murugadoss, L. Janssen, et al. 2020;387:121691. PubMed · Publisher

  Abstract

  Given the recent development in the field of particle and fibre toxicology, parallels have been drawn between Carbon nanotubes (CNTs) and asbestos. It is now established that both multi-walled (MWCNTs) and single-walled (SWCNTs) carbon nanotubes might contribute to pulmonary disease. Although multiple mechanisms might be involved in CNT induced pathogenesis, systematic understanding of the relationship between different CNT exposure (MWCNT vs SWCNT) and autophagy/ apoptosis/ necrosis, in human lung epithelial cells remains limited. In this study, we demonstrate that exposure to MWCNT (NM-400), but not SWCNT (NIST-SRM2483), leads to an autophagic response after acute exposure (24 h). MWCNT exposure was characterized by an increase in anti-apoptotic BCL2, downregulation of executor Caspase-3/7 and increase in expression of genes from the autophagy machinery. For SWCNT exposure however, we observed an overexpression of executor Caspase-3/7 and upregulation of pro-apoptotic BAX; enrichment for processes like cornification, apoptotic process, cell differentiation from proteomic analysis. These results clearly indicate a major difference in the pathways initiated by the CNTs, in vitro. While the present study design provides mechanistic understanding after an acute exposure for the tested CNTs, we believe that the information obtained here would have relevance in better understanding of CNT toxicity and pathogenesis in general.

  Copyright © 2019 Elsevier B.V. All rights reserved.

• Efficiency of pyoverdines in iron removal from flocking asbestos waste: An innovative bacterial bioremediation strategy. S.R. David, D. Ihiawakrim, R. Regis, et al. 2020;394:122532. PubMed · Publisher

  Abstract

  The use of asbestos-containing products has been banned in many countries since the beginning of the 80's due to its carcinogenic properties. However, asbestos is widely present in private and public buildings, resulting in the need to process a vast amount of asbestos-containing waste. Among the current technologies for the destruction of asbestos fibers, biodegradation by fungi, lichens, and, more recently, bacteria has been described. We previously reported the involvement of the bacterial siderophore pyoverdine in the release of iron from the two asbestos groups, serpentines and amphiboles. Among the large diversity encountered in the pyoverdine family, we examined whether these siderophores can alter flocking asbestos waste as well. All the tested pyoverdines were efficient in chrysotile-gypsum and amosite-gypsum weathering, although some exhibited higher iron dissolution. Iron was solubilized by pyoverdines from Pseudomonas aeruginosa and mandelii in a time-dependent manner from chrysotile-gypsum within 24 h. Renewal of pyoverdine-containing supernatant every 24 or 96 h allowed iron removal from chrysotile-gypsum at each cycle, until a limit was reached after 42 days of total incubation. Moreover, the dissolution was concentration-dependent, as demonstrated for the pyoverdine of P. mandelii. Pyoverdine-asbestos weathering could therefore become an innovative method to reduce anthropogenic waste.

  Copyright © 2020. Published by Elsevier B.V.

• Iron removal from raw asbestos by siderophores-producing Pseudomonas. S.R. David, D. Ihiawakrim, R. Regis, et al. 2020;385:121563. PubMed · Publisher

  Abstract

  Asbestos, mineral present in soil, are highly toxic due to the presence of iron. Microbes-mineral interactions occur naturally through various processes leading to their alteration. We examined the effect of siderophore-producing Pseudomonas with a particular focus on the role of pyoverdine and pyochelin on raw asbestos fibers such as amosite, crocidolite and chrysotile. We compared the efficiency of pyoverdine to the iron chelating agent EDTA in the release of iron from raw asbestos fibers. Pyoverdine was able to extract iron from all the tested raw asbestos with the higher efficiency observed for chrysotile and crocidolite. When asbestos were grinded, the iron removal was more important for all types. We monitored the effect of bacterial growth and siderophores containing bacterial supernatant on raw asbestos dissolution by solution chemistry analysis and transmission electron microscopy. The siderophore-containing supernatant allowed a higher iron solubilisation than the one obtained after bacterial growth. Moreover, the iron dissolution was faster with pyoverdine-containing supernatant than pyochelin-containing supernatant, with approximately the same iron level for the maximum extraction with a delay of 48 h. Our study clearly showed the involvement of bacterial siderophores, pyoverdine and pyochelin on chrysotile, crocidolite and amosite fibers weathering.

  Copyright © 2019 Elsevier B.V. All rights reserved.

• Thermal inertization of amphibole asbestos modulates Fe topochemistry and surface reactivity. A. Pacella, M. Tomatis, C. Viti, et al. 2020;398:123119. PubMed · Publisher

  Abstract

  This study discloses the morphological and chemical-structural modifications that occur during thermal degradation of amphibole asbestos. Low-iron tremolite and iron-rich crocidolite were heated at temperatures ranging from r.t. to 1200 °C. Heating promoted a complex sequence of iron oxidation, migration and/or clustering and, finally, the formation of brittle fibrous pseudomorphs consisting of newly formed minerals and amorphous nanophases. The effects of the thermal modifications on toxicologically relevant asbestos reactivity were evaluated by quantifying carbon- and oxygen-centred, namely hydroxyl (OH), radicals. Heating did not alter carbon radicals, but largely affected oxygen-centred radical yields. At low temperature, reactivity of both amphiboles decreased. At 1200 °C, tremolite structural breakdown was achieved and the reactivity was further reduced by migration of reactive iron ions into the more stable TO4 tetrahedra of the newly formed pyroxene(s). Differently, crocidolite breakdown at 1000 °C induced the formation of hematite, Fe-rich pyroxene, cristobalite, and abundant amorphous material and restored radical reactivity. Our finding suggests that thermally treated asbestos and its breakdown products still share some toxicologically relevant properties with pristine fibre. Asbestos inertization studies should consider morphology and surface reactivity, beyond crystallinity, when proving that a thermally inactivated asbestos-containing material is safe.

  Copyright © 2020 Elsevier B.V. All rights reserved.

2010s

• Coupling SEM-EDS and confocal Raman-in-SEM imaging: A new method for identification and 3D morphology of asbestos-like fibers in a mineral matrix. G. Wille, D. Lahondere, U. Schmidt, et al. 2019;374:447-458. PubMed · Publisher

  Abstract

  Asbestos consists in natural minerals crystallized in a specific habit and possessing in particular properties. In the case of Naturally Occurring Asbestos, usual methods applied to the identification of mineral fibers and the determination of their possible asbestiform nature seems not efficient, especially in the case of mineral fibers included in mineral matrix. We present a new in-situ method based on the use of confocal Raman-in-SEM imaging implemented in a Scanning Electron Microscope as an efficient method for in-situ mineralogy. The limitation of conventional methods is discussed. We applied 2D-Raman imaging to the identification of sub-micrometric fibers included in different mineral matrix. We were able to identify actinolite fibers down to 400 nm in diameter, included in feldspar, quartz and/or calcite matrix. Moreover, Confocal Raman allows the collection of 3D data that would provide access to critical information on the morphology of the amphibole fibers in the volume, such as aspect ratio, fibers distribution and amphibole volume fraction. We performed this method on various examples of rocks containing actinolite fibers of mean structural formula is: Na0,04-0,12 Mg2,79-3,73 Al0,29-0,58 K0,01 Ca1,79-1,98 Mn0,01-0,09 Fe2+0,99-1,91 Fe3+Si7,64-7,73 O22(OH)2. We demonstrated that coupling confocal Raman imaging and SEM is a new and efficient in-situ method for identification and morphological characterization of amphibole fibers.

  Copyright © 2019 Elsevier B.V. All rights reserved.

• Sustainable bio-hydrothermal sequencing treatment for asbestos-cement wastes. D. Spasiano, V. Luongo, M. Race, et al. 2019;364:256-263. PubMed · Publisher

  Abstract

  In this paper, the treatment of asbestos-cement waste (ACW) has been attempted by a dark fermentation (DF) pre-treatment followed by hydrothermal and anaerobic digestion (AD) treatments. During DF, glucose, employed as a biodegradable substrate, was mainly converted to H2-rich biogas and organic acids (OAs). The latter caused the dissolution of the cement matrix and the partial structural collapse of chrysotile (white asbestos). To complete the chrysotile degradation, hydrothermal treatment of the DF effluents was performed under varying operating conditions (temperature, acid type, and load). After the addition of 5.0 g/L sulfuric acid, a temperature decrease, from 80 °C to 40 °C, slowed down the treatment. Similarly, at 100 °C, a decrease of sulfuric, lactic or malic acid load from 5.0 g/L to 1.0 g/L slowed down the process, regardless of acid type. The acid type did not affect the hydrothermal treatment but influenced the AD of the hydrothermal effluents. Indeed, when malic acid was used, the AD of the hydrothermally treated effluents resulted in the highest production of methane. At the end of the AD treatment, some magnesium ions derived from ACW dissolution participated in the crystallization of struvite, an ecofriendly phosphorous-based fertilizer.

  Copyright © 2018 Elsevier B.V. All rights reserved.

• Asbestos containing materials detection and classification by the use of hyperspectral imaging. G. Bonifazi, G. Capobianco, S. Serranti. 2018;344:981-993. PubMed · Publisher

  Abstract

  In this work, hyperspectral imaging in the short wave infrared range (SWIR: 1000-2500nm) coupled with chemometric techniques was evaluated as an analytical tool to detect and classify different asbestos minerals, such as amosite ((Fe2+)2(Fe2+,Mg)5Si8O22(OH)2)), crocidolite (Na2(Mg,Fe)6Si8O22(OH)2) and chrysotile (Mg3(Si2O5)(OH)4), contained in cement matrices. Principal Component Analysis (PCA) was used for data exploration and Soft Independent Modeling of Class Analogies (SIMCA) for sample classification. The classification model was built using spectral characteristics of reference asbestos samples and then applied to the asbestos containing materials. Results showed that identification and classification of amosite, crocidolite and chrysotile was obtained based on their different spectral signatures, mainly related to absorptions detected in the hydroxyl combination bands, such as Mg-OH (2300nm) and Fe-OH (from 2280 to 2343nm). The developed SIMCA model showed very good specificity and sensitivity values (from 0.89 to 1.00). The correctness of classification results was confirmed by stereomicroscopic investigations, based on different color, morphological and morphometrical characteristics of asbestos minerals, and by micro X-ray fluorescence maps, through iron (Fe) and magnesium (Mg) distribution assessment on asbestos fibers. The developed innovative approach could represent an important step forward to detect asbestos in building materials and demolition waste.

  Copyright © 2017 Elsevier B.V. All rights reserved.

• Assessment of the potential hazard represented by natural raw materials containing mineral fibres-The case of the feldspar from Orani, Sardinia (Italy). A.F. Gualtieri, N.B. Gandolfi, S. Pollastri, et al. 2018;350:76-87. PubMed · Publisher

  Abstract

  This work describes the nature of the potentially hazardous fibrous amphibole found in the Orani's feldspar mine (Sardinia, Italy). To identify its nature, a protocol of analysis including morphometric, chemical and crystallographic characterizations was applied. Thanks to this approach, it was possible to classify the observed fibres as tremolite after comparing chemical data, SEM/TEM observations, FTIR/ Raman spectra and X-ray diffraction data with those reported for a standard sample. The unit cell parameters of the investigated tremolite phase are a = 9.82(1) Å, b = 18.08(3) Å, c = 5.27(1) Å, and the angle β corresponds to 104.4(1)°. The mean concentration of asbestos tremolite in the Orani's feldspar is 0.28 wt%. Most of the fibres (0.26 wt%) are respirable 'regulated' fibres, representing a potential hazard. Because the total amount of tremolite in the sample is 0.6 wt%, a large fraction of it has a crystal habit other than fibrous-asbestiform or acicular. The obtained results allowed us to suggest possible solutions for a safe exploitation and mineral processing of the Orani's mine. The procedure proposed herein may be a general tool suitable to identify the mineralogical nature of fibrous minerals in raw materials and assess if they may represent a potential health/environmental hazard.

  Copyright © 2018 Elsevier B.V. All rights reserved.

• Dark fermentation process as pretreatment for a sustainable denaturation of asbestos containing wastes. D. Spasiano. 2018;349:45-50. PubMed · Publisher

  Abstract

  A cement asbestos compound (CAC) sample was detoxified by a treatment train based on a dark fermentation (DF) process followed by a hydrothermal phase, which led to the complete degradation of the chrysotile fibers. During the biological pretreatment, the glucose was converted in biogas rich in H2 and volatile fatty acids (VFA). The latter caused the dissolution of all the Ca-based compounds and the solubilisation of 50% brucite-like layers of chrysotile fibers contained in the CAC suspended in the bioreactor (5 g/L). XRD analysis of the solids contained in the effluents of the DF process highlighted the disappearance of the chrysotile fiber peaks. However, a complete destruction of all the asbestos fibers is hard to prove and a hydrothermal treatment was carried out to dissolve the "brucite" layers still present in solution. Due to the presence of the VFA produced during the DF, a complete destruction of chrysotile fibers was achieved by a 24 h hydrothermal process performed with a [H2SO4]/[CAC] ratio 50% lower than that adopted in a previous finding. Consequently, the DF pre-treatment can contribute to lower the H2SO4 and the energy consumption of a CAC hydrothermal treatment, due to the production of VFA and H2.

  Copyright © 2018 Elsevier B.V. All rights reserved.

• Siderophore-mediated iron removal from chrysotile: Implications for asbestos toxicity reduction and bioremediation. S.K. Mohanty, C. Gonneau, A. Salamatipour, et al. 2018;341:290-296. PubMed · Publisher · Free full text

  Abstract

  Asbestos fibers are highly toxic (Group 1 carcinogen) due to their high aspect ratio, durability, and the presence of iron. In nature, plants, fungi, and microorganisms release exudates, which can alter the physical and chemical properties of soil minerals including asbestos minerals. We examined whether exudates from bacteria and fungi at environmentally relevant concentrations can alter chrysotile, the most widely used asbestos mineral, and lower its toxicity. We monitored the release of iron from chrysotile in the presence of organic acid ligands and iron-specific siderophores derived from bacteria and fungi and measured any change in fiber toxicity toward peritoneal macrophages harvested from mice. Both fungal and bacterial siderophores increased the removal of iron from asbestos fibers. In contrast, organic acid ligands at environmentally relevant concentrations neither released iron from fibers nor helped in siderophore-mediated iron removal. Removal of plant-available or exchangeable iron did not diminish iron dissolution by both types of siderophores, which indicates that siderophores can effectively remove structural iron from chrysotile fibers. Removal of iron by siderophore lowered the fiber toxicity; fungal siderophore appears to be more effective than bacterial siderophore in lowering the toxicity. These results indicate that prolonged exposure to siderophores, not organic acids, in the soil environment decreases asbestos fiber toxicity and possibly lowers the health risks. Thus, bioremediation should be explored as a viable strategy to manage asbestos-contaminated sites such as Brownfield sites, which are currently left untreated despite dangers to surrounding communities.

  Copyright © 2017 Elsevier B.V. All rights reserved.

• Magnesium oxide production from chrysotile asbestos detoxification with oxalic acid treatment. A. Valouma, A. Verganelaki, I. Tetoros, et al. 2017;336:93-100. PubMed · Publisher

  Abstract

  This article describes the detoxification of pure chrysotile (Chr) asbestos by following an acid leaching treatment with oxalic acid dihydrate (Oxac) (H2C2O4·2H2O). Oxac was chosen due to its low environmental impact (or toxicity) and cost. We demonstrate the effectiveness of different concentrations of Oxac as proposed formulations. The results from FTIR, XRD and optical microscopy analyses indicated that all the applied treatments destructed the Chr structure while a new biomaterial, Glushinskite (Gls) was formed by the reaction between Oxac with the outer Brucite (Brc) (MgO2) layer surface of Chr. Oxac 0.05M was selected as the optimal concentration for an eight-day treatment for the detoxification. The heating of the supernatant of the above-treated solution at 480°C, yielded MgO in a considerable concentration (8.29% w/w). According to the energy consumption study the whole applied procedure is viable with an economic profit up to 4.3% and a low cost method of detoxification on the operation of a potential asbestos waste management site.

  Copyright © 2017. Published by Elsevier B.V.

• Mineralogy and textures of riebeckitic asbestos (crocidolite): The role of single versus agglomerated fibres in toxicological experiments. S. Yao, G. Iezzi, G. Della Ventura, et al. 2017;340:472-485. PubMed · Publisher

  Abstract

  Asbestos may cause adverse effects, but relationship between mineralogy and texture of fibres versus toxicity is still lacking. Toxicological studies can be interpreted and compared only if quantitative features of fibres are determined. Here, riebeckitic ("crocidolite") amphibole fibres were analysed by XRPD, FTIR, SEM-EDS and EMP-WDS; only crystals with stochiometry A□BNa2C(Fe2+2.5Mg0.5)CFe3+2TSi8O22W(OH)2 are present in the starting material used for the experiments. Fibres deposited from solutions of 0.1, 1, 10, 25, 50, 75 and 100mg/L were counted by image analysis using SEM images. At 0.1 and 1mg/L the fibres are well separated, whereas between 1 and 10mg/L they start to agglomerate. In-vitro tests performed on fibres deposited at the same mg/L concentrations show that the toxic potential follows a curvilinear increasing trend with a decreasing rate. Since the range of sizes of single fibres and their mineralogy are constant, this decreasing rate can be only attributed to the increasing amount of agglomerated fibres. Hence, single versus agglomerated fibre population is a factor that cannot be neglected in defining the final adverse effects of asbestos. The analytical protocol proposed here is valuable for any aero-dispersed dust, in polluted environments, as well as in the interpretation of experimental studies.

  Copyright © 2017 Elsevier B.V. All rights reserved.

• Assessment of asbestos body formation by high resolution FEG-SEM after exposure of Sprague-Dawley rats to chrysotile, crocidolite, or erionite. N.B. Gandolfi, A.F. Gualtieri, S. Pollastri, et al. 2016;306:95-104. PubMed · Publisher

  Abstract

  This work presents a comparative FEG-SEM study of the morphological and chemical characteristics of both asbestos bodies and fibres found in the tissues of Sprague-Dawley rats subjected to intraperitoneal or intrapleural injection of UICC chrysotile, UICC crocidolite and erionite from Jersey, Nevada (USA), with monitoring up to 3 years after exposure. Due to unequal dosing based on number of fibres per mass for chrysotile with respect to crocidolite and erionite, excessive fibre burden and fibre aggregation during injection that especially for chrysotile would likely not represent what humans would be exposed to, caution must be taken in extrapolating our results based on instillation in experimental animals to human inhalation. Notwithstanding, the results of this study may help to better understand the mechanism of formation of asbestos bodies. For chrysotile and crocidolite, asbestos bodies are systematically formed on long asbestos fibres. The number of coated fibres is only 3.3% in chrysotile inoculated tissues. In UICC crocidolite, Mg, Si, and Fe are associated with the fibres whereas Fe, P and Ca are associated with the coating. Even for crocidolite, most of the observed fibres are uncoated as coated fibres are about 5.7%. Asbestos bodies do not form on erionite fibres. The crystal habit, crystallinity and chemistry of all fibre species do not change with contact time, with the exception of chrysotile which shows signs of leaching of Mg. A model for the formation of asbestos bodies from mineral fibres is postulated. Because the three fibre species show limited signs of dissolution in the tissue, they cannot act as source of elements (primarily Fe, P and Ca) promoting nucleation and growth of asbestos bodies. Hence, the limited number of coated fibres should be due to the lack of nutrients or organic nature.

  Copyright © 2015 Elsevier B.V. All rights reserved.

• Assessment of asbestos exposure during a simulated agricultural activity in the proximity of the former asbestos mine of Balangero, Italy. F. Turci, S.E. Favero-Longo, C. Gazzano, et al. 2016;308:321-7. PubMed · Publisher

  Abstract

  The natural occurrence of asbestos (NOA) in rural areas is a serious concern for human health and the dispersion route of asbestos in the proximity of natural asbestos-rich settings has been marginally evaluated so far. NOA may affect air, but also water and soil quality. In rural areas population may be exposed to asbestos with a largely unknown impact on human health. This work investigates the potential exposure of a farmer cultivating a field nearby the largest former asbestos mine of Western Europe (Balangero, Italy). The concentration of waterborne asbestos in the stream used to water the field was measured (ca. 2×10(5) fibers per liter, ff/L) and the cultivated ultramafic topsoil characterized, evidencing a remarkable occurrence of chrysotile. The worker's personal exposure and the environmental fiber dispersion during a simulated agricultural activity (tillage) were quantified in two independent trials. During the trials, the worker was exposed to average concentrations of 16 and 26 ff/L, with a peak of 40 ff/L. These data inform about the possible exposure of an agricultural worker to asbestos concentration higher than the accepted threshold of 2 ff/L. The release of asbestos fibers into the environment was negligible (0-2 ff/L).

  Copyright © 2016 Elsevier B.V. All rights reserved.

• Chrysotile asbestos detoxification with a combined treatment of oxalic acid and silicates producing amorphous silica and biomaterial. A. Valouma, A. Verganelaki, P. Maravelaki-Kalaitzaki, et al. 2016;305:164-170. PubMed · Publisher

  Abstract

  This study was primarily imposed by the ever increasing need for detoxification of asbestos and asbestos containing materials (ACM), with potential application onsite. The present work investigates potential detoxification of pure chrysotile (Chr) asbestos via a combined treatment of oxalic acid dihydrate (Oxac) (Η2C2Ο4·2Η2Ο) with silicates, such as tetraethoxysilane (TEOS) (SiH20C8O4) and pure water glass (WG) (potassium silicate) (K2SiO3). These reagents used in the experimental procedure, do not cause adverse effects on the environment and are cost effective. The results of FTIR, XRD, optical and scanning microscopy coupled with EDS analyses indicated that all of the applied treatments destructed the Chr structure and yielded silica of amorphous phase and the biomaterial glushinskite from the Oxac reacted with brucite [Mg(OH)2] layer. Each of the proposed formulations can be applied for the detoxification of asbestos, according to priorities related to the specific products of the recovery treatment. Therefore, Oxac acid leaching followed by the TEOS addition is preferred in cases of glushinskite recovery; TEOS treatment of asbestos with subsequent Oxac addition produced amorphous silica production; finally Oxac acid leaching followed by WG encapsulated the asbestos fibers and can be used in cases of onsite asbestos and ACM detoxification.

  Copyright © 2015 Elsevier B.V. All rights reserved.

• Inoculation of Brassica oxyrrhina with plant growth promoting bacteria for the improvement of heavy metal phytoremediation under drought conditions. Y. Ma, M. Rajkumar, C. Zhang, et al. 2016;320:36-44. PubMed · Publisher

  Abstract

  The aim of this study was to investigate the effects of drought resistant serpentine rhizobacteria on plant growth and metal uptake by Brassica oxyrrhina under drought stress (DS) condition. Two drought resistant serpentine rhizobacterial strains namely Pseudomonas libanensis TR1 and Pseudomonas reactans Ph3R3 were selected based on their ability to stimulate seedling growth in roll towel assay. Further assessment on plant growth promoting (PGP) parameters revealed their ability to produce indole-3-acetic acid, siderophore and 1-aminocyclopropane-1-carboxylate deaminase. Moreover, both strains exhibited high resistance to various heavy metals, antibiotics, salinity and extreme temperature. Inoculation of TR1 and Ph3R3 significantly increased plant growth, leaf relative water and pigment content of B. oxyrrhina, whereas decreased concentrations of proline and malondialdehyde in leaves under metal stress in the absence and presence of DS. Regardless of soil water conditions, TR1 and Ph3R3 greatly improved organ metal concentrations, translocation and bioconcentration factors of Cu and Zn. The successful colonization and metabolic activities of P. libanensis TR1 and P. reactans Ph3R3 represented positive effects on plant development and metal phytoremediation under DS. These results indicate that these strains could be used as bio-inoculants for the improvement of phytoremediation of metal polluted soils under semiarid conditions.

  Copyright © 2016 Elsevier B.V. All rights reserved.

• Detoxification mechanism of asbestos materials by microwave treatment. N. Yoshikawa, K. Kashimura, M. Hashiguchi, et al. 2015;284:201-6. PubMed · Publisher

  Abstract

  The detoxification mechanism of asbestos materials was investigated through simulations and experiments. The permittivities of pure CaO and Mg3Si4O12, as quasi-asbestos materials, were measured using the cavity perturbation method. The real and imaginary parts of the relative permittivity (ɛr' and ɛr″) of CaO are functions of temperature, and numerical simulations revealed the thermal distributions in an electromagnetic field with respect to both asbestos shape and material configuration based on permittivity. Optical microscopic observation revealed that the thickness of chrysotile fibers decreased as a result of CaO heating. The heating mechanism of asbestos materials has been determined using CaO phase, and the detoxification mechanism of asbestos materials was discussed based on the heating mechanism.

  Copyright © 2014 Elsevier B.V. All rights reserved.

• Evaluating the efficiency of an asbestos stabilizer on ceiling tiles and the characteristics of the released asbestos fibers. H.S. Jung, J.S. Cha, S. Kim, et al. 2015;300:378-386. PubMed · Publisher

  Abstract

  The efficiency of asbestos stabilizers and their adaptability were evaluated by investigating the characteristics of asbestos fibers released from ceiling tiles. The impact of such variables as the wind speed or vibration conditions was also studied along with the asbestos stabilizers. The concentrations of the asbestos fibers released from damaged ceiling tiles treated with stabilizers decreased by 69.5-84.4% compared with those of untreated tiles for all variables, with a statistically significant difference (p<0.001). The effects of the environmental factors on the asbestos concentrations were analyzed through a multiple regression analysis. It was determined that the surface status of the ceiling tiles and stabilizers were the main factors affecting the concentration, and the reliability of these factors was estimated as 58.3%. The lengths of the chrysotile fibers released from the damaged ceiling tiles were in the range of 0.991-79.1 μm for the untreated tiles and 3.74-35.6 μm for the tiles treated with inorganic stabilizers. It was confirmed that inorganic stabilizers are more efficient for damaged ceiling tiles. The results of this study also show that the asbestos concentrations are greatly reduced after treating damaged ceiling tiles with a stabilizer.

  Copyright © 2015 Elsevier B.V. All rights reserved.

• The chemical environment of iron in mineral fibres. A combined X-ray absorption and Mössbauer spectroscopic study. S. Pollastri, F. D'Acapito, A. Trapananti, et al. 2015;298:282-93. PubMed · Publisher

  Abstract

  Although asbestos represents today one of the most harmful contaminant on Earth, in 72% of the countries worldwide only amphiboles are banned while controlled use of chrysotile is allowed. Uncertainty on the potential toxicity of chrysotile is due to the fact that the mechanisms by which mineral fibres induces cyto- and geno-toxic damage are still unclear. We have recently started a long term project aimed at the systematic investigation of the crystal-chemistry, bio-interaction and toxicity of the mineral fibres. This work presents a systematic structural investigation of iron in asbestos and erionite (considered the most relevant mineral fibres of social and/or economic-industrial importance) using synchrotron X-ray absorption and Mössbauer spectroscopy. In all investigated mineral fibres, iron in the bulk structure is found in octahedral sites and can be made available at the surface via fibre dissolution. We postulate that the amount of hydroxyl radicals released by the fibers depends, among other factors, upon their dissolution rate; in relation to this, a ranking of ability of asbestos fibres to generate hydroxyl radicals, resulting from available surface iron, is advanced: amosite > crocidolite ≈ chrysotile > anthophyllite > tremolite. Erionite, with a fairly high toxicity potential, contains only octahedrally coordinated Fe(3+). Although it needs further experimental evidence, such available surface iron may be present as oxide nanoparticles coating and can be a direct cause of generation of hydroxyl radicals when such coating dissolves.

  Copyright © 2015 Elsevier B.V. All rights reserved.

• Morphological changes during enhanced carbonation of asbestos containing material and its comparison to magnesium silicate minerals. G. Gadikota, C. Natali, C. Boschi, et al. 2014;264:42-52. PubMed · Publisher

  Abstract

  The disintegration of asbestos containing materials (ACM) over time can result in the mobilization of toxic chrysotile ((Mg, Fe)3Si2O5(OH)4)) fibers. Therefore, carbonation of these materials can be used to alter the fibrous morphology of asbestos and help mitigate anthropogenic CO2 emissions, depending on the amount of available alkaline metal in the materials. A series of high pressure carbonation experiments were performed in a batch reactor at PCO2 of 139atm using solvents containing different ligands (i.e., oxalate and acetate). The results of ACM carbonation were compared to those of magnesium silicate minerals which have been proposed to permanently store CO2 via mineral carbonation. The study revealed that oxalate even at a low concentration of 0.1M was effective in enhancing the extent of ACM carbonation and higher reaction temperatures also resulted in increased ACM carbonation. Formation of phases such as dolomite ((Ca, Mg)(CO3)2), whewellite (CaC2O4·H2O) and glushinskite (MgC2O4·2H2O) and a reduction in the chrysotile content was noted. Significant changes in the particle size and surface morphologies of ACM and magnesium silicate minerals toward non-fibrous structures were observed after their carbonation.

  Copyright © 2013 Elsevier B.V. All rights reserved.

• Recycling of asbestos tailings used as reinforcing fillers in polypropylene based composites. W. Zhai, Y. Wang, Y. Deng, et al. 2014;270:137-43. PubMed · Publisher

  Abstract

  In this work, asbestos tailings were recycled and used as reinforcing fillers to enhance the mechanical properties of polypropylene (PP). A silane coupling agent was used to chemically modify the asbestos tailings to increase the compatibility between asbestos tailings and polypropylene matrix. Both raw and chemically treated asbestos tailings with different loading levels (from 3 to 30 wt%) were utilized to fabricate composites. Mechanical properties of these composites have been investigated by dynamic mechanical analysis, tensile test and notched impact test. Results showed that hybridization of asbestos tailings in the composites enhanced the mechanical properties of neat PP evidently, and treated asbestos tailings/PP composites yielded even better mechanical properties compared with those of raw asbestos tailings/PP composites. This recycling method of asbestos tailings not only reduces disposal costs and avoids secondary pollution but also produces a new PP-based composite material with enhanced mechanical properties.

  Copyright © 2014 Elsevier B.V. All rights reserved.

• The zeta potential of mineral fibres. S. Pollastri, A.F. Gualtieri, M.L. Gualtieri, et al. 2014;276:469-79. PubMed · Publisher

  Abstract

  For the first time, the zeta (ξ) potential of pathogenic mineral fibres (chrysotiles, amphiboles and erionite) was systematically investigated to shed light on the relationship between surface reactivity and fibre pathogenicity. A general model explaining the zeta potential of chrysotile, amphiboles and erionite has been postulated. In double distilled water, chrysotiles showed positive values while crocidolite and erionite showed negative values. In contact with organic solutions, all fibres exhibited negative values of zeta potential. The decrease of the surface potential is deemed to be a defensive chemical response of the macrophage cells to minimize hemolytic damage. Negatively charged surfaces favour the binding of collagen and redox activated Fe-rich proteins, to form the so-called asbestos bodies and prompt the formation of HO via the reaction with peroxide (H2O2+e(-)→HO+HO(-)). An additional mechanism accounting for higher carcinogenicity is possibly related to the Ca(2+) sequestration by the fibres with surface negative potential, impairing the mitochondrial apoptotic pathway. It was also found that with a negative zeta potential, the attractive forces prevailed over repulsions and favoured processes such as agglomeration responsible of a tumorigenic chronic inflammation.

  Copyright © 2014 Elsevier B.V. All rights reserved.

• Thermochemical destruction of asbestos-containing roofing slate and the feasibility of using recycled waste sulfuric acid. S.N. Nam, S. Jeong, H. Lim. 2014;265:151-7. PubMed · Publisher

  Abstract

  In this study, we have investigated the feasibility of using a thermochemical technique on ∼17% chrysotile-containing roofing sheet or slate (ACS), in which 5N sulfuric acid-digestive destruction was incorporated with 10-24-h heating at 100°C. The X-ray diffraction (XRD) and the polarized light microscopy (PLM) results have clearly shown that raw chrysotile asbestos was converted to non-asbestiform material with no crystallinity by the low temperature thermochemical treatment. As an alternative to the use of pricey sulfuric acid, waste sulfuric acid discharged from a semiconductor manufacturing process was reused for the asbestos-fracturing purpose, and it was found that similar removals could be obtained under the same experimental conditions, promising the practical applicability of thermochemical treatment of ACWs. A thermodynamic understanding based on the extraction rates of magnesium and silica from a chrysotile structure has revealed that the destruction of chrysotile by acid-digestion is greatly influenced by the reaction temperatures, showing a 80.3-fold increase in the reaction rate by raising the temperature by 30-100°C. The overall destruction is dependent upon the breaking-up of the silicon-oxide layer - a rate-limiting step. This study is meaningful in showing that the low temperature thermochemical treatment is feasible as an ACW-treatment method.

  Copyright © 2013 Elsevier B.V. All rights reserved.

• Change of carcinogenic chrysotile fibers in the asbestos cement (eternit) to harmless waste by artificial carbonatization: petrological and technological results. M. Radvanec, L. Tuček, J. Derco, et al. 2013;252-253:390-400. PubMed · Publisher

  Abstract

  Asbestos cement materials, mainly the eternit roof ceiling, being widely applied in the past, represent a serious environmental load. The solar radiation, rain and frost cause the deliberation of cement from the eternit roofing and consequently the wind contaminates the surrounding area by the asbestos (chrysotile) fibers. In combination with other carcinogens (e.g. smoking), or at reduced immunity of a man, they may cause serious respiratory diseases and lung cancer. The article presents the procedure and experimental results of artificial carbonatization, applied in the asbestos cement (eternit). The wet crushed and pulverized asbestos cement was thermally modified at 650°C and then the chrysotile fibers easily and completely reacted with the mixture of CO2 and water, producing new Mg-rich carbonates - hydromagnesite and magnesite: [Formula: see text] Applying this methodology, the asbestos-bearing waste can be stabilized and environmentally friendly permanently deposited. Finding a way of neutralizing of extreme pH values (around 12) at large eternit dumps represents also an asset of presented research. Simultaneously, the artificial carbonatization of chrysotile asbestos, applying CO2, offers an alternative way for permanent liquidation of a part of industrial CO2 emissions, contributing to multiple benefit of this methodology.

  Copyright © 2013 Elsevier B.V. All rights reserved.

• Crystal chemistry of the high temperature product of transformation of cement-asbestos. A. Viani, A.F. Gualtieri, S. Pollastri, et al. 2013;248-249:69-80. PubMed · Publisher

  Abstract

  In this work, the high-temperature inertization product of a representative batch of samples of cement-asbestos (CA) from different localities in Italy have been characterized with a multidisciplinary approach. All the raw CA samples were heated at 1200°C for 15 min. After firing, they underwent a series of solid state reactions leading to global structural changes of the matrix. Effects of annealing time and temperature on the crystallization kinetics were thoroughly investigated. Both factors acted in favour of equilibrium. Three classes of CA were identified with the aid of phase diagrams and of specific plots relating chemical and mineralogical parameters. This result was considered of importance in view of the potential use of transformed cement-asbestos as a secondary raw material. In principle, the content of CA packages removed from the environment and their corresponding heat-treated products can be classified simply using XRF. This method allows for the selection of appropriate fractions in function of the most suitable recycling solution adopted. Samples belonging to the class called larnite-rich, turned out to be of great interest as possible candidate for substituting a fraction of cement in many building materials and innovative green cement productions.

  Copyright © 2012 Elsevier B.V. All rights reserved.

• Efficient and versatile fibrous adsorbent based on magnetic amphiphilic composites of chrysotile/carbon nanostructures for the removal of ethynilestradiol. A.P. Teixeira, A.D. Purceno, C.C. de Paula, et al. 2013;248-249:295-302. PubMed · Publisher

  Abstract

  In this work, chrysotile was used as support to grow carbon nanotubes and nanofibers to produce fibrous amphiphilic magnetic nanostructured composites. Iron impregnated on the chrysotile surface at 1, 5 and 15 wt% was used as catalyst to grow carbon nanostructures by CVD (chemical vapor deposition) with ethanol at 800°C. Raman, TG/DTA, Mössbauer, XRD, BET, SEM, TEM, elemental analyses and contact angle measurements suggested the formation of a complex amphiphilic material containing up to 21% of nanostructured hydrophobic carbon supported on hydrophilic Mg silicate fibers with magnetic Fe cores protected by carbon coating. Adsorption tests for the hormone ethynilestradiol (EE), a hazardous water contaminant, showed remarkable adsorption capacities even compared to high surface area activated carbon and multiwall carbon nanotubes. These results are discussed in terms of the hydrophobic surface of the carbon nanotubes and nanofibers completely exposed and accessible for the adsorption of the EE molecules combined with the hydrophilic Mg silicate surface which allows good dispersion in water. The composites are magnetic and after adsorption the dispersed particles can be removed by a simple magnetic process. Moreover, the fibrous composites can be conformed as threads, screens and pellets to produce different filtering media.

  Copyright © 2013 Elsevier B.V. All rights reserved.

• Modeling of quantitative effects of water components on the photocatalytic degradation of 17α-ethynylestradiol in a modified flat plate serpentine reactor. D. Wang, Y. Li, G. Li, et al. 2013;254-255:64-71. PubMed · Publisher

  Abstract

  The effect of water components on the photocatalytic degradation of organic pollutants was incompletely understood, especially in the case of hydroxyl radical (•OH) generation and scavenging. Previous studies have used various methods to determine the rate constants for the reactions between •OH and water components, but the interactions between water components were not taken into concern. In this study, a sequential relative rate technique was used to investigate the effects of water components on the rates of •OH generation and EE2 degradation in a modified flat plate serpentine reactor, including NO₃(-), H₂PO₄(-), SO₄(2-), CO₃(2-), Cl(-), Na(+), Fe(3+), dissolved organic matter (DOM) etc. The results reflected that NO₃(-) and DOM accelerated the photodegradation of 17α-ethynylestradiol (EE2) (3.2% and 21.2%, respectively). Cl(-) and Fe(3+) inhibited that process (5.2% and 3.1%, respectively). Finally, a model for the photocatalytic degradation of EE2 was developed for the first time, taking the obtained rate constants, catalyst concentrations, flow velocities and light intensities into concern. A good agreement was observed between the model and experimental profiles.

  Copyright © 2013 Elsevier B.V. All rights reserved.

• Recycling the product of thermal transformation of cement-asbestos for the preparation of calcium sulfoaluminate clinker. A. Viani, A.F. Gualtieri. 2013;260:813-8. PubMed · Publisher

  Abstract

  According to recent resolutions of the European Parliament (2012/2065(INI)), the need for environmentally friendly alternative solutions to landfill disposal of hazardous wastes, such as asbestos-containing materials, prompts their recycling as secondary raw materials (end of waste concept). In this respect, for the first time, we report the recycling of the high temperature product of cement-asbestos, in the formulation of calcium sulfoaluminate cement clinkers (novel cementitious binders designed to reduce CO₂ emissions), as a continuation of a previous work on their systematic characterization. Up to 29 wt% of the secondary raw material was successfully introduced into the raw mix. Different clinker samples were obtained at 1250 °C and 1300 °C, reproducing the phase composition of industrial analogues. As an alternative source of Ca and Si, this secondary raw material allows for a reduction of the CO₂ emissions in cement production, mitigating the ecological impact of cement manufacturing, and reducing the need for natural resources.

  Copyright © 2013 Elsevier B.V. All rights reserved.

• In vitro biodurability of the product of thermal transformation of cement-asbestos. A.F. Gualtieri, A. Viani, G. Sgarbi, et al. 2012;205-206:63-71. PubMed · Publisher

  Abstract

  To safely recycle the product of the thermal transformation of cement-asbestos as secondary raw material, its toxicity potential should be assessed by in vitro biodurability tests. In this work, the acellular in vitro biodurability of the products of transformation of cement-asbestos at 1200 °C (named KRY·AS) was tested using both inorganic and organic simulated lung fluids at pH 4.5. The dissolution kinetics were followed using chemical, mineralogical and microstructural analyses. The total dissolution time estimated from the experiments with inorganic HCl diluted solution is one order of magnitude higher than that determined from the experiments with buffered Gamble solution (253 days vs. 20 days). The key parameter determining the difference in dissolution rate turns out to be the solidus/liquidus ratio which prompts a fast saturation of the solution with monosilicic acid. The calculated dissolution rate constants showed that the biodurability in vitro of KRY·AS is much lower with respect to that of standard chrysotile asbestos (total estimated dissolution time of 20 days vs. 298 days, respectively). This proves a low potential toxicity of this secondary raw material.

  Copyright © 2011 Elsevier B.V. All rights reserved.

• Cadmium phytoextraction potential of different Alyssum species. R. Barzanti, I. Colzi, M. Arnetoli, et al. 2011;196:66-72. PubMed · Publisher

  Abstract

  This work was planned for providing useful information about the possibility of using serpentine adapted plants for phytoextraction of cadmium, element scarcely represented in such metalliferous environment. To this aim, we investigated variation in cadmium tolerance, accumulation and translocation in three Alyssum plants with different phenotypes: Alyssum bertolonii, that is a serpentine endemic nickel hyperaccumulator, and two populations of Alyssum montanum, one adapted and one not adapted to serpentine soils. Plants were hydroponically cultivated in presence of increasing concentrations of CdSO(4) for two weeks. For the metal concentration used in the experiments, the three different Alyssum populations showed variation in cadmium tolerance, accumulation and content. The serpentine adapted population of A. montanum showed statistically higher cadmium tolerance and accumulation than A. bertolonii and the population of A. montanum not adapted to serpentine soil thus deserving to be investigated for phytoextraction purposes. Furthermore, as for the kinetic parameters of the cadmium uptake system, A. montanum serpentine population presented a low apparent K(m) value, suggesting a high affinity for this metal of its uptake system, whereas the V(max) values were not significantly different among the plants. Present data revealed metallicolous plants are also suitable for the phytoremediation of metals underrepresented in the environment of their initial origin. Nonetheless, field trials on real contaminated soils are essential.

  Copyright © 2011 Elsevier B.V. All rights reserved.

• Treatment and recycling of asbestos-cement containing waste. F. Colangelo, R. Cioffi, M. Lavorgna, et al. 2011;195:391-7. PubMed · Publisher

  Abstract

  The remediation of industrial buildings covered with asbestos-cement roofs is one of the most important issues in asbestos risk management. The relevant Italian Directives call for the above waste to be treated prior to disposal on landfill. Processes able to eliminate the hazard of these wastes are very attractive because the treated products can be recycled as mineral components in building materials. In this work, asbestos-cement waste is milled by means of a high energy ring mill for up to 4h. The very fine powders obtained at all milling times are characterized to check the mineralogical and morphological transformation of the asbestos phases. Specifically, after 120 min of milling, the disappearance of the chrysotile OH stretching modes at 3690 cm(-1), of the main crystalline chrysotile peaks and of the fibrous phase are detected by means of infrared spectroscopy and X-ray diffraction and scanning electron microscopy analyses, respectively. The hydraulic behavior of the milled powders in presence of lime is also tested at different times. The results of thermal analyses show that the endothermic effects associated to the neo-formed binding phases significantly increase with curing time. Furthermore, the technological efficacy of the recycling process is evaluated by preparing and testing hydraulic lime and milled powder-based mortars. The complete test set gives good results in terms of the hydration kinetics and mechanical properties of the building materials studied. In fact, values of reacted lime around 40% and values of compressive strength in the range of 2.17 and 2.29 MPa, are measured.

  Copyright © 2011 Elsevier B.V. All rights reserved.

• Treatment of airborne asbestos and asbestos-like microfiber particles using atmospheric microwave air plasma. A. Averroes, H. Sekiguchi, K. Sakamoto. 2011;195:405-13. PubMed · Publisher

  Abstract

  Atmospheric microwave air plasma was used to treat asbestos-like microfiber particles that had two types of ceramic fiber and one type of stainless fiber. The treated particles were characterized via scanning electron microscopy (SEM) and X-ray diffraction (XRD). The experiment results showed that one type of ceramic fiber (Alumina:Silica=1:1) and the stainless fiber were spheroidized, but the other type of ceramic fiber (Alumina:Silica=7:3) was not. The conversion of the fibers was investigated by calculating the equivalent diameter, the aspect ratio, and the fiber content ratio. The fiber content ratio in various conditions showed values near zero. The relationship between the normalized fiber vanishing rate and the energy needed to melt the particles completely per unit surface area of projected particles, which is defined as η, was examined and seen to indicate that the normalized fiber vanishing rate decreased rapidly with the increase in η. Finally, some preliminary experiments for pure asbestos were conducted, and the analysis via XRD and phase-contrast microscopy (PCM) showed the availability of the plasma treatment.

  Copyright © 2011 Elsevier B.V. All rights reserved.

• Hydrothermal conversion of chrysotile asbestos using near supercritical conditions. K. Anastasiadou, D. Axiotis, E. Gidarakos. 2010;179(1-3):926-32. PubMed · Publisher

  Abstract

  The present research investigates, develops and evaluates the transformation of chrysotile asbestos into a non-hazardous material, such as forsterite, using an economically viable and safe method. The aim of this study is to convert fibrous chrysotile asbestos into an anhydrous magnesium silicate with a non-hazardous lamellar morphology using supercritical steam. The treatment method is characterized as hydrothermal in a temperature and pressure range of 300-700 degrees C and 1.75-5.80 MPa, respectively. Small amounts of asbestos (2.5 g) were treated in each experiment. Deionised water was used as the treatment solution. The treatment duration varied from approximately 1-5 h. Additional experiments took place using solutions of distilled water and small amounts of acetic acid, with the aim of attaining optimal treatment conditions. Crystal phases of the samples were determined by X-ray diffraction (XRD). The main phases present in the treated samples were forsterite, enstatite, and chrysotile asbestos. Lizardite and periclase were also found. The morphology of the treated chrysotile asbestos fibers was identified by scanning electron microscope (SEM). The fibrous form of chrysotile asbestos was converted into non-fibrous form of forsterite. In fact, none of the fibrous-needle-like morphology, with length equal to or greater than 5 microm and diameter less than 3 microm, which was responsible for the toxicity of the original material, was visible in the solid phase. The dissolution of magnesium from chrysotile asbestos was measured using volumetric determination by titration with EDTA. Leaching of magnesium into the liquid phase was observed. Clearly, the highest concentrations of dissolved magnesium are observed after hydrothermal treatment of chrysotile asbestos using acetic acid 1% (8.4-14.6%). Lowest concentrations of dissolved magnesium are obtained after hydrothermal treatment of chrysotile asbestos without using additives. Observing the results of the hydrothermal treatment using additives, the mineralogical conversion does not depend on the presence of a small quantity of weak organic acid (<1%). The addition of acetic acid 1% during hydrothermal treatment did not involve changes in the conditions of the chrysotile asbestos' mineral conversion.

  2010 Elsevier B.V. All rights reserved.

2000s

• A novel decomposition technique of friable asbestos by CHClF2-decomposed acidic gas. K. Yanagisawa, T. Kozawa, A. Onda, et al. 2009;163(2-3):593-9. PubMed · Publisher

  Abstract

  Asbestos was widely used in numerous materials and building products due to their desirable properties. It is, however, well known that asbestos inhalation causes health damage and its inexpensive decomposition technique is necessary to be developed for pollution prevention. We report here an innovative decomposition technique of friable asbestos by acidic gas (HF and HCl) generated from the decomposition of CHClF(2) by the reaction with superheated steam at 800 degrees C. Chrysotile-asbestos fibers were completely decomposed to sellaite and magnesium silicofluoride hexahydrate by the reaction with CHClF(2)-decomposed acidic gas at 150 degrees C for 30 min. At high temperatures beyond 400 degrees C, sellaite and hematite were detected in the decomposed product. In addition, crocidolite containing wastes and amosite containing wastes were decomposed at 500 degrees C and 600 degrees C for 30 min, respectively, by CHClF(2)-decomposed acidic gas. The observation of the reaction products by phase-contrast microscopy (PCM) and scanning electron microscopy (SEM) confirmed that the resulting products did not contain any asbestos.

• Ablation mechanism of polymer layered silicate nanocomposite heat shield. A.R. Bahramian, M. Kokabi. 2009;166(1):445-54. PubMed · Publisher

  Abstract

  Recent advances in polymer layered silicate nanocomposites especially improve flammability resistance; encourage the examination of this unique class of evolving materials as potential ablatives. Polymer layered silicate nanocomposites show excellent potential as ablative heat shields. Determining the thermal diffusivity together with the mass and energy transfer is an important problem encountered in design of heat shield system which pyrolyses and ablates at high temperature. The aim of this work is to give information on the influence of the experimental conditions to the estimated effective thermal diffusivity of ablative nanocomposite and composite materials. Here, we present the inverse solution to estimate the parameter used to identify the effective thermal diffusivity of resol type phenolic resin-asbestos cloth montmorillonite layered silicate nanocomposite and its composite counterpart. The experimental setup consists of a standard oxyacetylene flame test. The transient temperature measurements, taken from the top surface and through the thickness of the samples, are used in the inverse analysis to estimate the change of the effective thermal diffusivity. The results of this work clarify the mechanism of the ablation and thermal diffusivity of the layered silicate nanocomposite heat shields due to the high temperature degradation in comparison with its composite counterpart.

• Asbestos health hazard: a spectroscopic study of synthetic geoinspired Fe-doped chrysotile. E. Foresti, E. Fornero, I.G. Lesci, et al. 2009;167(1-3):1070-9. PubMed · Publisher

  Abstract

  The chrysotile fibres toxicity appears correlated to the redox activity of iron present in the chrysotile structure. In fact the generation of reactive oxygen species and other radicals appears catalyzed by iron ions and closely related to Fe ions organization in specific crystallographic sites having a capability to activate free radical generation. The Fe substitution to Mg and/or Si in the chrysotile structure appears important for asbestos health hazard investigation. Infrared and Raman spectroscopic analyses have been utilized to investigate Mg and/or Si ions replacement by Fe ions in chrysotile structure as a function of the Fe doping extent. Geoinspired synthetic chrysotile at different Fe doping extents has been obtained as unique phase by hydrothermal reaction in the presence or not of metallic Fe in the synthetic environment. The results highlight that Fe can replace both Mg and Si, differently modifying the chrysotile structure as a function of the Fe doping extent and the Fe doping process. The contemporary iron substitution into the octahedral and tetrahedral sheets reveals an appreciable increase of the dehydroxylation temperature which occurs at higher temperature than for iron-free sample. The results highlight the role of Fe substitution in the asbestos structure influencing the health hazard of biological systems.

• Asbestos pollution in an inactive mine: determination of asbestos fibers in the deposit tailings and water. E. Koumantakis, A. Kalliopi, K. Dimitrios, et al. 2009;167(1-3):1080-8. PubMed · Publisher

  Abstract

  An inactive asbestos mine in Northern Greece, known as MABE, had been operational for 18 years, showing an annual chrysotile production of approximately 100,000 tons. It is estimated that a total of 68 million tons of the mineral serpentine were excavated from the mine, of which 881,000 tons of chrysotile asbestos were produced. The mine deposits are located very near to the river Aliakmonas. The water of the river is extensively used as drinking water, as well as for irrigation. This study estimated the amount of asbestos currently present in the deposits, to at least 1.33 million tons. This is a 10-fold increase since the start of mine operation in 1982. Water samples obtained throughout the river had high chrysotile concentrations, in most cases far exceeding EPA's standard value (7 x 10(6)f/l). Therefore, the mine and the deposits urgently require remediation works, such as removal of large contaminated objects from the mine buildings and re-vegetation of the deposit areas, in order to reduce the asbestos levels in the river water.

• Emission of airborne fibers from mechanically impacted asbestos-cement sheets and concentration of fibrous aerosol in the home environment in Upper Silesia, Poland. J.S. Pastuszka. 2009;162(2-3):1171-7. PubMed · Publisher

  Abstract

  The emission rate ((S)) of fibers released from asbestos-cement plates due to mechanical impact was determined experimentally. The emission rate has been defined as a number of fibers (F) emitted from a unit area (m(2)) due to the unit impact energy (J). For fiber longer than 5 microm the obtained surface emission factor for asbestos-cement slabs slightly increased with deteriorating surface, changing from 2.7 x 10(3) F/(m(2)J) for samples with a very good surface to 6.9 x 10(3) F/(m(2)J) for the sample with worn surface (in the SI system the emission rate unit should be (m(-2)J(-1))). The emission rate for short fibers (L < or = 5 microm) was little higher compared with emission of long fibers for all studied asbestos materials. The averaged emission rate for all studied samples was about 5000 and 6000 of long and short fibers, respectively, emitted per square meter (because of the impact energy equal to 1J). The dominating population of emitted fibers ranged from 2 to around 8 microm in length. The second part of this work constitutes the report on the concentration of airborne respirable fibers, and their length distribution in two different groups of homes in Upper Silesia, Poland. Mean concentration level of the respirable fibers, longer than 5 microm, was found to be 850 F/m(3) (according to the SI system the fiber concentration unit is (m(-3))) in the buildings covered with asbestos-cement sheets and 280 F/m(3) in the homes without asbestos-containing facades, located away from other asbestos sources. Although the laboratory and field measurements have been made by using the MIE Laser Fiber Monitor FM-7400 only, the obtained results indicate that the outdoor asbestos-cement building facades are significant sources of airborne fibers inside the dwellings in Upper Silesian towns.

• Lichens on asbestos-cement roofs: bioweathering and biocovering effects. S.E. Favero-Longo, D. Castelli, B. Fubini, et al. 2009;162(2-3):1300-8. PubMed · Publisher

  Abstract

  Asbestos-cement roofs, the most widespread sources of airborne, toxic and carcinogenic asbestos fibres, are often colonized by lichens. Since these latter are physical and chemical weathering agents, they have been often considered as significant responsible of disaggregation processes increasing fibre dispersion. Consequently, official guidelines for the management of asbestos often suggest their removal. Weathering and/or covering effects of lichens on asbestos-cement, however, have never been deeply investigated and available procedures to evaluate asbestos-cement aging do not take the biological colonization into account. In this study we show that a 25% lichen cover modifies physical and chemical properties of asbestos-cement sheets containing chrysotile and crocidolite fibres. By innovatively coupling pull up tests and image analysis of linear structures, we show that fibre loss is significantly lower ( approximately 30%) where lichens develop and offer a physical barrier to the fibre detachment. Below the most covering lichens (Acarospora cervina, Candelariella ssp.), chrysotile and crocidolite undergo a partial incongruent dissolution, which in laboratory assays generally determined a reduction of their surface reactivity. Because of their biocovering and bioweathering effects, lichens on asbestos-cement play a role which differs from the current public opinion and the assumptions of some official regulations, acting as effective spontaneous bioattenuation agents.

• The thermal transformation of Man Made Vitreous Fibers (MMVF) and safe recycling as secondary raw materials (SRM). A.F. Gualtieri, E. Foresti, I.G. Lesci, et al. 2009;162(2-3):1494-506. PubMed · Publisher

  Abstract

  This work describes the high temperature reaction sequence of commercial Man Made Vitreous Fibers (MMVF) Cerafiber, Superwool, Rock wool and Glass wool which may be used as substitute for asbestos in some industrial applications. Knowledge of the reaction path and transformation sequence is very important to assess whether carcinogenic crystalline phases are formed during devitrification, which may occur when used as insulators. In addition, knowledge about the nature of the phases formed at high temperature is mandatory to assess if thermally transformed MMVF can be safely recycled as secondary raw material (SRM). In this scenario, this study provides useful information for the optimization of the industrial annealing process aimed to attain a safe, recyclable product. The results of this work show that one of the high-temperature products of Cerafiber and Superwool is cristobalite which is classified as a carcinogenic. It was possible to define the temperature interval at which Cerafiber and Superwool fibers can be safely used as thermal insulators (e.g. insulators in tunnel and/or roller kilns, etc.). As cristobalite is formed in both synthetic fiber products at temperatures higher than 1200 degrees C, their use should be limited to devices operating at lower temperatures. Rock and Glass wool melt upon thermal treatment. As far as the industrial process of inertization is concerned, a maximum firing temperature of 1100 and 600 degrees C is required to melt Rock wool and Glass wool, respectively, with the high-temperature products that can be safely recycled as SRM. Recycling of these products in stoneware tile mixtures were subsequently attempted. The addition of 1-2 wt.% of the melts of Rock and Glass wool gave promising results in terms of viscous sintering reactions and resistance to staining with the only weak characteristic being the color properties of the fired bodies which tend to worsen.

• Thermal plasma technology for the treatment of wastes: a critical review. E. Gomez, D.A. Rani, C.R. Cheeseman, et al. 2009;161(2-3):614-26. Review PubMed · Publisher

  Abstract

  This review describes the current status of waste treatment using thermal plasma technology. A comprehensive analysis of the available scientific and technical literature on waste plasma treatment is presented, including the treatment of a variety of hazardous wastes, such as residues from municipal solid waste incineration, slag and dust from steel production, asbestos-containing wastes, health care wastes and organic liquid wastes. The principles of thermal plasma generation and the technologies available are outlined, together with potential applications for plasma vitrified products. There have been continued advances in the application of plasma technology for waste treatment, and this is now a viable alternative to other potential treatment/disposal options. Regulatory, economic and socio-political drivers are promoting adoption of advanced thermal conversion techniques such as thermal plasma technology and these are expected to become increasingly commercially viable in the future.

• High temperature ablation of kaolinite layered silicate/phenolic resin/asbestos cloth nanocomposite. A.R. Bahramian, M. Kokabi, M.H. Famili, et al. 2008;150(1):136-45. PubMed · Publisher

  Abstract

  The successful return of re-entry space vehicle, which is subjected to severe aerodynamic heating, is largely accompanied by some provisions to reduce the heat transfer to the structure. Heat shield is the best protection means which undergoes physical, chemical, and mostly endothermal transformations. The objective of this work is to investigate the ablating, charring, and thermal degradation behaviour of heat shield resol-type phenolic resin/kaolinite/asbestos cloth nanocomposite by oxyacetylene flame test with an external heat flux of 8 x 10(9)W/m(2) and 3000 K hot gas temperature and thermal analyzer techniques. Kinetic parameters of thermal degradation and temperature distribution at the back surface of the nanocomposite heat shield were determined and compared with that of composite counterpart.

• In situ ESEM study of the thermal decomposition of chrysotile asbestos in view of safe recycling of the transformation product. A.F. Gualtieri, M.L. Gualtieri, M. Tonelli. 2008;156(1-3):260-6. PubMed · Publisher

  Abstract

  The thermal transformation of asbestos into non-hazardous crystalline phases and their recycling is a promising solution for the "asbestos problem". The most common asbestos-containing industrial material produced worldwide is cement-asbestos. Knowledge of the kinetics of thermal transformation of asbestos fibers in cement-asbestos is of paramount importance for the optimization of the firing process at industrial scale. Here, environmental scanning electron microscopy (ESEM) was used for the first time to follow in situ the thermal transformation of chrysotile fibers present in cement-asbestos. It was found that the reaction kinetics of thermal transformation of chrysotile was highly slowed down in the presence of water vapor in the experimental chamber with respect to He. This was explained by chemisorbed water on the surface of the fibers which affected the dehydroxylation reaction and consequently the recrystallization into Mg-silicates. In the attempt to investigate alternative and faster firing routes for the decomposition of asbestos, a low melting glass was mixed with cement-asbestos and studied in situ to assess to which extent the decomposition of asbestos is favored. It was found that the addition of a low melting glass to cement-asbestos greatly improved the decomposition reaction and decreased the transformation temperatures.

• Investigative studies for the use of an inactive asbestos mine as a disposal site for asbestos wastes. E. Gidarakos, K. Anastasiadou, E. Koumantakis, et al. 2008;153(3):955-65. PubMed · Publisher

  Abstract

  Although, according to European legislation the use of Asbestos Containing Materials is forbidden, many buildings in Greece still contain asbestos products, which must be removed at some point in the near future. Therefore, suitable disposal sites must be found within Greece, so that the unverified disposal of asbestos waste in municipal waste Landfills is brought to an end. In the present work, an innovative approach to the disposal problem of asbestos wastes in Greece has been examined, through a risk assessment analysis of the inactive asbestos mine of Northern Greece and an evaluation of its suitability as a disposal site for asbestos wastes in the future. According to the research carried out, two areas (Site 1 and Site 2) inside the mine area are suitable for the construction of a disposal site for asbestos wastes. The geological investigations showed that in Site 1 and Site 2 ultrabasic rocks of ophiolite complex were prevalent, which have been intensely serpentinized and converted into the fibrous shape of serpentine (asbestos). Concentrations of hazardous substances such as heavy metals in the soil of Site 1 and Site 2 oscillate at low levels, with the exception of the concentrations of nickel and chrome which are high. The investigative work also included the collection of meteorological data and the monitoring of the water level of the artificial lake, which has developed inside the open mine. The main aim is to safely dispose asbestos wastes inside the mine, to minimize any pollution of the wider vicinity of the mine, as well as to engage in restoration activities.

• Naturally occurring asbestos: a recurring public policy challenge. R.J. Lee, B.R. Strohmeier, K.L. Bunker, et al. 2008;153(1-2):1-21. Review PubMed · Publisher

  Abstract

  The potential environmental hazards and associated public health issues related to exposure to respirable dusts from the vicinity of natural in-place asbestos deposits (commonly referred to as naturally occurring asbestos, NOA) have gained the regulatory and media spotlight in many areas around the United States, such as Libby, MT, Fairfax County, VA, and El Dorado Hills, CA, among others. NOA deposits may be present in a variety of geologic formations. It has been suggested that airborne asbestos may be released from NOA deposits, and absent appropriate engineering controls, may pose a potential health hazard if these rocks are crushed or exposed to natural weathering and erosion or to human activities that create dust. The issue that needs to be addressed at a policy level is the method of assessing exposures to elongated rock fragments ubiquitous in dust clouds in these same environments and the associated risk. Elongated rock fragments and single crystal minerals present in NOA have been construed by some as having attributes, including the health effects, of asbestos fibers. However, the Occupational Safety and Health Administration (OSHA), Mine Safety and Health Administration (MSHA), and the Consumer Products Safety Commission (CPSC) found that the scientific evidence did not support this assumption. As in many environmental fields of study, the evidence is often disputed. Regulatory policy is not uniform on the subject of rock fragments, even within single agencies. The core of the issue is whether the risk parameters associated with exposures to commercial asbestos can or should be applied to rock fragments meeting an arbitrary set of particle dimensions used for counting asbestos fibers. Inappropriate inclusion of particles or fragments results in dilution of risk and needless expenditure of resources. On the other hand, inappropriate exclusion of particles or fragments may result in increased and unnecessary risk. Some of the fastest growing counties in the United States are in areas where NOA is known to exist and therefore this issue takes on national significance. This ongoing national dilemma has raised public and business concerns. There has been continuing political and scientific debate and widespread miscommunication over perceived versus actual health risks, the validity of various analytical sampling and testing methods, the questionable necessity and escalating costs of remediation procedures, and the combined negative impact on numerous commercial and public interests. Thus, conflicting research and regulatory positions on the distinctions between and hazards of true asbestos and ordinary rock fragments is all that is presently available to the public until the differing scientific communities and government agencies arrive at a consensus on these issues. The risk assessment methodology and the analytical technology needed to support inferences drawn from existing research are available, but have not been organized and implemented in the manner needed to resolve the NOA controversy. There should exist nationally adopted and peer-reviewed NOA standards (developed jointly by the scientific community, health risk professionals, and government regulators) that establish: (1) a scientific basis for risk evaluation and assessment of NOA and rock fragments; (2) accepted analytical protocols for determining if NOA actually exists in a given area and for separating NOA from related non-asbestos rock fragments and single crystal minerals; and (3) effective public policies for managing NOA, minimizing potential hazards, and protecting public health. This article will review some of the key issues involved with the current NOA debate, propose improved analytical methodologies, describe potential solutions for dealing with NOA, and outline the benefits to be gained by creating a practical national NOA public policy.

• The transformation sequence of cement-asbestos slates up to 1200 degrees C and safe recycling of the reaction product in stoneware tile mixtures. A.F. Gualtieri, C. Cavenati, I. Zanatto, et al. 2008;152(2):563-70. PubMed · Publisher

  Abstract

  Cement-asbestos is the main asbestos containing material still found in most of the European countries such as Italy. Man- and weathering-induced degradation of the cement-asbestos slates makes them a source of dispersion of asbestos fibres and represents a priority cause of concern. This concern is the main prompt for the actual policy of abatement and disposal of asbestos containing materials in controlled wastes. An alternative solution to the disposal in dumping sites is the direct temperature-induced transformation of the cement-asbestos slates into non-hazardous mineral phases. This patented process avoids the stage of mechanical milling of the material before the treatment, which improves the reactivity of the materials but may be critical for the dispersion of asbestos fibres in working and life environment. For the first time, this paper reports the description of the reaction path taking place during the firing of cement-asbestos slates up to the complete transformation temperature, 1200 degrees C. The reaction sequence was investigated using different experimental techniques such as optical and electron microscopy, in situ and ex situ quali-quantitative X-ray powder diffraction. The understanding of the complex reaction path is of basic importance for the optimization of industrial heating processes leading to a safe recycling of the transformed product. For the recycling of asbestos containing materials, the Italian laws require that the product of the crystal chemical transformation of asbestos containing materials must be entirely asbestos-free, and should not contain more than 0.1 wt% fraction of the carcinogenic substances such as cristobalite. Moreover, if fibrous phases other than asbestos (with length to diameter ratio >3) are found, they must have a geometrical diameter larger than 3 microm. We have demonstrated that using an interplay of different experimental techniques, it is possible to safely verify the complete transformation of asbestos minerals in this temperature-induced process. The product of transformation of cement-asbestos (CATP) has a phase composition similar to that of a natural or a low temperature clinker with the exception of having a larger content of aluminium, iron and magnesium. This product can be safely recycled for the production of stoneware tile mixtures. The addition of 3-5 mass% of CATP does not bear significant variations to the standard parameters of white porcelain tile mixtures.

• Heavy metal sorption and desorption capacity of soils containing endogenous contaminants. E.F. Covelo, F.A. Vega, M.L. Andrade. 2007;143(1-2):419-30. PubMed · Publisher

  Abstract

  Soils on serpentinites in some regions of northwestern Spain have been the subject of agricultural management practices involving the use of fertilizers and various types of organic waste containing heavy metals. Although such practices have facilitated crop growth, they have also raised the natural contents in heavy metals of the soils. In this work, three ferralic Cambisols and another three mollic Leptosols with high Cr and Ni contents were used to study competitive sorption and desorption of six heavy metals via K(d100), which was employed as a measure of the ability of the soils to adsorb and retain each metal. Lead was found to be the metal sorbed and retained to the greatest extent, and Cd, Ni and Zn those sorbed and retained in the smallest amounts. Although the ferralic Cambisols were found to contain greater amounts of natural heavy metals, they exhibited an increased ability to adsorb and retain the body of metals relative to the mollic Leptosols by effect of their increased contents in clay and Fe, Mn and Al oxides, in addition to their higher ion-exchange capacity. Based on the results, Pb and Cu are strongly bound, and Zn, Cd and Ni weakly bound, to the soils. The ferralic Cambisols exhibited an increased capacity to adsorb and retain Cd, Ni, Zn and--especially--Cr than the mollic Leptosols; the latter, however, proved more effective in adsorbing and retaining Cu and Pb by virtue of their increased organic matter contents. Copper sorption and retention, and Pb retention, were found to be correlated with the content in organic matter and that in vermiculite--which was only present in the mollic Leptosols--in the clay fraction.

• Toxicity evaluation for the broad area of the asbestos mine of northern Greece. K. Anastasiadou, E. Gidarakos. 2007;139(1):9-18. PubMed · Publisher

  Abstract

  The existing data regarding the quality of the environment in the asbestos mine of northern Greece (MABE) region related to the presence of asbestos are insufficient to determine the current pollution problem. In the present work, a first approach to this problem has been taken through a toxicity risk assessment. The environmental quality of an open air asbestos mine was evaluated over a long period of time by measuring and monitoring the concentration of asbestos fibres in air, soil and water. Air measurements were made to determine the concentration of asbestos fibres in the atmospheric air of the mine, the depositions and the nearby villages. The asbestos fibre concentration was also specified inside the building facilities of MABE. Analyses of soil, dust and water samples were carried out showing the presence of enormous quantities of chrysotile asbestos. The concentration of asbestos fibres in the atmospheric air was compared to older measurements that were taken at the same sampling points during the operation of the mine. The results of this work, in conjunction with individual researches that have been carried out in the past and with the evaluation of international standards of scientific and experience-based findings, provide a reliable framework with which to estimate the threat of MABE to its surrounding environment, and help to determine a basic criterion for the remediation and rehabilitation of the region. In addition, mathematical models based on human and animal studies were used to estimate the probability of a person developing cancer from breathing air containing asbestos fibres in the wider vicinity of the mine in order to define appropriate procedures for evaluating asbestos-related risk.

• Microwave thermal inertisation of asbestos containing waste and its recycling in traditional ceramics. C. Leonelli, P. Veronesi, D.N. Boccaccini, et al. 2006;135(1-3):149-55. PubMed · Publisher

  Abstract

  Asbestos was widely used as a building material prior to the 1970's. It is well known that asbestos is a health hazard and its progressive elimination is a priority for pollution prevention. Asbestos can be transformed to non-hazardous silicate phases by microwave thermal treatment. The aim of this investigation is to describe the microwave inertization process of asbestos containing waste (ACW) and its recycling in porcelain stoneware tiles, porous single-fired wall tiles and ceramic bricks following industrial manufacture procedure. Inertised asbestos powder was added in the percentages of 1, 3, and 5 wt.% to commercially available compositions and then fired following industrial thermal cycles. Water absorption and linear shrinkage of the obtained industrial products do not present significant variations with additions up to 5 wt.% of microwave inertised ACW.

• Asbestos reclamation at a disused industrial plant, Bagnoli (Naples, Italy). G. Cecchetti, A. Fruttero, M.E. Conti. 2005;122(1-2):65-73. PubMed · Publisher

  Abstract

  Asbestos reclamation works were carried out at a disused industrial plant (157,000 m(2)) in Bagnoli, a high population density area of Naples. The case-study here presented recommends a new reclamation procedure that is not usually provided for by current international standards. To this purpose, a specific innovative cleaning machine (Safecar) was built in order to control the reclamation procedures also in non-confined areas. An accurate identification was planned and worked out of the various types of materials (10,111 t) present within the area, and this allowed a thorough mapping of the site to be decontaminated. Besides these reclamation activities, which were carried out in both confined and open sites, each material was cleaned, collected and encapsulated following diversified procedures, according to their characteristics. Moreover, the evaluation of airborne asbestos fibre concentrations, both within and outside the decontaminated area, assured a strict respect of environmental safety level.

• Solidification and stabilization of asbestos waste from an automobile brake manufacturing facility using cement. Y.M. Chan, P. Agamuthu, R. Mahalingam. 2000;77(1-3):209-26. PubMed · Publisher

  Abstract

  Currently, the generated brake lining waste dust, which contains asbestos as its major component, is disposed of into a secure landfill without any additional treatment. As an alternative to this, solidification/stabilization (S/S) disposal of the dust was investigated using Portland cement alone and Portland cement mixed with activated carbon (AC), as the binders. Toxicity Characteristics Leaching Procedure (TCLP) results on the solidified matrix showed that cement was able to immobilize the heavy metals, Ba, Zn, Cr, Pb, Cu and Fe, to within the limits set by the US EPA for TCLP. Addition of AC to the cement reduced the leaching of heavy metals by an additional 4-24% compared to cement alone. The pH of the TCLP leachate extracted from virgin cement, and from dust treated with cement with or without AC was found to increase to 10.9-12.5 as opposed to an initial value of 4.93 for the TCLP extract for the untreated dust. Results of ANS 16.1 (modified) leach protocol revealed that Ba in cement-treated samples showed the highest leach rate, followed by Zn, Pb, Cr, Cu and Fe. The leach rate of heavy metals decreased with progress in time. Cement mixed with AC exhibited similar leach characteristics, however, the leach rate was lower. The linear relationship between the cumulative fraction leached (CFL) and the square root of leaching time in all cement-based samples indicate that a diffusional process is the controlling transport mechanism for the leaching of the heavy metals. The obtained Leachability Indices (L(i)) of 7.6-9.1 and 8.3-9.5 for cement and cement with AC, respectively, were low but exceeded the guidance value of 6, which clearly indicates that all the heavy metals studied are retained well within solid matrices. Cement-based S/S hardening times increased from 30 to 96 h as the dust content increased from 40 to 70 wt.%. The resulting solid matrices exhibited a compressive strength ranging from 1 to 12 MPa, which was well above the specified limit of 414 kPa for such matrices. An economic analysis indicates that the disposal costs for the dust in the only available secure landfill would increase by 40.3% if one were to go for the cement S/S option. Addition of AC to the cement would escalate this by an additional 43.8%. Although the S/S of brake lining dust using cement effectively immobilized the heavy metals of concern, cost considerations may hinder the commercial adaptation of this technique for waste disposal unless new regulatory demands are implemented.

Browse every journal in the library or the library by type of article, or return to medical research.